Monitors Specs:
Features:
Plug this monitor into your vehicle's OBD-II port to get parameters (PIDs), diagnostic trouble codes (DTCs), MPG stats, and engine performance tests. Slim case has a hi-res color screen and 6-button control with user-friendly d-pad.
More Information >Monitors Specs:
Features:
Plug this monitor into your vehicle's OBD-II port to get parameters (PIDs), diagnostic trouble codes (DTCs), MPG stats, and engine performance tests. Slim case has a hi-res color screen and 6-button control with user-friendly d-pad.
More Information >Performance Tuners Specs:
Features:
Handheld tuner gives your truck/SUV significant hp and torque gains, with better fuel economy, too. 2.8" Color, hi-res screen with d-pad lets you access pre-loaded tunes, monitoring capabilities, DTCs, and calibration settings.
More Information >Performance Tuners Specs:
Features:
Conceived with a direct focus on performance results, Flashpaq boosts your vehicle's horsepower and torque. This tuner offers several power levels and user-tunable options so you can get the most out of your engine.
More Information >Performance Tuners Specs:
Features:
Handheld tuner gives your truck/SUV significant hp and torque gains, with better fuel economy, too. 2.8" Color, hi-res screen with d-pad lets you access pre-loaded tunes, monitoring capabilities, DTCs, and calibration settings.
More Information >Performance Tuners Specs:
Features:
Handheld tuner gives your vehicle significant hp and torque gains, with better fuel economy, too. 2.8" Color, hi-res screen with d-pad lets you access pre-loaded tunes, monitoring capabilities, DTCs, and calibration settings.
More Information >Videos
for Performance Chip
Help Articles
for Performance Chip
Expert Answers
for Performance Chip
The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
view full answer...That is an excellent question and is asked more often than you think. Electric brakes like what come in the Electric Trailer Brake Kit #AKEBRK-2 can be submerged in water when you are loading/unloading your boat. Since water and electricity…
view full answer...In order to install a brake controller on a dump truck you'd first need to start with a 4-way trailer connector and then adapt this to a 7-way so you can hook up a…
view full answer...The Tekonsha OEM Vehicle Wiring Harness #22121 that you referenced includes all the wiring and parts necessary to install a fully functional 7-Way connector and trailer brake controller. The included brake controller harness is compatible with and…
view full answer...Since the discontinued MaxxAir 4700k model fits a standard 14 x 14 RV vent opening, I recommend the MaxxFan Plus Roof Vent w/ 12V Fan - 10 Speed #MA00-04500K. The MaxxFan Plus comes with a thermostat and a remote for easy temperature customization.…
view full answer...It sounds like when the Redarc Tow-Pro Elite Brake Controller #RED44FR was installed on your 2022 Toyota Highlander that they may have damaged the brake signal wire or tied into the wrong wire. I recommend taking it either back to the shop who…
view full answer...I'm assuming your Express doesn't have the 7-way, but does have the capped round plug…
view full answer...The squeaking noise on your trailer is probably coming from the joints in the suspension creating metal to metal friction. So, unless your original Equa-Flex Cusioned Equalizers are damaged or corroded, what will make the biggest difference is to…
view full answer...I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we…
view full answer...You mentioned a 20 ton (40000 lbs) tag trailer with disc brakes. If you have a 20 ton trailer it would most likely come with air brakes. Next, you mention a tandem axle trailer with two 10000 lb axles and disc brakes, so I am thinking you were…
view full answer...The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.
view full answer...Since you have 3,500 lb axles you'd want a bearing kit for this axle capacity and not a 7k axle as the bearings and seals are totally different. For a 3,500 lb axle…
view full answer...Filter Products (12)