The Curt trailer hitch # C13388 fits the following versions of the 2015 Mercedes Sprinter vans:
3500 Van - 170 inch Wheelbase - with standard bumper
3500 Van - 170 inch Wheelbase - with standard bumper
2500 Van - 170 inch Wheelbase - with standard bumper
3500 Van - 144 inch Wheelbase - with standard bumper
Since you have the factory step bumper you'll have to go with the Curt # 13358 since your frame is different and requires a different hitch fit. view full answer...
To answer your last question first on the Thule Thule T2 Pro XTR # TH83JV it measures 7 inches from the center of the hitch pin hole to the closest part of the pivoting bracket. These measurements are always taken from the center of the hitch pin hole because not all hitches have the same distance from the face of the receiver to their hitch pin hole.
On this rack it measures 7 inches from the center of the pin hole to the nearest rail where the closest bike will be. When tilted down that... view full answer...
The Draw-Tite Class III Hitch, part # 75601 will fit a 2015 Mercedes-Benz Sprinter with the 144 inch wheelbase and factory step bumper unless the outside to outside dimension of the frame members is 30-3/8 inches (which is found on cab/chassis models and not passenger vans).
You can see the installation details by clicking the link I provided for you.
To complete your towing system, I'd recommend the following:
Trailer wiring harness w/ 4 pole trailer connector, part # TK22115
Ball mount,... view full answer...
If the doors on your 2014 Mercedes-Benz Sprinter with motorhome chassis are similar in style to the one in the picture that I have attached and the distance from where the upper door hook and the lower door hook will attach to your vehicle is less than 42-1/2 inches, you should have no problem mounting the CIPA Deluxe Door Mount Mirror, # 11650,
This mirror extends out approximately 17 inches so I do recommend that you measure to determine whether this will be a sufficient amount to where... view full answer...
The Kelty Backroads Car Awning with Side Walls # KE98KR you mentioned actually does not need a set of crossbars to work!
There are straps that will allow you to connect to your vehicle's wheels without a roof rack. view full answer...
We do indeed have the correct wiring adapter for your 2015 Mercedes-Benz Sprinter 2500 to go with the Tekonsha Prodigy P3 Brake Controller # 90195. It's different than the one that fits your '07 4Runner though, and the correct part number for your '15 Sprinter is the following:
- Tekonsha Custom Wiring Adapter for Trailer Brake Controllers - Dual Plug In # 3063-P view full answer...
Any suspension enhancement that you add to your 2011 Mercedes-Benz Sprinter 3500 wouldn't necessarily add height to your RV, but it would help to keep it level when under a load and would also help create a more comfortable ride.
The SumoSprings Maxim Custom Helper Springs # SSR-336-47-1 are a great option to add to your Sprinter for suspension enhancement. They have a 2,200-lb weight capacity at 50% compression (they will not raise the weight capacity of your Sprinter) and they are connected... view full answer...
I have a solution for you.
First, though, the Thule Replacement Threaded Pin for Thule Snug Tite Hitch Lock and Anti-Rattle Device, part # 853-5917, will not fit with the etrailer Cargo Carrier e98991.
Instead, you will need to use the Threaded Anti-Rattle Hitch Pin Lock for etrailer Cargo Carriers, part # e99047. This one is designed specifically for our cargo carriers. I've linked to a video review of this below. view full answer...
You will need a universal receiver like the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver # 41990-07 for your 2015 Mercedes Sprinter. We do not carry a custom fit receiver that fits your 30-3/8" wide frame. The Draw-Tite receiver can be bolted on but as it is not a custom fit you will need to drill the holes for the mounting brackets.
The Draw-Tite Receiver is also available with 16" Brackets # 41990-16 depending on the height of your frame.
The T-One Vehicle Wiring Harness... view full answer...
With the Hollywood Racks Sport Rider SE2 Platform 2 Bike Rack w/Cargo Carrier # HR1450Z-85 installed, you will be able to open the door but it will not open all the way.
To make sure you have the clearance for the bikes with your rear mounted spare tire you will need to take a quick measurement. You will need a tape measure and a straight edge like a yardstick or a dowel. Place the straight edge vertically against the back of the spare tire, letting it extend below the trailer hitch receiver... view full answer...
The Konig Premium Tire Chains # TH02230K77 are a confirmed fit on the 245/75-16 size tires on your 2014 Mercedes-Benz Sprinter. These chains are the low-profile S Class type that is required for many passenger vehicles that could have limited clearance in the wheel wells.
These chains will be far easier to use than many, since they include features like automatic tension control and a quick-release. They are suitable for on-road use only.
I reviewed the online edition of the owner's manual... view full answer...
Your 2015 Freightliner Mercedes Sprinter 3500 with the 144 inch wheelbase and factory step bumper is indeed compatible with the Curt Trailer Hitch Receiver # 13375.
The brackets and step frame do fit together, as you'll remove the factory hardware, and install the bolts that come with the # 13375 from the inside of the frame rail through the frame, step brackets, and hitch brackets. I have added a cut out of the instructions which show this.
The only exception for why it would not fit... view full answer...
Yes, the WeatherTech Front Auto Floor Mat # WT4610631 will fit your Winnebago on a 2013 Mercedes Sprinter 3500 chassis. That is based off the passenger van model, so these floor mats will fit. view full answer...
The kit I recommend installing on your 2014 Mercedes-Benz Sprinter 2500 is this one:
SumoSprings Solo Custom Helper Springs - # SSR-329-47
The other kit # SSR-330-47 you referenced does look to install the same way but it hasn't been confirmed to fit your vehicle. I believe I saw the comment you were talking about with the fitment and it looks like that was on a 2008 Dodge Ram Sprinter. Your newer Sprinter is a little different and if you look at the linked installation video of the correct... view full answer...
I have a solution for you but there are no custom fit hitches for the narrow 30 3/8 inch frame 2011 Mercedes Benz Sprinter 3500 Dually models. They weren't as widely produced and some have a service body or step bumper which obstructs where a hitch would be mounted. If your Sprinter has a step bumper you will need to remove it. Once that's done, you'd want to measure the drop needed. The drop is the vertical measurement from the underside of the vehicle frame member and the lowest point... view full answer...
The Curt Hitch # C13388 is confirmed as a fit for the 2010-2015 Mercedes Benz Sprinter 2500, 144- inch wheelbase with a standard bumper.
For a complete towing set up you may be interested in the following items:
Etrailer Ball mount kit # 989900 - includes 2 ball mounts, 1 1-7/8 inch trailer ball, 1 2-inch trailer ball, a pin and clip, and a bag.
Wiring Harness # C59496 - includes a circuit tester, quick connectors, and a fused power wire.
Check out the helpful article that I have... view full answer...
The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13388 is a confirmed fit for your 2012 Mercedes-Benz Sprinter. The reason the hitch does not fit models with 30-3/8" frame, measured outside to outside of frame is because the normal frame on the Sprinter is wider. To confirm the fit on your Sprinter, you can measure the 35-1/2 inches from the frame hole center to center where this hitch mounts. I've attached a photo to assist. view full answer...
What you see in the pictures for Curt trailer hitch # 13358 is the factory step bumper that comes on some Sprinter vans. There is probably an aftermarket version of it out there but we do not carry it. It is attached separately from the vehicle on the underside. Take a look at the picture I have included that shows the different attachment points for the hitch and the step bumper.
If you plan on installing one of these steps then you would need a hitch like # 13358 designed for models... view full answer...
We do have window covers that fit your 2012 Mercedes-Benz Sprinter though the Camco SunShield Reflective Motor Home Window Cover # CAM45164 you referenced is a universal fit, so while it will certainly work to shield your Mercedes from the sun, it is not designed specifically to fit your van. It measures 62" x 30" so if you like you can certainly take a quick measurement of your windshield to see if it matches that of the SunShield.
Otherwise there are a pair of covers that are confirmed... view full answer...
What you are referencing is TorkLift EcoHitch, and we do have that part number for your 2015 Mercedes Spinter:
- EcoHitch Hidden Front Mount Trailer Hitch Receiver # 306-X7352 view full answer...
Go To Results