A platform-style bike rack is a great choice to carry your bikes. The padded hooks are adjustable on the upright mast to accommodate bikes of different sizes. However, due to the severe dip in the frame bar of cruiser bikes, like you referenced, using a bike adapter bar to secure the hook of the bike rack is a good idea.
I recommend using the Swagman Easy-out Women's and Alternative Frame Bike Adapter # 64005. The bike adapter bar secures at the handle bar post and the seat post to provide... view full answer...
You will want to check the owner's manual or with your dealership to find out what the roof weight capacity of your 2004 Hyundai Sonata is. You will not want to exceed the maximum roof weight capacity.
For a cargo bag I recommend the Rightline Gear Roof Cargo Carrier, part # RL100S20. This cargo bag is made of waterproof material, has 15 cu ft of room and features straps that will run through the Sonata's interior and around the carrier.
If you want to secure the bag to the rain gutters... view full answer...
The correct Yakima towers to use on the bare roof of your 2019 Hyundai Kona are indeed the BaseLine Towers # Y28TR that you referenced. These are the only Yakima towers that will work on your particular vehicle. To use these with your existing round bars you will just need to add the RoundBar SL Adapter # Y03536. This kit includes all 4 of the needed adapters for each of the towers.
In addition to the towers themselves you will also need the Front Fit Kit # Y06175 and the Rear Fit Kit... view full answer...
There are no aftermarket options for a hitch for the 2023 Hyundai Ioniq 6 and there don't seem to be any plans to make one. The best solution would be to use the Curt Weld-On 2" Receiver for Custom Fabricated Hitches # E17. You could take this to a local fabricator and have them fashion a hitch that will fit your Ioniq 6. view full answer...
I may have an option for you, the Draw-Tite Max-Frame # DT52GR has the 2" receiver and is a confirmed to fit your 2021 Hyundai Kona Electric.
I am not sure how heavy or large your photo booth is it may work with the 19x47 Curt Cargo Carrier # C18110 which will work perfectly in the # DT52GR. Now since this carrier weighs 30lbs you will need to make sure your photobooth does not exceed 270lbs so you can stay under the 300lb rating of your hitch. You will also need to check if your Kona... view full answer...
There is a trailer hitch available for your 2017 Hyundai Ioniq as long it is not the Electric model, but the trailer hitch for a Hyundai Sonata will not fit due to differences in the vehicle attachment points. If you have an electric model there is not a trailer hitch receiver currently available, so you will need to use a different vehicle to transport your e-Bike.
You will need the Curt Trailer Hitch Receiver # C11486 which has a 200lb tongue weight rating so it will be able to carry... view full answer...
The Draw Tite Hitch part # DT74MR that you referenced is a fit for your 2021 Hyundai Sonata Hybrid Limited. With just this hitch you'd have everything needed to install a bike rack like our very popular Hollywood Racks Trail Rider # HR200Z that fits this hitch. view full answer...
Yes both the roof racks you mentioned do fit your 2020 Hyundai Elantra:
Thule part numbers # TH711420, # TH710501, and # TH145069
Rhino Rack # RRVA118B-2, # RRRLKVA, and # DK461 view full answer...
I have a really great Class III hitch option made by the same company as the Hidden Hitch you mentioned but the 87544 does not fit your vehicle so you'd instead want the Draw Tite part # 75471 which is a confirmed fit for you vehicle.
I attached an install video for this hitch as well as a picture that shows what it looks like installed as well. view full answer...
The SeaSucker Monkey Bars Roof Racks are only available in the 48" long size, part # 298-SX6000B. There is not a longer (or shorter) bar size available for this particular system.
If you can tell me what model vehicle you are wanting to equip with a roof rack, along with its roof configuration (bare roof, factory side rails, etc) I will be happy to make a different recommendation that uses longer crossbars. view full answer...
The lowest priced roof rack option we offer for the 2020 Hyundai Santa Fe with a bare roof would be a round bar rack from Yakima. The rack would consist of the following parts:
• Yakima 48 Inch Round Crossbars, part # Y00408
• Yakima BaseLine Roof Rack Towers, part # Y28TR
• Yakima SL Round Bar Adapters, part # Y03536
• Base Clip Fit Kit # Y06151
• Base Clip Fit Kit # Y06154
Unfortunately, the Malone # MPG215 rack you'd looked at isn't' a fit for your Santa Fe.
I've linked you to an... view full answer...
Bikes with fenders also typically have frames that are at least a little unique too so fitting them to a bike rack can be interesting but we have it covered pretty easily. A really great option is the Thule DoubleTrack Pro XT Part # TH92BJ. This grabs the bike by the frame with it's unique clamp setup that allows it to essentially fit any frame style so it's a really great option for a bike with fenders like yours. view full answer...
We installed the CIPA tow mirror part # CM11980 on a 2017 Hyundai Santa Fe and found it fit and worked really well. I attached an install video and picture for more info for you to check out as well.
I wasn't able to find any info on the blind spot sensors of your vehicle but we have not had any reports back that these mirrors interfered with them so I'd be inclined to think there wouldn't be any issue at all. view full answer...
As long as you have a hitch installed on your 2014 Hyundai Santa Fe like the Curt part # C13153 which is rated for weight distribution you'd be fine. This would be a great solution to allow you to tow your weight capacity safer too.
For a weight distribution that would work well we have the part # RP66082 which has a tongue weight range of 200-600 lbs and has the only sway control system on the market that's designed to fight sway before it starts.
For a 2 inch ball you would want part... view full answer...
The Thule Motion XT Rooftop Cargo Box - 18 cu ft - Black Glossy, part # TH629806, is a great option to carry luggage, beach chairs, and umbrellas. It is a 18 cu ft rooftop cargo box, so it is fairly large. It comes with integrated tie-down points and 3 load straps to secure your load. I prefer the low profile rooftop cargo box. You get better gas mileage with the low profile option and they are typically a more sleek option.
I have included a video review link below. view full answer...
The Swagman Semi 2.0 Platform Bike Rack, # S64686, would work well with your carbon fiber framed bike. The bike rack uses a wheel hook arm design to secure the bikes to the rack. These hook arms will not be in contact of the frame of your bike.
The Swagman Semi 2.0 can carry a bike with a wheelbase as large as 50 inches and as small as 37 inches. So, if the wheelbase of the kids bike falls in between these numbers, then the bike can be secured to the bike rack.
If the wheelbase of the... view full answer...
Because your 2015 Hyundai Accent hatchback has that spoiler at the top of the rear hatch I recommend only one type of trunk mount bike carrier; the Hollywood Racks Over-The-Top racks # HRF2 for 2 bikes or # HRF2-3 for 3 bikes.
These racks have additional upper arm pieces that move the top straps up and over that spoiler so no weight is put on it (since the spoiler is not meant to support weight). I have included a link to a video that shows how it works.
If you will be carrying any bikes... view full answer...
The only base plates which are a fit for your 2011 Hyundai Accent are indeed the Blue Ox # BX2323, which will work with your automatic transmission so long as you do not have foglights. You will not need to unplug a fuse on your Accent to tow it, though there are a number of other parts you'll need.
For a tow bar I recommend the Blue Ox Alpha # BX7380 which is compatible with the aforementioned Blue Ox base plates and even comes with safety chains. You are also going to need wiring to... view full answer...
I believe I have a solution for you! Taking into consideration the space limitation you have and your resistance to cutting into your bumper, you can use the Draw-Tite, No-Drill Mounting Bracket # 18136 with the Universal Installation Kit # ETBC7. I have attached a brief installation video of the # ETBC7 on a similar vehicle.
From there, because you are installing a 7-way, you will also need a 4-pole flat that will connect to whatever accessory you are installing, whether it be a brake... view full answer...
Honestly I do not recommend the Thule OutWay # TH65JV just because of the weight and damage it has caused other vehicles. Especially on a brand new vehicle such as your 2013 Hyundai Sonata.
Thule makes excellent racks, but this one was not executed well. Some people have used this rack without problems but I never feel safe recommending it just because of that risk.
For a much better Thule trunk mounted bike rack that will work on both vehicles and work very well check out the Thule OutWay... view full answer...
Go To Results