You can use the Pollack 7-Pole Trailer Socket, # PK12-707E, on your 2001 Dodge Dakota quad cab. Keep in mind, this is not an OEM replacement socket, so the wires will need to be attached to each terminal in the socket. I have attached a photo showing how this socket should be wired. It is important that you wire the socket by function and not wire color since vehicle manufacturers are not known to follow an industry standard color code.
If you are replacing an OEM 7-way, then you may... view full answer...
The correct OEM replacement for the 7-way wiring harness on your 2010 Dodge Dakota is the # PK11933. If your 7-way was damaged when it melted you can replace both using the # HM40975-11933. There is no option that comes with a built in T that would allow you to run 5th wheel/gooseneck wiring. The only option would be to buy a complete wiring harness and add it in like the # C56001 you were looking at. view full answer...
We do have the Replacement Hardware Kit # AABRKT-5055 that is compatible with the Aries Grill Guard # AA5055 for your 2010 Dodge Dakota 4wd.
The Hardware Kit # AABRKT-9047 you found is for a Grille Guard # AA9047 on a 2005-2021 Nissan Frontier or 2005-2007 Nissan Pathfinder. view full answer...
The Extang BlackMax tonneau you have is the part # EX2760 on your 2005 Dodge Dakota with a 6-1/2 foot bed. That means the correct tarp replacement would be the part # EX1760. view full answer...
We currently have a 1-1/4" Wide # TX1115173 and 1" Wide # TX1117877 Velcro strip for tonneau covers. These are the closest we have to the 1-1/8" measurement you have. These are both 8' long as they can be trimmed down to fit your 5-1/2' bed length. These are both designed to slide into a rail and are held in place with screws at the ends. view full answer...
The Replacement Mounting Hardware Kit # BAKBK-200KIT referenced in your question is the correct hardware bag for many (but not all) of the BAKFlip Tonneau Covers models. I spoke with my contact at BAK Industries and she did say that this is the correct kit for your 2007 Dodge Dakota, whether you have the BAKFlip G2 # BAK26206 for the 5 foot bed or # BAK26205 for the 6-1/2 foot bed.
The kit includes everything needed to actually install the cover - essentially everything but the rails... view full answer...
The TruXedo TruXport tonneau cover that fits the 2008 Dodge Dakota with 5 foot bed is TX250901 if the truck has the Trac system or TX250801 if it does NOT have the Trac system.
If you have the Trac system model then the replacement cover only is # TX2509-CVR.
If you do not have the Trac system model then the replacement is # TX2508-CVR. view full answer...
Yes, the Short Left Leg # LC342610 is paired correctly with the Short Right Leg # LC428493 for the Lippert Ground Control 3.0 leveling system. The foot pad is not removeable though so you'll want to take that into account for your clearance.
Attached is a review video for you to check out. view full answer...
We have you covered because the correct replacement mounting hardware for the Westin Sportsman Grille Guard # 40-0145 on a 2003 Dodge Dakota is the Replacement Hardware Kit for Westin Sportsman Grille Guard # 40-014PK. view full answer...
Great news! The part you are looking for is the # RM-650902. This 6 foot cable will connect the ICX module to the EvenBrake Unit.
I have linked it to this page for your convenience, the price will be listed next to the part. view full answer...
Thank you for your many purchases from etrailer. We appreciate your trust and repeat business.
You purchased the Timbren axle-less suspension kit with brakes and straight spindles, part # A35RS545E.
The bearings used in this kit are inner # L68149 and outer # L44649. Inner race is part # L68111 and outer race is part # L44610. The 10-19 grease seal is part # RG06-050, sold as a pair. view full answer...
We have the chrome perfect match bumpers that will fit all models of your 2000 Dodge Dakota Quad Cab. You will need part # 31012. The universal bumpers will not fit Quad Cab models. view full answer...
It sounds like you are actually looking for just the Roadmaster Base Bar for Towbars # RM-067.
This product will attach to the quick disconnects on the vehicle.
I have linked it to this page for your viewing and purchasing convenience. view full answer...
The correct replacement tarp/cover for the Extang FullTilt with Snaps on a 2006 Dodge Dakota Quad Cab is going to be part # EX57GR. view full answer...
Because you specified the brand and snap on cover, I believe we have exactly what you are seeking. The only cover we have meeting your criteria is the Replacement Tarp for Extang BlackMax Soft Tonneau Cover - Black # EX1670. view full answer...
The Replacement Cover for Extang FullTilt SL Vinyl Tonneau Cover # EX37670 is the correct replacement for your Extang FullTilt SL Soft Tonneau Cover # EX38670.
We unfortunately do not carry replacement side rails for your Extang Full Tilt SL, however if you are open to a full replacement, the Extang Trifecta 2.0 Soft Tonneau Cover # EX92670 is one of our most popular products and is a guaranteed fit for your 2002 Dodge Dakota short box. view full answer...
Yes, end caps are available for the Rhino-Rack Vortex Aero crossbars like the # RRVA118B-2. For locking end caps, you can use part # RRVA-LEC4. We only sell end caps in quantities of 4. view full answer...
The MagnaFlow Universal Ceramic Catalytic Converter you mentioned, part # MF447104 is 50-state EPA and California Air Resources Board (CARB) approved.
It is indeed legal for use in California. view full answer...
The Extang Platinum Classic Tonneau Cover that fits your 2004 Dodge Dakota is part 7750. Since you are looking for only the tarp you will want the part # EX6750 which replaces just the tarp for part 7750.
To help extend the life of your Extang Tonneau Cover we have the Extang Tonno Tonic Protectant Spray, part # EX1181. You just spray it on and wipe your tarp clean! view full answer...
The correct replacement tarp for the Extang Trifecta 2.0 Soft Tonneau Cover # EX92760 is the Replacement Tarp for Extang Trifecta 2.0 Soft Tonneau Cover # EX34VJ. This replacement tarp is constructed of black vinyl, just like your original, and will require the original hardware for installation, so make sure you hold onto any hardware as you remove your old tarp. view full answer...