The closest step pad available is Replacement Step Pad for Westin Platinum Series Nerf Bars - 20" Long - Qty 1 # 26-0001. This measures 19-13/16" long and has 4 pegs. The outer pegs measure about 5-15/16" from each other, while the inner pegs measure 6-5/8" from each other. This is not a confirmed fit for your DeeZee running boards so you will want to measure to verify compatibility. If this doesn't match up then you will want to contact DeeZee for replacements. view full answer...
Based on your photo, it appears you have the dual cam system of the Reese Strait-Line. I researched your trailer to find a GVWR of 5895. Based on this, we can make some calculated assumptions on the tongue weight. The tongue weight of a trailer is typically 10 to 15%, so that would put you at 590 to 885 lbs. That will make the correct system the Strait-Line Weight Distribution System w Sway Control # RP66084.
For the replacement parts you will want the following:
Replacement Head... view full answer...
We have you covered because the correct replacement mounting hardware for the Westin Sportsman Grille Guard # 40-0145 on a 2003 Dodge Dakota is the Replacement Hardware Kit for Westin Sportsman Grille Guard # 40-014PK. view full answer...
There isn't a kit for the old Reese 15K hitches but there are replacement parts. Here is a list of the available replacement parts:
Pins, # 6014
Handle grip, # 58094
Handle, # 58055
Clip rings, # 58054
Spring, # 30776
Head pin, # 6020PIN
Legs, # RP30727 (for fixed hitches)
Actuating rod, # 30579 (for slider hitches) view full answer...
The correct replacement cover for your TruXedo Lo Pro Soft Roll-up Tonneau Cover # TX548901 on your 2010 Dodge Ram 3500 8' Bed is the part # TX5489-CVR.
There are a handful of replacement covers that we carry but this is the exact replacement for your tonneau cover! view full answer...
I spoke with my Westin rep, and was told that the correct hardware/bracket kit for your older 3 inch Platinum nerf bars for a 2003 Dodge Ram 3500 quad cab is part # 23-231PK. view full answer...
We do carry a replacement trap for the Extang full tilt on your 2005 Ram 1500 quad cab short bed. We have the replacement tarp # EX5770 (with snaps) or the # EX37770 (without snaps). Both of these covers are designed to fit your 2005 Ram 1500 with a 6-1/2' bed. view full answer...
I'm glad you're happy with your Recessed LED Lights # 324-000099. These produce what is typically called a warm-white light, meaning they output light with some red hues. Warm-white light like this is typically in the range of 2700K to 3500K. This is about the same color light as produced by a standard 60-watt incandescent bulb.
We offer LED "bulbs" as replacements for a range of popular RV light bulbs. Some of these LED replacements offer the warm-white output color, such as # DI74ZR... view full answer...
To get replacement hardware for the Draw-Tite Max-E-Loader 41533 you need to order part # RHK on our site and input the hitch part number. Once you place your order we'll get all of the hardware put together in a replacement kit and send it out to you! view full answer...
The answer to your question depends on what exactly was damaged. The closest thing we have to a replacement wiring harness is the 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket, Chrysler/Dodge OEM Plug Adapter # HM40975-11933. This replaces your connector as well as the wiring harness that plugs into your factory port at the rear. If you damaged anything beyond that factory port then you will have to get a replacement from the dealer. view full answer...
You will need the Firestone Rear Air Spring # F9002 to replace the air spring on your 2003 Dodge Dakota 4wd. These were the springs used on the Firestone Ride-Rite Kit F2162, which has been discontinued. view full answer...
Yes, to replace the end caps for the Westin Sure-Grip Running Boards w/ Custom Installation Kit # 27-6135-1975 on your 2017 Dodge Durango you need part # 80-0221 for the front driver (or rear passenger) side and part # 80-0220 for the front passenger (or rear driver) side. view full answer...
The Replacement Locking Ratchet Arm Assembly for T2 Bike Carriers # 752-1272-001 is about 1-1/2 inches longer than the original T2. This helps especially with Fat Bike Tires. I can only assume that it will eliminate your fork contact issue without knowing your bike as obviously fat bike tires require a wider fork as well. This arm also has the integrated cable lock so you may want to get the lock cores # TH450200 to take advantage of that feature. view full answer...
The correct replacement hardware and bracket kit for the Westin HDX Grille Guard with Punch Plate part # 57-1955 which is a fit for a 2007 Dodge Ram 3500 is the Replacement Installation Hardware Kit part # 57-195PK. This is all we offer as far as replacement parts go.
Please note, these guards aren't universal, if the guard didn't come off the same type of truck it was previously on then it won't work. view full answer...
We do have a replacement hub that can work. Unfortunately, it is not a 5 on 4.5. The only replacement hub we have that will fit your axles. Trailer Hub Assembly - 3,000 lbs Axles - 4 on 5 - Agricultural, part # AH15450ECOMP. Going with these hubs will require you to get new wheels to match this lug pattern or cut off the spindles and weld on new spindles that will accommodate a different hub. view full answer...
To replace lost keys from a Rhino-Rack Fishing Rod Carrier # RR576F you'll need to know the numbers off the front of the lock cores; a lock core with the number 012 on the face would use the replacement key that comes with the Rhino-Rack Masterkey Lock Barrels - Keyed Alike - Qty 2 # RRRK012-2.
If you can let me know what number is on your lock cores I can help you locate a replacement key. view full answer...
You will need the Replacement Tarp for Extang Tuff Tonno Soft Roll-Up Tonneau Cover, part # EX13430. This replacement tarp will work with your Extang Tuff Tonno cover. view full answer...
If your 2002 Dodge Ram 1500 has the harness with the round connector like the one in the attached photo, you may only need to replace the 7-way connector that is mounted on the bumper of your truck. I would recommend the Hopkins Endurance Quick-Install 7-Way Trailer Connector, part # HM40940. This would replace just the 7-way mounted on your bumper, and comes with the mounting screws.
If you are wishing to replace the entire harness and the 7-way connector, the Hopkins Endurance Quick-Install... view full answer...
We have a handful of replacement trim moldings from JR Products that you can use for your window! I'm not exactly sure what came on your 2007 Cameo 5th wheel RV but this trim comes in 25' lengths and then 2 different widths:
3/4" Width
White - # 37211245
Black - # 37211235
1" Width:
White - # 37210025
Black - # 37210015
Colonial White - # 37210035 view full answer...
The replacement cover that you need for your discontinued Extang Full Tilt 2.0 8770 (with snaps) or 38770 (snapless) is the Replacement Tarp for Extang FullTilt Soft Tonneau Cover # EX5770 (with snaps) or the # EX37770 (without snaps). Both of these covers are designed to fit your 2003 Dodge Ram Pickup (6-1/2 ft. bed). view full answer...