Expert Answers about Lexus

• How to Connect Vehicle With 4-Way to Boat Trailer With 5-Way
• You can easily convert the 4-way on your 2001 Lexus LX470 to a 5-way to attach to connect to your boat trailer. The only thing you need is the Tow Ready 4 Pole to 5 Pole Trailer Wiring Adapter # 20036. The only thing you'll need to do is tap into a reverse light wire on your 2001 Lexus, and this adapter comes with a quick splice which allows you to easily do that. I have added a link to a video review for you to check out as well of the Tow Ready 4 Pole to 5 Pole Trailer Wiring Adapter...
  view full answer...


• What Size Dowel Nuts Do I Need for My Vehicle?
• We do have plenty of replacement dowel nuts like the Replacement M6 x 16 mm Dowel Nut for Rhino-Rack Accessories # RR56TB which are M6 x 16 mm threaded that could work for you, however in order to determine which dowel nuts you need I am going to need to know what size you need. If you can get that information back to us, we'd love to help you out.
  view full answer...


• Wiring Adapter to Install Redarc Tow Pro Elite Brake Controller in 2017 Lexus GX460
• To install the Redarc # RED44FR Tow Pro Elite in your 2016 Lexus GX460, you'd need the # 3040-P brake controller wiring pigtail and # 331-TPH-017. The # 3040-P plugs into the factory brake controller port, and then the # 331-TPH-017 plugs in-between that harness and the controller. You are absolutely correct, the factory brake controller connector is located right next to the e-brake. For those that don't care to have the typical brake controller box installed on the underside of the...
  view full answer...


• 2020 Lexus GX 460 Brake Controller and Wiring Recommendations
• You need to use a brake controller designed for your 2020 Lexus GX 460 as if it didn't have the factory tow package because the factory tow package options plug into pre-existing wiring. For a brake controller setup on your GX 460 I recommend the following: - ZCI Circuit Protected Vehicle Wiring Harness # 119250KIT - Universal Wiring Kit # ETBC7 - No-Drill Mount Bracket # 18136 - Redarc Tow-Pro Liberty Brake Controller # RED24FR - Universal Wiring Pigtail # RED69FR If you already...
  view full answer...


• What Replacement Hub Fits with a L68149 Inner Bearing and a LM67048 Outer Bearing?
• I have a hub solution for you. Even though we do carry a hub that is compatible with you current 4.4k axle that uses an inner bearing # L68149 and an outer bearing # LM67048, we do only carry one that has the brake drums. That is the Trailer Hub and Drum Assembly - 4,400-lb E-Z Lube Axles - 10" Diameter - 6 on 5-1/2 # 8-407-5UC3-EZ.
  view full answer...


• Do You Carry a Mirror with a Blind Spot Monitor for a 2014 Lexus LS 460?
• I have an answer for you. Since mirrors we carry are manufactured specifically for certain years/makes/models of vehicles, the only driver's side mirror we carry for your 2014 Lexus LS 460 is the K-Source Replacement Side Mirror # KS70716T. Even though the K-Source mirror does not include blind spot monitors, it does include heated glass, turn signal indicators, power folding, and a puddle lamp.
  view full answer...


• No Drill Mounting Bracket For Mounting 4 Way Connector to Hitch Receiver Tube
• The Curt # C13272 does not have a plate that will allow you to mount the Mounting Bracket 4-Pole Flat # 18144, but you can use the included self tapping screws in the # 18144 kit to mount the bracket on your bumper. If you wanted to avoid putting holes on the underside of your bumper, you'll want to use the # 18136 (short bracket) or # 18140 (long bracket). Either of these 2 brackets will attach to your hitch receiver tube and then allow you to attach the # 18144 for a completely drill...
  view full answer...


• Draw-Tite Hitch Receiver and Curt Wiring Harness for a 2022 Lexus RX 350
• We do offer a hitch receiver that will fit your 2022 Lexus RX 350. It is the Curt Trailer Hitch Receiver - Class III - 2" # C73DR. It is custom fit and will attach to your Lexus with included hardware that requires no drilling. This hitch receiver can tow up to 3,500 lbs and has a maximum tongue weight of 525 lbs. The towing capacity increases to 4000 lbs if used with weight distribution. For your wiring harness I recommend the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat...
  view full answer...


• Trailer Hitch & Wiring Harness for 2015 Lexus RX 350
• We can help you with a hitch and wiring harness for your 2015 Lexus RX 350. Since only 2-inch Class III hitches are made for your RX 350 you can use a reducer sleeve # HT02 to convert the 2-inch receiver of Curt hitch # C13143 down to the 1-1/4-inch size you need for your bike rack. Having the extra capacity of the Class III hitch gives you a nice safety margin since it can handle tongue weight (TW) up to 600-lbs. A hitch installation video is linked for you. You'll also need ball mount...
  view full answer...


• Parts Needed to Tow a 5000-lbs Trailer with 2009 Lexus GX 470
• It sounds like you've already got a wiring harness installed potentially, so starting with a hitch I recommend using the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # 13445, which is a confirmed fit on your 2009 Lexus GX 470. In my experience, Curt hitches have a thicker powder coating that helps protect the hitch from scratches and dings, so it's going to be less susceptible to corrosion over the long run. If your Lexus GX 470 doesn't have a wiring harness but has the tow...
  view full answer...


• Equipment Needed to Install Brake Controller on 2003 Lexus RX300
• I'd be happy to help you with that. Beginning with the brake controller I'd recommend going with a proportional controller like the Tekonsha Primus, part # TK90160. A proportional controller can sense how quickly the tow vehicle is braking, and will send the correct amount of voltage to the trailer brakes so the vehicle and trailer stop at the same rate. Time delayed controllers will always send the same amount of voltage to the trailer brakes (according to how you've adjusted it) whether...
  view full answer...


• Does the Installation Hardware Come with the Hitch for the 2008 Lexus GX470
• Yes, the Draw-Tite Class III Trailer Hitch, item # 75155, for the 2008 Lexus GX470, comes with the installation kit mentioned in the instructions. Some items you may need to complete your towing setup are listed below. Ball Mount # C45010 Pin and Clip # PC3 Hitch Ball # 63845 or # 19260 Hitch Lock # e98882 or # e98880 Wiring # C59496
  view full answer...


• Installing a Trailer Brake Controller in a 2008 Lexus RX 350
• In order to install a brake controller in your 2008 Lexus RX 350, you will need to hardwire it in. There isn't a plug-in harness available for your vehicle. The first thing you will need is a 4-Way flat trailer connector, # 18002, unless your Lexus already has one. I have linked a video showing how it installs. After the 4-Way is installed, or if the vehicle already has a 4-Way, you will need to install a 7-Way. Use # ETBC7 which comes with the 7-Way and the wiring and accessories needed...
  view full answer...


• Hitch and Trailer Wiring Harness Recommended for 2021 Lexus RX 350
• We do offer a hitch fit for the 2021 Lexus RX350. I'd recommend the Curt Class III hitch, part # C73DR, along with the # 2753 ball mount and the # 19260 for a 1-7/8 or # 63845 for a 2 inch trailer ball. For a trailer wiring harness, use # C56217. I've linked to installation videos for the wiring harness I recommended.
  view full answer...


• Recommended Trailer Hitch For A 2006 Lexus RX 330
• Out of the three hitches that are confirmed for your 2006 Lexus RX 330 The etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2 inch # e98857 is best because it has an extra coating of rust resistant paint on it making the paint coat to last longer in the elements. The hitch is also made in the USA. The trailer hitch has a bolt-on installation with no welding required, and has a matte black powder coat finish that is over a protective base coat that offers...
  view full answer...


• Parts Needed For Using Older Hully Roller & Mako Saddle For Kayak
• The Universal MightyMounts for Yakima Roof Mounted Accessories # Y03590 will be the adapter for your Mako Saddle and Hully Roller. It applies to factory crossbars no more than 4" wide or 1-1/2" tall. As a result, it will fit the factory roof rack on your 2013 Lexus RX 350 factory crossbars. There are a total of 4 MightyMounts included. The Replacement Hardware for a Single Yakima Universal MightyMount # 8880056 has 4 screws included. And the Replacement Wrench for Yakima Universal MightyMount...
  view full answer...


• Parts Needed To Be Able To Tow a Trailer With a 2013 Lexus CT 200h
• While we do carry all the components that you will need to be able to tow a trailer with your 2013 Lexus CT 200h it is not recommended for trailer towing by Lexus. That said you are likely past any manufacturer warranties that would be voided so the decision is yours to make. You will need the Curt Trailer Hitch Receiver # C11200 to attach either the 1-7/8" # C45571 or 2" # C45572 Curt Euro Style Drawbar. You will need to match the ball size to the coupler on the trailer. You will need...
  view full answer...


• All Parts Needed for Inno Roof Rack on 2017 Lexus GX 460 With Flush Mounted Rails
• To add a roof rack to your 2017 Lexus GX 460 with flush mounted rails you need the crossbars, mounting feet and a fit kit; here is the list of the parts you'll need for a complete rack: - Inno Aero Crossbars # INXB123-130 - Inno Through Feet for Aero Crossbars # INXS350 - Custom Fit Kit # INTR152 I have added a link to a video review of the bars to check out as well.
  view full answer...


• Parts Needed to Equip 2019 Lexus RX350 for Towing Rental Trailer
• For a trailer hitch, the Curt # C13272 Class III hitch would be my recommendation. I prefer the finish Curt uses on their trailer hitches. For a trailer wiring harness, I'd go with the Curt # C56217. For a ball mount, use # C45010 and # 63845 for a trailer ball. Rental trailers will use an adjustable coupler, so it'll work fine with the 2 inch trailer ball I recommended. If the trailer is large enough to require brakes (above 1500 lbs, I believe) the trailer will have a surge coupler,...
  view full answer...


• Availability of Tow Dolly for a 2010 Lexus RX-350
• From the online research that I did, I found that the curb weight (or unloaded weight) of your 2010 Lexus RX-350 is 4,178 lbs - 4,343 lbs. The highest rated tow dolly that we have to offer is the Roadmaster Tow Dolly with Self-Steering Wheels and Electric Brakes # RM-2050-1 which is rated for 4,250 lbs. Since the weight range of your RX-350 is within the limits of the tow dolly you will be able to use it but you will want to verify the curb weight of your RX-350 just to be sure and I highly...
  view full answer...