Expert Answers about Volkswagen Jetta

• Can the Powered Converter Wiring Kit be Connected to a 12 Volt Power Outlet on a 2010 VW Jetta TDI
• We do not recommend using the 12 volt power outlet in the trunk area for connection of a powered circuit protected wiring harness, like the Curt Hardwire Kit, # C59236, which includes the wiring to the battery. The purpose of the power wire is to eliminate the power draw on the vehicles electrical system and sensitive circuitry. Providing power directly from the vehicle battery is the only way to eliminate the draw on the vehicle electrical system. If you use the 12 volt power outlet in...
  view full answer...


• Does Yakima SkyBox Cargo Box Fit Factory Roof Rack of 2016 Volkswagen Jetta
• Yes, the Yakima SkyBox cargo box part # Y07336 is a confirmed fit for the factory roof rack you are considering for your 2019 Volkswagen Jetta.
  view full answer...


• Is Drilling Required for Mounting the # 24594 Class I Sportframe Trailer Hitch on a Volkswagen Jetta
• The Draw-Tite Class I Sportframe Trailer Hitch, item # 24594, does not bolt up to existing holes in the Jetta frame. Four, 1/2 inch, holes need to be drilled into the inboard side of each frame rail. If you would like to provide me with the year make and model of your Jetta I would be glad to see if there is a bolt on installation available for your vehicle. From the hitch you selected, there are no hitches available, for the model years this hitch fits, that do not require drilling for...
  view full answer...


• What Settings for SportRack Semi-Custom Roof Rack # SR1010 Used to Install on 2011 Volkswagen Jetta
• I spoke to my contact at SportRack and she informed me that both the front and rear bars should be set at 19. That number will read on both sides of the bar. The front bar will sit 7 inches back from the front corner of the windshield and the cross bar spread will be 26 inches. I attached an install video for you to check out also.
  view full answer...


• Socket Size and Tools Needed to Install Curt Trailer Hitch Receiver on 2015 VW Jetta Sedan
• I have added a cut out from the instructions that shows the socket sizes needed to install the Curt Trailer Hitch Receiver # C11474 on your 2015 Volkswagen Jetta sedan. You will need 10mm, 13mm, 3/4" and 11/16" sockets for the installation. I have added a link to a video install for you to check out as well of the Curt Trailer Hitch Receiver # C11474.
  view full answer...


• Will TireMinder A1AS TPMS for RVs and Trailers Interfere with Bluetooth Backup Cameras
• The TireMinder A1AS TPMS for RVs and Trailers part # TM79FR uses Bluetooth so it does operate on a 2.4Ghz frequency as well. Therefore, there is a potential for interference. I spoke to TireMinder about this and they said to keep the monitors a few feet apart and there should be no issue but we do also carry systems which operate on a different frequency, the TireMinder i10 TPMS for RVs and Trailers part # TM56FR for example operates on a 433MHz frequency.
  view full answer...


• Can Under Body Panel be Trimmed and Reinstalled on 2016 VW Jetta when Installing Draw-Tite Hitch
• I do have a solution for you but there isn't a video or specific instructions for trimming the under body panel on your 2016 Volkswagen Jetta for Draw-Tite trailer hitch # 24926. What you can do is use the Curt instructions and video (linked for reference) as a guide to trim the panel. The Curt and Draw-Tite hitches have similar designs so while the trimming will be a little different the video and instructions are a good starting point.
  view full answer...


• Hub Setting for Yakima Fullback Trunk Mount Bike Rack on 2013 Volkswagen Jetta 4-Door
• According to the fit notes for your Yakima FullBack 2 Bike Rack - Trunk Mount # Y02634, you must use hub setting 3. I attached a video that shows the Yakima FullBack 2 Bike Rack on a 2013 VW Jetta. Also note that for your 2013 VW Jetta 4-Door the upper hooks must be changed and installed in anchor mode. See page 4 of the attached instructions for anchor installation.
  view full answer...


• Installation Instructions Link for the Tow Ready Trailer Wiring Harness for a 2009 Volkswagen Jetta
• I will be happy to provide a link to the instructions for you for the Tow Ready Wiring harness, # 118667. Installation will not be difficult if you have some experience with automotive projects. the most time-consuming part, though not necessarily difficult, is connecting the power wire on the harness to the vehicle battery. I have included a link to the instructions and a link to an FAQ on connecting the harness to the battery.
  view full answer...


• Does the EcoHitch Hitch Receiver Require a Sports Strap on a 2014 VW Sedan?
• I would be happy to help answer your questions. The sports strap isn't required on 2" hitch receivers so some hitch manufacturer's offer it as an option. The Curt Support Strap # 18050 is required on Curt 1 1/4" hitch receivers. The EcoHitch Hidden Trailer Hitch Receiver item # 306-X7311 does not need the sports strap. The EcoHitch Hidden Trailer Hitch Receiver item # 306-X7311 has a 300 lbs tongue weight and the Curt Class l Trailer Hitch Receiver item # C11474 has a 200 lbs tongue weight....
  view full answer...


• Can A 2006 Volkswagen Jetta Manual 6-Speed Be Flat Towed?
• Yes, your 2006 Volkswagen Jetta manual transmission can be flat towed. I went ahead and verified with your owner's manual, and all of the "do not's" had to do with the automatic transmission models. In light of this news, you are going to need a base plate kit, tow bars, a lighting harness, a braking system, and safety cables. You did mention the Blue Ox Base Plate Kit # BX3823, and good news it'll work great! For a set of tow bars, the Roadmster Nighthawk All Terrain, Non-Binding Tow...
  view full answer...


• Will EcoHitch Fit with Bumper on a 2016 Volkswagen Jetta SEL
• Yes, the EcoHitch Hidden Trailer Hitch Receiver # 306-X7311 will fit your 2016 Volkswagen Jetta as indicated by our fitguide. If you check out the attached photo from the installation instructions you can see that there is actually some trimming of the bumper that must be done to complete the installation. This actually gives you a pretty clean looking installation as the receiver portion sticks out from the lower part of your bumper. If you let me know what you will be using the trailer...
  view full answer...


• Does the Rhino-Rack XTray Basket and Bike Carrier Have Locking Skewers
• To lock your bikes to this roof basket you'll need to use a cable lock like the etrailer # e98891 since the Rhino-Rack XTray Pro Cargo Basket and 2 Bike Carrier - Steel - 58-1/4" x 41" - 165 lbs # RRRMCB03 does not come with the skewers. There are adapters for different size skewers but none of them fit with a locking solution.
  view full answer...


• Wiring Harness and Brake Controller for 2001 Volkswagen Jetta TDI
• For wiring your 2001 Jetta, I would recommend the Upgraded Circuit Protected Taillight Converter Hardwire Kit, part # 119178KIT. The converter would tap into the existing taillight wiring on the vehicle. The easiest spot to access the wiring would be behind the taillight assemblies. Starting behind the taillight assembly on the drivers side, you would want to ground the white wire to the vehicle chassis. Typically, there is a factory installed grounding point nearby, you can use that. You...
  view full answer...


• Is a Hitch Available for a 1998 VW Jetta TDI that Does Not Require Drilling or Trimming
• I checked with all of the hitch manufacturers that we stock and all of the hitches that are available for the 1998 Volkswagen Jetta require some sort of drilling and/or trimming. If you need a hitch for your Jetta, I would recommend the Draw-Tite trailer hitch, # 24594, because it does not require drilling into the interior of the vehicle or trimming the rear fascia, see instructions link. You will need to drill four 1/2 inch holes, two in each side of the frame. I recommend using a 1/2...
  view full answer...


• Torque Specs for Installing the Curt Class I Trailer Hitch # C11474 on a 2013 Volkswagen Jetta
• The torque specs for installing the Curt Trailer Hitch Receiver # C11474 on your 2013 Volkswagen Jetta can be found in the attached installation instructions. Sometimes the manufacturers will slightly change the hardware to help accommodate newer vehicles, so it is always best to refer to the installation instructions to make sure that you have the most current specs. If you let me know what you will be using the trailer hitch for, I can make additional recommendations for you.
  view full answer...


• Where to Get Curt Trailer Hitch for 2012 Volkswagen Jetta Installed
• The trailer hitch I recommend for a 2012 Volkswagen Jetta is the Curt Trailer Hitch Receiver part # C11474 which has a class I rating with 1-1/4" capacity that's great for towing (if applicable) or hitch mounted accessories like bike racks and cargo carriers. In regards to installation, you can have this installed locally by a professional in your area using our installer locator tool on the page which I outlined for you below.
  view full answer...


• Trailer Wiring Recommendation for a 2006 Volkswagen Jetta
• We actually carry a trailer wiring harness for your 2006 Jetta that is a very easy installation. Take a look at the Custom Fit Vehicle Wiring, # 118667. This is what is called a T-One harness because it plugs in line with the vehicle tail light wiring so you will not have to splice into the vehicle wiring. I have included a link to the installation details for you. You will be able to perform this installation at home based on the easy T-one style connectors.
  view full answer...


• Instructions for Installing Tail Light Converter Kit 119175KIT on a 2000 Volkswagen Jetta
• The # 119178KIT tail light converter is a universal application, so vehicle specific instructions are not available for your 2000 Volkswagen Jetta. But I have included a link to the instructions for you. You will need to use the included circuit tester to determine which wires behind your vehicle taillights are performing which function, and connect the wires from the converter accordingly. First, you will need to access the back side of your tail light assemblies, where the wires...
  view full answer...


• Ground Clearance on Available Trailer Hitches for a 2006 Volkswagen Jetta
• On all of the available trailer hitches for the 2006 Volkswagen Jetta, the receiver and cross tubing will be fairly low. This is because of the attachment point placement on the VW frame. By design, the hitches have to be that low. On all the models, the top of the receiver tube will be just below the rear fascia. We have several videos you can view (linked below) on the Draw-Tite, Valley, and Hidden Hitch models that show the hitches installed to give you a better idea of the kind of...
  view full answer...