Based on the unloaded tongue weight you mentioned the Blue Ox TrackPro weight distribution system you'd want is the part # BLU23FR which has a tongue weight range of 600-800 lbs instead. The part number you referenced would be rated too high which would cause a rougher ride quality. view full answer...
I would be happy to go over the options for installing a trailer brake controller in your 2021 Toyota Sequoia Platinum with the factory tow package.
Since you have the factory tow package you can easily install a trailer brake controller like the Redarc Tow-Pro Elite # RED44FR you were looking at by using a plug-in wiring adapter. For this specific controller you would need the # 3040-P which plugs in to the factory trailer brake controller port underneath the dash of your vehicle along... view full answer...
The Timbren suspension enhancement part # TTORSEQ1 that you referenced is a fit for your 2010 Toyota Sequoia and will help level your suspension when towing but you should note that these do not increase the towing capacity of your vehicle. You should check your owners manual to determine if you have the capacity for your trailer and be sure not to exceed this figure. view full answer...
For both of the standard tire sizes for your 2010 Toyota Sequoia of 275/65-18 and 275/55-20 the same tire chain sizes are listed. So for either size I would recommend the part # TC2327 if you have an Class S chain requirement (see owners manual). Or, if you don't and you want max mud traction the part # TC2439 would be really great with the bigger twisted links. view full answer...
A transmission cooler is very inexpensive insurance for your transmission, so I would highly recommend the Derale 8000 Series Transmission Cooler you referenced, part # D13503.
Although your dry weight is 1600lbs less than the vehicle towing capacity, once you add gear and fill water or propane tanks, you will be climbing closer to that 6500lb figure.
The cooler measures 11 inches x 8 inches, and is 7/8 of an inch thick. You will want to take a look in front of your radiator directly... view full answer...
We can help you with checking or replacing your pop-up's brakes and also with selecting a trailer brake controller.
I have linked an article that covers the process for testing electric trailer brakes. Please let me point out that often replacing specific brake parts carries almost the same cost as buying a whole new replacement. Just keep in mind that your time to do the repairs may make just replacing them easier overall. If you do need to change out your magnets you can use the linked... view full answer...
Our Blue Ox TrackPro part # BLU47FR is the same as the BX0850. Blue Ox used to have all of their systems in that grey/bronze finish that you mentioned but they recently started making them more of a black color. This is especially true for the TrackPro systems which are darker still than the SwayPro systems. Also the picture currently on Blue Ox's site is a computer rendering which makes it look more gray in color. view full answer...
The Blue Ox TrackPro part # BLU47FR would work great with your Grand Design XLS 22RBE and your 2018 Toyota Sequoia SR5. I looked up the weight of your trailer and since it looks like the loaded tongue weight of the camper would fall right in the middle of this system TW range of 600 to 800 lb it would work well. view full answer...
Yes, you can use any of the 2" hitch mount bike racks once you install a front mount hitch on your 2021 Toyota Sequoia. I recommend checking out the Curt # 31198 because the Curt hitches tend to have a thicker powder coat so it will hold up to the elements better.
For a bike rack I recommend checking out the RockyMounts HighNoon FC Solo Bike Rack for 1 Bike # RKY87RR because it's a 1-bike rack that can hold up to a 60 lb bike with a 5" wide tire. Unlike other wheel-mount racks, this rack... view full answer...
The Camco RV and Marine Adjustable Cutlery Tray # CAM43503 is adjustable to your current cabinet drawer. We don't have stand alone drawers but this will adapt your current options. view full answer...
If your 2004 Toyota Sequoia has a factory 7-way trailer connector at the rear of it (it looks like yours does) all you would need to install the Prodigy P3 brake controller part # 90195 is the correct harness part # 3040-P.
This adapter plugs into the 5-pin connector on your vehicle's built-in brake control wiring harness. The harness is located underneath the dash, to the left of the steering column, taped to another harness near the emergency brake pedal. I attached an install video... view full answer...
The first thing you are going to need to determine is the total tongue weight. This is the tongue weight of the trailer when loaded and ready to tow plus the weight of anything loaded behind the rear axle of the tow vehicle. I have included a link to an FAQ article explaining how to measure tongue weight.
With a dry tongue weight of 585 pounds, you will most likely end up over 600 pounds when loaded and ready to tow. If your total tongue weight ends up being in the 400 to 800 pound range... view full answer...
There are a couple of ways you could add a 5-Way flat to your 2006 Toyota Sequoia. I recommend a more direct method. You can use the Adapter 4 Pole to 5 Pole Trailer Wiring Adapter, # 20036. One end plugs into the 5-Way on the boat trailer, the other end plugs into the 4-Way on the vehicle.
The 4-Way end has an additional wire for the extra function that is on the 5-Way end. If the extra pin on the trailer is used for an electric reverse lockout, you would connect the blue wire to the... view full answer...
A frame-mounted hitch for your Keystone Passport is a much better option than a bumper-mount type, both for stability and for weight capacity. We offer several frame-mount RV hitches with capacities up to 500-lbs of tongue weight. All such items are shown on the linked page.
The key is checking your trailer's frame width to find the best match and the required capacity. We also have some with drop, such as Curt # C13701 which has its 2-inch receiver 2-inches below the crosstube. view full answer...
I like the whole heavy duty overkill aspect of a build. I see no reason why you wouldn't want to install the Titan Brake Actuator # T1735200. This way you know that your M116A3 Military Trailer is tough enough for anything you throw at it. As long as it fits, I say go for it! It will fit a 3" wide channel tongue providing a 3" drop on a 2-5/16" ball. It will need to be welded on. view full answer...
The closest option we have to exactly what you mentioned is the # D210 which is a ball mount and hitch opening dual setup but it has a 2 inch drop. If you have trailer now and you are wanting an additional hitch opening for an accessory the Stormberg Bike Bunk part # CC-275 is a great solution as it gives you an additional hitch opening higher up on the a-frame trailer.
See attached picture and review video. view full answer...
Trailer brake controller installation in your 2015 Toyota Sequoia Limited with the tow package will be a simple process. Vehicles that have the tow package include a 7-way trailer connector as well as a connection point under the dash for easy plug-in installation of a brake controller such as the Prodigy P2 # 90885.
In this case all you need is the controller and the matching installation harness # 3040-P. The harness plugs in between the back of the P2 and the connection point under... view full answer...
For your 2010 Toyota Sequoia SR5, the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # 13442 is a confirmed fit. This is an easy bolt-on installation with a rating of 6000 lb towing and 600 lb tongue weight, so it will limit your vehicle to this capacity unless you use a weight distribution system. There is no drilling required for this installation.
If you don't have the factory tow package, but would like to use this hitch receiver for towing or a lighted accessory, I... view full answer...
You would need to convert the 4-way to a 7-way so that you can install the brake controller. For that you will want the Brake Controller Install Kit and 7-Way Adapter part # ETBC7. I attached installation instructions and an install video for this product as well.
For a brake controller I would recommend the Prodigy P2 Brake Controller part # 90885. This is our best selling brake controller because of how well it works and how easy it is to setup. view full answer...
The Black SumoSprings Solo Custom Helper Springs # SS78DR having he higher weight capacity of 1,800lbs will not compress as far as the Blue # SS68DR with the same amount of weight. Do remember that with these on your 2006 Toyota Sequoia since the black springs are stiffer you will get that back as a firmer ride when you are unloaded.
The best way to help with your rear sag is with a Equal-i-zer Weight Distribution System # EQ37060ET. This will allow you to transfer the weight from the... view full answer...
Go To Results