Replacement Bracket/Hardware Kit for Westin 3 Inch Platinum Nerf Bars on 2003 Ram 3500 Quad Cab

Question

Question:

I have a 2003 Dodge Ram 3500 quad cab with Westin Plantnum3 nerf bars. Can you tell me what is the proper replacement hardware package I would need.

asked by: Rob N

0

Expert Reply:

I spoke with my Westin rep, and was told that the correct hardware/bracket kit for your older 3 inch Platinum nerf bars for a 2003 Dodge Ram 3500 quad cab is part # 23-231PK.

expert reply by: Mike L

0

Answer 1

The correct replacement hardware for a 2004 Dodge Ram 3500 quad cab would be the part #23-231PK but this will only work with bars that were originally designed as a fit for your truck. You aren't able to adapt bars from a different truck by just…

view full answer...

Answer 2

The two hardware kits fit similar Dodge trucks but the big difference is the style of cab that both trucks fit. The #23-232PK is for regular cab trucks like the following: 2002 - 2002 Dodge Ram Pickup 1500 - Regular Cab 2009 - 2009 Dodge Ram Pickup…

view full answer...

Answer 3

I have a solution for you, but the #23-232PK are designed for the Westin #23-2320 and #23-2325 bars. I spoke with Westin and they confirmed that #23-231PK is the correct installation hardware kit for your Platinum Series bars to fit on your 2007 Ram…

view full answer...

Answer 4

The Nerf Bars that install with the hardware you referenced do attach to the frame, as you can see by the accompanying cut out of the instructions that I added. It is important to note that the Replacement Mounting Brackets and Hardware for Westin…

view full answer...

Answer 5

You can refer to the linked page that displays all six Westin brand round nerf bars (tube steps) that fit on the 2003 Dodge Ram 1500 Quad cab pickup. Use the photos to determine which one you have. Once you know which bars you have you can check on…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 9

I would love to help you but I looked online and at our selection and R215/75 R18 is a really odd tire size and I recommend verifying that's what is on your 2017 Ram 3500. We don't have any tire chains or cables that will fit that size. I…

view full answer...

Answer 10

The Viair EVC Battery Powered Tire Inflator #VA88JR weighs only about 2 lbs. The compressor itself (not including the hose) is 6-1/4" tall x 2-3/4" wide x 1-7/8" deep. I have attached a dimensional drawing below for your reference.…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...