Filter Results
$110.95 - $208.95
$125.95 - $223.95
Videos
for Backpacks
Help Articles
for Backpacks
Expert Answers
for Backpacks
I would use a protractor, see photo, place the protractor on the edge of the inside of one side of the trailer frame and the other inside edge of the trailer frame should be parallel with the 50 degree line on the protractor. Another way to verify…
view full answer...Most A-Frame Trailer Couplers have a standard of 50 degrees. I produced a short video for you showing the angle of the etrailer A-Frame Coupler, part #CA5400. I have also linked an FAQ on trailer couplers.
view full answer...It would appear that that your 1978 Airstream had the standard 50 degree a-frame style coupler. You can verify this to ensure that the etrailer A-Frame Trailer Coupler #CA-5280-RB will fit correctly on your Airstream. I personally prefer the auto…
view full answer...The standard a-frame coupler degree is 50 degrees but we do have a 32 degree coupler with the part #DM15633-81 but the rear width of it is 9-7/16 inches.
view full answer...The etrailer A-Frame Trailer Coupler w/ Round Jack Hole #CA-5280-RB uses the standard a-frame angle of 50 degrees. The length from the rear of the coupler to where the coupler meets its narrowest point is approximately 9" long. I have include…
view full answer...Thanks for all the detailed information! Given the taller height of your 2019 Chevy Silverado 2500, I recommend the 10" rise or 6" drop Equal-i-zer Weight Dist Shank item #EQ90-02-4900 you were looking at. I strongly agree with you not…
view full answer...For your 1993 Ford E350 Van the only style of trailer wiring we have is the kind that installs inline with the vehicle taillights like the T-One kit part #118343. With this kit you'd unplug your vehicle taillight connectors and plug this kit…
view full answer...I did a little digging on your grease seal number and it looks like the 16074-224 has an inner diameter of 1.5 inches and an outer diameter of 1.987 so the correct part number you would need is the #10-9.
view full answer...The correct tire chain adjusters for 12x16.5 Skid Steer Tires will be the Titan Chain Multi-Arm Rubber Tire Chain Adjusters part #TCMA2. These fit 14" - 24" diameter wheels so the 16.5" wheels you have will be a great fit.
view full answer...When installing the etrailer #e98844 on your 2020 Toyota Highlander, you'll need to scrape the undercoat so that the mounting flange of the hitch and the vehicle's frame member are in direct metal-to-metal contact. If this isn't done, the…
view full answer...I spoke with LockRack and they said the bolt for the Universal Crossbar Adapter for Lockrack Watersport Carrier #LR53FR measures 1-3/8" long and takes a 3/16 or 5 mm hex key.
view full answer...The Solera 12V Power RV Awning Conversion Kit #LC434724 that you referenced would work great as a replacement for the Carefree Fiesta manual arms you have now. This will make extending and retracting your awning much easier. I attached a review video…
view full answer...