Expert Answers about Chrysler PT Cruiser
- How to Transport Bikes with a 2005 Chrysler PT Cruiser Convertible
- For the 2005 Chrysler PT Cruiser I have a solution that will allow you to transport bicycles, but there are no trunk racks confirmed to fit the convertible models.
Instead you would want a hitch mounted option. For a hitch the # 24759 has been confirmed to fit all models of the PT Cruiser so it would work well for you.
The Swagman XTC2, part # S64670 is one of the most popular racks because it's so easy to use, and because the rack has an angled shank that would raise the bike rack up...
view full answer... - Correct Ball Mount Recommendation to Tow Malone EcoLight Trailer with PT Cruiser and Curt Hitch
- You asked a great question about picking out the correct rise/drop ball mount for towing the Malone EcoLight Trailer part # MAL53FR. Basically you want to go with the ball mount that has the correct rise/drop to allow the trailer to sit as level as possible. So when the Curt hitch part # C11132 is installed on your 2010 Chrysler PT Cruiser it's going to have a distance of 11-1/4 inches from the top of the hitch opening down to the ground and the Malone trailer has a distance of 15 inches...
view full answer... - Roadmaster Brake Master Braking System for an RV with Hydraulic Brakes Only
- If your RV has hydraulic brakes only then # RM-9160 will not work. Instead you will need Roadmaster BrakeMaster Braking System with BrakeAway for RVs with Hydraulic Brakes - Proportional Item # RM-9060. Or you could switch to a different braking system such as one of the portable models like the Even Brake # RM-9400. I have included a link to all of the portable systems for your 2006 Chrysler PT Cruiser.
view full answer... - Trailer Hitch Receiver and Towing Capacity for 2007 PT Cruiser
- According to the owner's manual I looked up online, your 2007 Chrysler PT Cruiser has a maximum towing capacity of 1,000 lbs and tongue weight capacity of 110 lbs. You'l want to verify that in your copy of the manual, but so long as you meet those capacities you are able to tow.
There are two options for a trailer hitch receiver for your vehicle, the Draw-Tite # 24759 and Curt # C11132, and I highly recommend the Curt because it does not require drilling to install while the Draw-Tite...
view full answer... - Why is Towing Capacity of 2007 Chrysler PT Cruiser Lower
- The towing capacity of a vehicle is more than just horsepower and torque unfortunately. It's also based on the transmission, cooling system, brakes, and chassis strength. This is why for your 2007 Chrysler PT Cruiser there are only Class I hitches available like the Curt # C11132. Unless the trailer and car are less than 2,000 lbs this wouldn't work.
view full answer... - Trailer Tire Recommendation in Size 5.30-12 for Highway Speeds
- Radial tires are preferred for highway use actually. A radial tire flexes more than a bias tire, giving it better ground contact, traction, stability, and tread wear.
A radial tire will normally run cooler than a bias ply tire, especially when the tire is under a load. A tire that runs cooler will last longer.
That being said in the tire size of 5.30-12, I recommend the Taskmaster 5.30R12 Radial Trailer Tire w/ 12" White Spoke Wheel - 5 on 4-1/2 - Load Range C # TA78RR. The good news...
view full answer... - Recommended Trailer Hitch Receiver, Ball Mount, Bike Rack & Trailer Wiring for 2005 PT Cruiser Turbo
- For your 2005 Chrysler PT Cruiser, I recommend starting with the Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # C11132 for your custom fit. Then I recommend the Draw-Tite Drawbar for 1-1/4" Hitch - 2-1/8" Rise, 2-3/4" Drop - 6-5/8" Long - 2K # 3593 along with the 2 inch hitch ball # 19258.
For your wiring, I recommend the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C55532.
With your towing capacity it is rare that you'd need to have a...
view full answer... - Can 2002 Chrysler PT Cruiser Automatic Transmission Be Flat Towed
- Your 2002 Chrysler PT Cruiser with an automatic transmission can be flat towed if you install a lube pump kit in the transmission. We do not sell these kits but we do have everything else you'd need. The other option is a tow dolly like the part # RM-2050-1 which bypasses the need for the lube pump kit, requires less install time, and is much easier transferred to future vehicles.
But if you want to go with a tow bar setup you'd need to first start with a base plate kit. For that you'd...
view full answer... - Ball Mount and Hitch Ball Recommendation for 2006 Chrysler PT Cruiser with Curt Hitch
- With Class I hitches like the Curt part # C45014 that you have for your 2006 Chrysler PT Cruiser you have to use the recommended ball mount from the hitch manufacturer. Which in your case is the Curt # C45520 which has a 3-1/8 inch rise.
For hitch balls you'd then want the part # C40018 for a 2 inch ball and # C40001 for a 1-7/8 inch ball.
view full answer... - Recommendation For Flat Towing a 2005 PT Cruiser Behind An RV
- The items needed to tow your 2005 PT Cruiser will include base plates, a tow bar, safety cables, wiring, a braking system, and maybe a high-low hitch adapter.
For your 2005 PT Cruiser, I recommend the Roadmaster XL Base Plate Item # 278-1 because it is designed for your vehicle. It also has twistlock brackets that are virtually invisible and can be removed.
The Roadmaster Falcon All Terrain tow bar, Item # RM-522, is a great choice that fits the Roadmaster XL Base Plate. You will also...
view full answer... - Hitch, Wiring, Cargo and Bike Rack Recommendations for 2005 Chrysler PT Cruiser Convertible
- The Draw-Tite Class I hitch # 24759 that you referenced is a confirmed fit for all versions of the 2005 Chrysler PT Cruiser. This light-duty hitch can be used with a 2-bike Class I hitch bike carrier, cargo carrier or to tow up to the vehicle's limit as specified in your owner's manual.
I have included links to both bike racks and cargo carriers that are compatible with this hitch. I also linked articles that will help you select the best fit on your car and the best option for your bike...
view full answer... - Why Does Power Wire of Trailer Wiring for 2001 Chrysler PT Cruiser Have to Run to Battery
- Not all vehicles can handle the additional amperage draw of the trailer taillights on the vehicle taillight circuits. Those vehicles need setup that draws power from the battery. Some vehicles have higher rated circuits that can handle this, and others need to have the power drawn straight from the battery to protect the taillight circuits. If you ran the power wire to a power source other than the battery you'd be voiding the warranty of the harness and would be potentially putting your...
view full answer... - Parts Needed to Flat Tow 2005 Chrysler PT Cruiser
- The base plate kit part # 278-1 is a confirmed fit for your 2005 Chrysler PT Cruiser and would work well in a flat towing setup to move your vehicle across the country.
In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle. The most popular compatible tow bar is the Falcon 2, # RM-520. For safety cables you can use # RM-643. The coiled design helps keep the cables off of the ground.
For lighting...
view full answer... - Adapter Recommendation for 2006 Chrysler PT Cruiser to be Flat Towed By Duncan Towmatic II Towbar
- We offer an adapter that allows a Duncan TowMatic II to connect to Roadmaster base plates. For that you would need the part # RM-038 so that you can connect to the Roadmaster # 278-1 which is confirmed as a fit for your 2006 Chrysler PT Cruiser.
view full answer... - Difference in Curt Hitch # C11132 and Draw-Tite # 24759 for a 2005 Chrysler PT Cruiser
- Both the Curt 1-1/4 Inch Hitch, part # C11132 and the Draw-Tite 1-1/4 Inch Hitch, part # 24759 for your 2005 Chrysler PT Cruiser are very similar hitches. They both have a 200-lb tongue weight capacity. The difference in the two hitches is the Curt hitch does not require any drilling to install and the Draw-Tite requires two 1/2 inch holes to be drilled in the frame.
The Draw-Tite might take a little longer to install due to the drilling of the frame. The Curt hitch uses 4 bolts on each...
view full answer... - Adapter Recommendation to Connect Demco Towmatic II Tow Bar to Roadmaster Base Plate
- The part # RM-038 is the correct adapter you would need to connect your Towmatic II tow bar to the Roadmaster part # 278-1. You would need the entire adapter to safely make the connection so I would not recommend trying to just use a single part of the adapter. Plus the portion you referenced is not available.
view full answer... - Recommended Tow Bar and Base Plates to Tow a 2008 Chrysler PT Cruiser
- Using the tow bar and base plate system should end up being less expensive than purchasing a tow dolly, but I can say that the tow dolly set up would require less pieces to get the PT Cruiser on the road behind your RV. If you are considering the tow dolly option, we do offer one tow dolly by Roadmaster, part # RM-2000-1.
To equip your 2008 Chrysler PT Cruiser to be towed with a tow bar, you will first need to install base plate kit # 278-1. You can use receiver inserts, part # RM-200-5,...
view full answer... - Recommended Multi-Ball Hitch Ball For 2005 PT Cruiser Hitch
- For your Class I Hitch Receiver # C11132, I do have a multi-ball option for you. To go with the ball mount # 3593, I recommend the Convert-A-Ball Interchangeable Ball Set - 1-7/8", 2" Balls - 3/4" XL Shank - Nickel # 800B. This allows you to simply replace the ball with the larger or smaller diameter ball and everything else remains in place. You won't need the largest size hitch ball as your vehicle can't tow anything that would require the 2-5/16 inch ball and there isn't one available...
view full answer... - Economically Priced Trunk Mounted Bike Rack for a 2009 Chrysler PT Cruiser
- Saris does list the Solo 1 part # SA102 as a fit for your 2009 Chrysler PT Cruiser, but I would not recommend that rack. Instead the Saris Guardaian part # SAR93FR is a similar priced rack that would fit better. .
If you plan on carrying any women's or alternative framed bikes without horizontal top tubes you may also be interested in purchasing a Kuat Bike Frame Adapter Bar # UB01 to provide a horizontal top tube on your bikes to provide an attachment point. I attached a review video...
view full answer... - Snow Tire Chains for a Chrysler PT Cruiser
- I've linked our selection of chains to fit your 205/55 R16 sized tires. I recommend the Titan Chain, part # TC1540. I personally like the install on these compared to other chains. They're also good quality without breaking the bank.
You should check your vehicle owners manual for snow chain recommendations. Some vehicles require Class S (15mm or Less) tire chains, and some vehicle do not recommend the use of tire chains because of lack of clearance when turning.
I have posted a link...
view full answer...
Go To Results