Trailer Hitch & Wiring Harness for 2015 Lexus RX 350
Question:
Im interested in a trailer hitch for a Lexus RX 350. I want it to have a 1 and 1/4 inch receiver and tongue only needs to be 200lbs with maybe 1,500 max tow. I pull a small utility trailer and use it for my bike rack. I would also like a lighting kit with it so the SUV can connect with the trailer lights. Can I get that or do I have to get 2inch receiver then look for some type of converter.
asked by: Paul B
Expert Reply:
We can help you with a hitch and wiring harness for your 2015 Lexus RX 350.
Since only 2-inch Class III hitches are made for your RX 350 you can use a reducer sleeve # HT02 to convert the 2-inch receiver of Curt hitch # C13143 down to the 1-1/4-inch size you need for your bike rack. Having the extra capacity of the Class III hitch gives you a nice safety margin since it can handle tongue weight (TW) up to 600-lbs. A hitch installation video is linked for you.
You'll also need ball mount # C45030 and a hitch ball like 2-inch ball # 63845 for towing your trailer.
If your Lexus has the factory tow package you can use harness # 118252; installation is shown in the linked video. If you do not have the tow package then instead you can use the ZCI harness kit # 119250KIT. This unique zero-contact harness uses snap-on sensors that clip on the car's taillight wires and require no cutting into the car's wiring. It can easily be removed and re-installed in another vehicle. An install video is linked for you.
Products Referenced in This Question
T-One Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Converter
- Universal Fit
- 4 Flat
- Tekonsha
more information >
2" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 7,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 7500 lbs GTW
- Class III
- Tow Ready
more information >
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 600 lbs TW
- 4000 lbs GTW
- 5000 lbs WD GTW
- 2 Inch Hitch
- 600 lbs WD TW
- Concealed Cross Tube
- CURT
more information >
Curt Ball Mount for 2" Hitches - 1" Rise, 2-1/4" Drop - 7-5/8" Long - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Rise - 1 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- CURT
more information >
Product Page this Question was Asked From
Hitch Reducer 2" to 1-1/4" Trailer Hitch Receiver
- Hitch Adapters
- Hitch Reducer
- Bike Racks
- Cargo Carriers
- Hitch Mounted Accessories
- No Extension
- Fits 2 Inch Hitch
- 2 Inch to 1-1/4 Inch
- Brophy
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: How to Use Thule T2 Pro XTR for 1-1/4 inch Hitch in 2 inch Hitch
- Q&A: Adapter Needed to Convert Thule T2 Bike Rack to 2 inch Hitch form 1-1/4 inch Hitch
- Q&A: Recommended Reducer Adapter for 2 Inch Hitch Receiver and Thule T2 Pro XTR with 1-1/4 Inch Shank
- Article: Trailer Hitch Receiver Sizes
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: How To Use 1-1/4" Yakima Dr. Tray Bike Rack with 2" Hitch
- Q&A: How to Get a Thule T2 for 1-1/4 Inch Hitches to Fit a 2 Inch Trailer Hitch Receiver
- Q&A: Replacement Hitch Bolt Size for Thule Parkway Bike Rack
- Q&A: Recommended Lock Cores for Thule Rapid Podium Feet
- Article: My Trailer Hitch Doesn't Fit
- Article: How to Choose a Bike Rack That Will Clear a Rear Mounted Spare Tire or Bumper
- Article: Best Bike Racks for Women's Bikes
- Article: How to Choose a Bike Rack for a Jeep Wrangler
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)