We do have a replacement 7-way kit that fits your 2000 Dodge Durango that has the square connector you mentioned as well with the part # HM42190. view full answer...
Electric trailer brakes like the etrailer # AKEBRK-35R that you referenced should be selected based on your axle capacity and brake flange mounting pattern. The brake you referenced fits 4-bolt flanges with a 2-7/8-inch hole spacing and is suitable for use on a 3500-lb axle. These brakes fit hub/drums with a 10-inch diameter x 2-1/4-inch width, such as # AKHD-545-35-K.
For washers and bolts to mount these brakes use kit # BIK-00; you'll need one kit per wheel.
For tang washers for E-Z... view full answer...
To replace lost keys from a Rhino-Rack Fishing Rod Carrier # RR576F you'll need to know the numbers off the front of the lock cores; a lock core with the number 012 on the face would use the replacement key that comes with the Rhino-Rack Masterkey Lock Barrels - Keyed Alike - Qty 2 # RRRK012-2.
If you can let me know what number is on your lock cores I can help you locate a replacement key. view full answer...
Yes we do have the Replacement Key HF344 # GL43FR. This key will fit FIC RV entry and baggage doors with the HF, EF or CF prefix and number 344. view full answer...
Nut is the term used for that threaded collar inside the jack. And the screw would be the other part. The nut is not available by itself but you can get it with the screw (not a bad idea since there could be damage to the screw as well). If you have a 12K capacity Bulldog jack, 182 series, from 2003 to present then you would use # BD500217.
If it is rated for 10K lift and 12K support then you would use # BD500250. view full answer...
We do have a few options for you to choose from to replace the single step on your 2017 Keystone Springdale 245RB.
Out of the available choices I recommend either going with the SolidStep Manual Fold-Down Steps # LC791572 which mount to your threshold or, if you want the same style step, the Hickory Springs Manual Pull-Out Steps # 95324EXTALC1 and using the Outriggers # LC301704 to relocate your mounting brackets.
You are correct that there are no steps with mounting brackets 26" apart... view full answer...
The receiver for the remote will likely be near the control panel as it will hard wire to it. You will want to look for the unit which looks like the Replacement 5-Function Remote Receiver with Replaceable Fuses # LC305117. If it is not there, you will need to purchase it so the Replacement New-Style Linc Analog Remote # LC292614 will be compatible.
You may also be interested in the Replacement Touchscreen Remote w/ Charger for Lippert Ground Control 3.0 Electric Leveling System # LC358601... view full answer...
I'm sorry that happened, but the good news is we do have replacement straps for the K-Source Universal Towing Mirrors - Clip On - Convex Mirror # KS3891-2. So if this is the mirror you have what you can get is the following:
- Replacement Ratcheting Straps for K-Source Universal Towing Mirror - Clip On # KS3891STR view full answer...
Yes we definitely carry replacement channel strips. From looking up your crossbar order, you purchased the Rhino-Rack Vortex Aero Crossbars - 54" Long # RRVA137B-2 for your roof rack setup on your 2017 Dodge Durango. For replacement channel strips, you need the Replacement Vortex Strip for Rhino-Rack Vortex Aero Crossbars - 15-3/4" Long - Qty 1 # RRM626. It is important to note that this only comes with a quantity of one strip. So, if you need more than 15-3/4 inches of replacement strip... view full answer...
Based on your photo, it appears you have the dual cam system of the Reese Strait-Line. I researched your trailer to find a GVWR of 5895. Based on this, we can make some calculated assumptions on the tongue weight. The tongue weight of a trailer is typically 10 to 15%, so that would put you at 590 to 885 lbs. That will make the correct system the Strait-Line Weight Distribution System w Sway Control # RP66084.
For the replacement parts you will want the following:
Replacement Head... view full answer...
The Replacement Locking Ratchet Arm Assembly for T2 Bike Carriers # 752-1272-001 is about 1-1/2 inches longer than the original T2. This helps especially with Fat Bike Tires. I can only assume that it will eliminate your fork contact issue without knowing your bike as obviously fat bike tires require a wider fork as well. This arm also has the integrated cable lock so you may want to get the lock cores # TH450200 to take advantage of that feature. view full answer...
Yes, to replace the end caps for the Westin Sure-Grip Running Boards w/ Custom Installation Kit # 27-6135-1975 on your 2017 Dodge Durango you need part # 80-0221 for the front driver (or rear passenger) side and part # 80-0220 for the front passenger (or rear driver) side. view full answer...
It looks like you have a Roadmaster tow dolly. If that's the case, the ratchet itself is part # RM-2110 and the ratchet mounting bracket is the part # RM-2000-31 that you'd looked at. The bracket and ratchet will fit either the driver or passenger side of the tow dolly. There is noRM dedicated right or left side part. view full answer...
The Sears X-Cargo rooftop carriers were made by Thule/SportRack and over the years the lock hardware changed. In some cases original replacement parts will not be available but substitute parts can be used to keep the box in service.
For a hook-type lock, latch and key kit we offer part # SR03807 and for a removable lock core kit we have part # TH450200. If neither of these matches your box please send us a photo to show us what lock it has. view full answer...
We do not offer replacement keys for the Blue Ox tow bar. If you wish to replace the hitch pins we do carry them, and they come with 2 keys per lock.
You would need to order the Blue Ox Base-Plate and Receiver Lock Kit, part # BX88101. This kit includes a qty of (2) 1/2 inch diameter deadbolt style locks. The kit also includes (1) 5/8 inch diameter lock that secures the tow bar to the hitch. view full answer...
To replace the rubber pad for the Rhino-Rack roof rack on your 2017 Dodge Durango you're going to need the DK Fit Kit # DK299 as Rhino-Rack doesn't sell the pads individually (although you may be able to find one at a used parts dealer). view full answer...
Since there are no custom fit tow mirrors that fit your 2017 Dodge Durango your best option would be a set of universal tow mirrors like the K-Source part # KS3990 which we had the chance to install on a similar Durango and found they fit well. Check out the install video link I attached that shows this. view full answer...
We can offer you a choice of steel, aluminum or even bracket-mount plastic replacement fenders that will work on your single-axle trailer with 15-inch wheels. You also have a choice of fenders that include steps if you like. The linked page will show you all trailer fenders that will work with 15-inch wheels and the filters on the page will let you sort the results based on your preferred material, features and installation method.
If you prefer a weld-on steel fender without a step we... view full answer...
Go To Results