The Go Power Eco Solar Charging System # 34273836 can be connected to more than 1 snowmobile battery but you would need to make sure that your batteries are connected in parallel for 12 volts so that the voltage of the batteries don't change. This solar panel kit only provides a trickle charge so you need to make sure that your batteries are completely charged prior to hooking this up via a charger/maintainer like the NOCO # 329-GENIUS10 which allows you to connect up to 4 individual batteries... view full answer...
To install the Redarc Tow Pro Elite # RED44FR in your 2020 Ram 1500 Classic all you need is the harness part # 331-TPH-020 which plugs in under the dash. The harness will be located underneath the dash and right of the steering column, taped to another harness. There will be a 4-pin connector that mates with the one on the adapter.
I attached an install video too that shows where you'll find it as well. view full answer...
I checked with Pop & Lock for you and for your 2019 Ram 1500 Classic, you do need to run the wires to the driver's side kick panel when installing the Pop & Lock Power Lock Conversion Kit for Truck Caps and Hard Tonneau Covers # PAL9772. view full answer...
I went ahead and reached out to my contact at DK2, and he said that you are correct in saying that you will have to remove the air dam on the bottom of the bumper of your 2019 Ram 1500 Classic in order to install the mounting brackets # K284314 on a DK2 snow plow like # K2STOR8422.
When it comes to removing the air dam brackets, my contact unfortunately could not confirm for sure whether the brackets need to be removed. With that being said, the best route forward is to see if you can... view full answer...
The Air Lift 1000 Heavy Duty Air Helper Springs for Coil Springs part # AL60818HD are a great option for a 2020 Ram 1500 Classic. If you want to control both air bags together then you'll just need a tee like the Air Lift Union Tee for 1/4" Air Lines part # AL21838. It will be better in the long run to install a tee if you're just using the air bags for towing. view full answer...
The K-Source tow mirrors part # KS58BV that fits your 2019 Ram 1500 Classic come with all hardware needed to install on your truck. You wouldn't need any additional brackets or hardware to install them. view full answer...
I'd be happy to help you with that.
I'd recommend a proportional controller, which can sense how quickly the tow vehicle is braking and will then send the appropriate amount of voltage to the trailer brakes so the trailer and the tow vehicle brake at the same rate for safe, reliable and predictable braking. The Tekonsha Prodigy P2 you'd looked at, part # 90885 would be a great choice. You'll also need the # 3024-P wiring harness which plugs into the connector located just above where the... view full answer...
Emissions testing is basically just a check to make sure you do not have any check engine lights on. A catback system like the MagnaFlow kit part # MF17108 would not cause any check engine lights to come on so it would not cause you to fail emissions. Where it might get interesting is the visual inspection. This dumps the exhaust right before the rear axle but but does have a muffler so it really depends on how strict the place you go to enforces any restrictions on exhaust. Best option... view full answer...
The SumoSprings Solo Custom Helper Springs item # SSR-307-47 have a 1500 lbs capacity whereas the SumoSprings Solo Custom Helper Springs item # SSR-307-40 have a 1,000 lbs capacity for lighter towing and hauling applications. Both are designed to offer a stable ride when your 2019 Ram 1500 Classic is loaded down or towing a heavy load. The SumoSprings are by far the most ride comfortable jounce style springs available. There would be minimal difference if any at all when unloaded. They... view full answer...
You sure won't, except for the tape that covers the mounting holes on the back of the rocker panels. Other than a few pieces of tape, nothing existing will need to be removed. If you use the provided link, you can see a product description video for the Westin Platinum Nerf Bars. view full answer...
The DeeZee Custom-Fit Truck Bed Mat part # DZ86917 is very good about staying in the bed of the truck with no additional help. It is a 3/8" thick mat that's quite heavy and there are no issues with it catching air and flying out.
You can certainly use some double sided tape if you want but generally it is not required. The other mats that you see including the tape are very light weight and generally do need the tape to stay in. view full answer...
The Draw-Tite Activator IV Trailer Brake Controller part # 5504 will not turn off as soon as the vehicle is turned off. The Draw-Tite Activator IV like most trailer brake controllers will go into a sleep mode after about 15 minutes of inactivity. The controller will never lose power completely but after the set time has expired the display will go blank. That said, if you open the door that would trigger the system to awake so if you want to check you simply need to peek in through the window. view full answer...
The Draw-Tite Front Mount Trailer Hitch Receiver part # 65062 which is a fit for a 2019 Ram 1500 Classic only requires that the tow hooks be loosened, not removed. They will then be re-secured with the hitch in place. view full answer...
I went ahead and reached out to my tech at DeeZee, and they said that from their available diagrams, the DeeZee Brite-Tread Wrap Side Bed Caps # DZ31967 do widen slightly toward the center to about 1/4 of an inch wider. However, with that being said, they did confirm that the # DZ31967 fits perfectly with your 8-foot bed on your 2019 Ram 1500 Classic. view full answer...
The Westin E-Series Bull Bar with Skid Plate - 3" Tubing # 31-5965 is confirmed to fit your 2022 Ram 1500 Classic. I went ahead and attached the installation instructions. There is trimming required for installation.
If you need a license plate relocation kit, that is part # 32-0055. view full answer...
I spoke to my contact at Redarc and they said that the Redarc The Manager30 # RED93FR can work in a trailer when not attached to the vehicle. The shore-power will go through the charge and convert to DC power to charge the batteries. The solar will do the same. The solar and shore-power can be hooked up at the same time. The Manager30 will draw from the solar panels before taking shore-power.
Your 2019 Ram 1500 Classic 6 cylinder may have issues towing your Jayco trailer. My research... view full answer...
Yes, you can use the Tekonsha Plug-In Wiring Adapter # 3024-P to simply plug-in the Prodigy P3 # 90195 for installing it on your 2019 Ram 1500 Classic. Please note that since you have the Classic version of the 2019 Ram 1500 your pickup is the same as the 2018 Ram 1500 so it doesn't make sense as to why you wouldn't be able to install an aftermarket controller on your pickup.
The installation will be the exact same as it is on the attached video of this on a 2017 Ram 1500 which I have... view full answer...
The rails on the Reese Quick-Install Custom Installation Kit w/ Base Rails for 5th Wheel Trailer Hitches Item # RP50142-58 should be placed from center to center 22" apart. view full answer...
The bolts on the Husky Center Line Weight Distribution w/ Sway Control part # HT32215 should definitely be torqued. However you do not need to torque them yourself. They will be preset from the factory. If they are stiffening up use a good lubricating spray to free up the joint. It is likely some corrosion has creeped in there causing your issue. view full answer...
I actually sold a set of the WeatherTech mud flaps like the # WT110024-120024 you've looked at. The flaps do help with splashing, as well as helping to prevent damage from gravel and other debris being kicked up while driving. My buddy Brian has had a set on his Ram 2500 for going on 2 years now, and they're still looking great and working well.
There isn't a double-sided tape mounting option available, as it's very unlikely that tape would be durable enough to provide secure adhesion... view full answer...
Go To Results