With your 2013 Chevy Silverado, the 5 foot 8 inch short bed truck won't be enough even with your pin box and super glide. If you had the 6-1/2 foot bed you'd be just fine but that 5 foot 8 inch bed requires a solid hitch and a Sidewinder because there simply isn't enough travel with the slider to give you the needed clearance.
I recommend the Sidewinder Fifth Wheel King Pin with Rotating Turret by 5th Airborne, 16K # ST400-5AS16K to replace your Leland 7921 pin box. This will use a wedge... view full answer...
You can flat tow your 2011 Chevy Silverado 1500 with your tow bar. To answer your questions specifically, there are compatible base plates from Roadmaster, the the BrakeMaster will work, a pedal adjustment kit is needed, and the wiring kit you mentioned will not work because you have combined wiring and not separate. I'll go ahead and list out exactly what you'll need for your '11 Silverado 1500 with the Falcon 2 Tow Bar # RM-520.
- Roadmaster Direct-Connect Base Plate Kit # 3154-3
-... view full answer...
While we have a great ramp set you can use, the Mad-Ramps Pivoting Ramp System # MR54FR will not work with your 10' (120") wheelbase on your Advance EV golf cart. This is because the # MR54FR only accommodates wheelbases up to 88" measured from the center of the front axle to the center of the rear axle.
As a great alternative, I recommend using a ramp set like the Arched Loading Ramp # 288-07452-2. This ramp set has a maximum weight capacity of 1,500 pounds and folds for easy storage.... view full answer...
Yes, the Curt Class V hitch # C15302 is a confirmed fit on your 2005 Chevrolet Silverado 2500 with the 6-1/2-foot box as long as it has the factory bumper. This hitch bolts on using the included hardware kit and no drilling is needed to mount it.
Wiring kits for the truck are linked for you in case you also need a 4-pole like # C55384 or a 7-way like # C56070, both of which connect using a round U.S. Car type connector like what's shown in the included photo. view full answer...
There are power towing mirrors that will fit your 2004 Chevy Silverado 2500HD but the mirrors will only support the functions your truck already has.
For example, the K-Source Custom Extendable Towing Mirror # KS62076GE and # KS62075GE that fit your truck are powered and heated, but the heat function would not be added to your mirrors, they would only be powered.
You can still use these mirrors as replacements though there is also the option of the CIPA Magna Custom Extendable Towing... view full answer...
The TorkLift Custom Frame-Mounted Camper Tie-Downs # TLC4204 (front) and # TLC3212 (rear) will fit your dually 2011 Chevy Silverado 3500 Crew Cab with an 8 foot bed, cab-length running boards and a factory hitch.
I have added a photo of these tie-downs installed on a Silverado 3500 dually and attached a link to a video of the rear tie-downs being installed on a Silverado 3500 dually for you to take a look at.
These are a custom fit for your truck, are made out of powder-coated steel... view full answer...
Thank you for the photo, and though I agree that it looks very similar to the Westin Sportsman Grille Guards # 40-0185 and # 45-0180 that fit your 2000 Chevy Silverado I would be unable to confirm that based solely on a photo. There would need to be some type of identifying numbers to reference to go by.
If it is that model of Westin you can mount it to your 2000 Silverado with Replacement Hardware Kit for Westin Sportsman Grille Guard - New Style 40-0185 and 45-0180 # 40-018PK. view full answer...
Your 2008 Chevrolet Silverado 1500 Crew Cab will require the B&W Turnoverball Underbed Gooseneck Trailer Hitch # BWGNRK1057. The Hitch # BWGNRK1059 that you found is for the previous body style that was built from 1999-2007.
I recommend using the 4" Offset Ball # BWGNXA4085 as it will gain you some additional turning clearance. And the Hopkins Endurance 5th Wheel/Gooseneck 90-Degree Wiring Harness # 41157 will allow you to add a 7-way connector in your bed. This will help prevent damage... view full answer...
The red light of the Hayes Syncronizer Trailer Brake Controller part # HA81725 should only illuminate when the vehicle's brakes are depressed which activates the trailer brakes. If your not getting the red light when you depress the brake pedal it doesn't sound like the brake controller has power.
It sounds like you are using the hayes brake controller adapter wire part # HA81781-HBC, you may want to check the fuses in the Chevy to make sure all of the factory tow package fuses are present.... view full answer...
The install of the Curt front hitch part # 31302 that fits your 2003 Chevy Silverado 1500 Z71 does not require the permanent removal of the tow hooks. view full answer...
It would certainly make things easier if there was a way to find the correct bearings and seals without taking it apart, but that's really the only way. You'll need to look at the bearings themselves; wipe away the grease and you should be able to see the part number stamped directly on them. If you are unable to find them, you would need to use a digital caliper such as # PTW80157 and measure your spindle to the thousandths of an inch where the bearings ride.
As for brakes, those are... view full answer...
We have the correct replacement foot pads for your Lippert Stabilizer Jack 337199, but the ones you mentioned will not work with that stabilizer.
Instead, the correct part is the Replacement Foot Assembly for Lippert Components Power Stabilizer Jacks # LC157584. view full answer...
The Reese 5th Wheel Trailer Hitch # RP30047 referenced in your question is compatible with standard above-bed base rails. As long as you have standard rails installed on your new 2015 Chevy Silverado 2500, your existing hitch can absolutely be transferred to this truck.
If you do not already have base rails installed on the new truck, I recommend the Reese Quick-Install Custom Base Rails and Installation Kit # RP50066-58. These rails and brackets are actually custom-designed to fit your... view full answer...
The Boone Sports Fan Telescoping Pole 94999 is no longer available. Another good choice is the Telescoping Flagpole w Car-Foot Base, Mount, Bag, and American Flag - Fiberglass - 16' Tall # CAM51606. This telescoping 16' flagpole holds up to two flags and has a very durable construction, and includes tire stand and a storage bag. The fiberglass construction should solve your problem caused by condensation/salt spray. view full answer...
Yes, you can use the Curt weight distribution shank # C17122 along with your Husky weight distribution system. With few exceptions the shanks from weight distribution systems can be interchanged between brands. The hole size and spacing on the vertical portion of the shanks is standardized. view full answer...
The etrailer brand # e98849 hitch which is a confirmed fit for your 2010 Silverado.
The hitch installs using 6 bolts, two of which use nuts that are welded up into the holes closest to the rear of the frame as shown in the provided diagram. Two additional bolts are fed downward through the frame and are secured with nuts included with the hitch, and the remaining two bolts are used to attach the flange atop the receiver tube to nuts welded up into the underside of the bumper.
It's entirely... view full answer...
I reached out to my contact at Curt/Aries and he said that the oldest Silverado they have confirmed is compatible with the ActionTrac is a 2015.
For an different motorized running board that is known to be compatible with the DEF tank on your 2011 Silverado 2500HD we have the Bestop PowerBoard Motorized Running Boards with LED Lights part # B7514715 that will work if you have an Extended Cab, but not the Crew Cab. I reached out to my contact at Bestop who confirmed these will fit with... view full answer...
Yes, the Replacement Reese Sway Control Friction Pads with Screws part # 58512 will work with your Reese SC Weight Distribution System part RP66153. These are the same pads that would have came with the system from the manufacturer. view full answer...
Brake controllers are not vehicle specific, so you can use the Hopkins Agility Electric Brake Controller, # HM47294, or any other brake controller, with your 2010 Chevy Silverado. You will just need to hardwire the brake controller wiring to the truck wiring.
The wire colors could be, but not always, Red/Black, connects to the black wire on the brake controller. White, connects to white on the brake controller. Light Blue/White, connects to red on the brake controller. Dark blue, connects... view full answer...
The # 65022 you'd looked at isn't a fit for the 2020 Ford F350, I'd recommend going with the Draw-Tite # 65076 which is a fit.
The answer to your question will really depend on which mounting system you go with and where it mounts to the vehicle. As you can see from the linked installation instructions and video, the # 65076 mounts to the inside and the underside of the front frame rails, so if the kit you're interested in occupies those areas, the two won't be compatible. view full answer...
Go To Results