Trailer Hitch Receiver For a 2015 Mercedes Sprinter With 30-3/8 Wide Frame

Question

Question:

2015 sprinter with step bumper and 30 3/8 frame width... What do you have for bolt on hitch, with keeping the bumper,? Thank you

asked by: Paul B

0

Expert Reply:

You will need a universal receiver like the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver # 41990-07 for your 2015 Mercedes Sprinter. We do not carry a custom fit receiver that fits your 30-3/8" wide frame. The Draw-Tite receiver can be bolted on but as it is not a custom fit you will need to drill the holes for the mounting brackets.

The Draw-Tite Receiver is also available with 16" Brackets # 41990-16 depending on the height of your frame.

The T-One Vehicle Wiring Harness # C56496 will give you a 4-way flat connector that will fit most small trailers, and can be used with Auxiliary Lights # C53201. The auxiliary lights are needed when using hitch mounted accessories that impair the view of your tail lights. The Universal Installation Kit for Trailer Brake Controller # ETBC7 will allow you to connect to the 4-way and pull trailers that use a 7-way connector. The 7-way is typically used on larger trailers that have electric brakes and require a Redarc Tow-Pro Liberty Brake Controller # RED52VR.

expert reply by: Bud M

0

Answer 1

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 4

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 5

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 6

Thanks for the pictures! The best hitch for your 2023 Mercedes-Benz Sprinter 2500 is the etrailer item #e82TR. This hitch is custom fit and bolts to your Mercedes with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Trailer Hitch Receiver For a 2015 Mercedes Sprinter With 30-3/8 Wide Frame

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching