I went out to our warehouse and measured the "Junior" Locking Stainless Steel Flush Door Latch part # L1883 for you. The distance of the outer surface area that houses the 4 bolt holes is 1/2" on each side and the distance the latch protrudes out from the flange is 1/4" .
I called my contact at Redline Trailers and they informed me that this lock can be used on a 3/4" thick door. To open for the inside, I recommend using the Inside Knob for Locking Stainless Steel Flush Door Latch part # 4PLSP. view full answer...
On the full Size Locking Steel Flush Door Latch, # L3980, the measurement between the housing edge and the edge of the sliding latch is 1 inch. This is measured inside on the housing edge and inside edge of the sliding latch.
The outside to outside measurement between the housing and he sliding latch is 1-3/4 inches. view full answer...
The Global Link Vise Lock for Cam-Action Door Latch # 295-000024 and Fastway Universal Trailer Coupler Lock # FA86-0015-316 cannot be keyed alike. There are no options available to get both a door lock and coupler lock keyed alike, they are each going to require their own key. view full answer...
The Redline Full Size Locking Steel Flush Door Latch # L3980 does not have an inside handle.
I have attached a photo of the back of the latch and a product review video for you.
Typically, these types of door latches do not have handles on the inside. If you need a latch that has a handle on the inside you could use a latch like the Global Link RV Entry Door Latch Kit # 295-000019.
I have attached a review video of this door latch for you. view full answer...
The Deadbolt Latch with Inside Safety Release for Enclosed Trailers # PLR7011S comes with two rods. One that is 36 inches long and one that is 48 inches long. view full answer...
You can make the Global Link RV Baggage Door Slam Latch # 295-000078 work by using the Global Link Mounting Plate # 295-000017 and building up a little bit of a frame between the mounting plate and inside of the compartment door. I actually did this myself using some 1/4" thick plywood on a racing trailer generator door about a year ago. You'll just cut a piece of 1/2" plywood to 4-1/2" x 5-5/8" and cut out a hole 4-5/8" x 3-3/4" to allow the hardware to pass through. view full answer...
The Redline T-Handle Door Latch, part # L4080 can be mounted in any position you choose. You will just need to make sure the latching bar will catch, wherever the door latch is mounted.
The amount of throw on the latch is 1-1/2 inches. See the accompanying photo for the area I measured on the latch. view full answer...
I went out to the warehouse to take a look at the Lippert Components Standard Baggage Door Latch Kit # LC317649 referenced in your question. I have included an image with the dimensions labeled that you can review.
The latch measures 6-1/2 inches total in height, including the locking mechanism. For the latch base only, it is 5 inches in height. The unit measures 4-1/2 inches wide. The depth, including only the internal mounting surface, measures 1-1/2 inches. This will be the amount... view full answer...
I went out to the warehouse and measured a T-Handle Locking Stainless Steel Flush Door Latch, # L4080. The overall depth is 2-3/4 inches.
The latch on the back side is adjustable and will fit on a door that is a 1-3/8 inches thick to 1-11/16 inches thick. view full answer...
Thanks for reaching out!
The width of the mounting brackets that comes with the Cam-Action Lockable Door Latch for Fold Down Trailer Gate or Side Door # PLR3057-SS is 2-1/16" overall but only about 1-5/16" of the bracket will actually be touching the mounting surface.
Attached is a photo of the dimensions for you to check out! view full answer...
We have the Bi-Directional Screen Door Latch # 37206-11865 that fits most standard RV screen doors and can fit whether the door is a right handed or left handed setup so it would work great for you. It has mounting holes that are 3 inches apart. view full answer...
I spoke with my contact at Redline and he informed me that all of the T-Handle Locking Stainless Steel Flush Door Latch, part # L4080, share the same lock and key. So if you ordered two # L4080s you would be able to use the same key to unlock both latches.
I went out into our warehouse and pulled two # L4080s and confirmed that the same key will open both latches. view full answer...
I went and pulled a Lippert Door Latch part # LC201471 from our warehouse to get the dimension you requested and found it to be 3 inches from one mounting hole to the other. view full answer...
I reached out to my contact at JR Products and the Door Latch # 37211675 you were looking at fits doors as thick as 1-1/4", and as thin as 1/2". view full answer...
Thanks for reaching out!
The width of the mounting bracket for the Cam-Action Lockable Door Latch w/ 36" Pipe for Enclosed Trailers # 305736 is 2-1/4" while the distance from the center of the mounting hole to the inner edge of the bracket is 1/2" (see attached photo).
I've also linked some review and installation videos for you to check out! view full answer...
I have attached for you a drawing of the Lippert Components Slam Latch Baggage Door Handle part # LC227214 which I hope has the dimensions you are looking for but if not just let me know. That said, there are not any installation instructions available for this product. view full answer...
On the T-Handle Locking Stainless Steel Flush Door Latch # L4080 the rotating latch is 2-1/4 inches long and it sits about 1-1/2 inches behind the faceplate plate. IT is designed to fit in a mounting hole of 3-3/4 inches by 2-3/4 inches and a door thickness range 1-3/8 to 1-7/16 inches thick. It has a total depth of 2-3/4 inches. view full answer...
For the Cam-Action Lockable Door Latch w/ Split Bushings for Large Enclosed Trailers # PLR658-SSP the hasp has 3-3/4 inches between the mounting holes, the keeper has a distance of 4-3/4 inches between holes, and the retainer has a distance of 3-1/8 inches between holes. view full answer...
The Privacy Latch for RV Screen Door # 37220515 that you referenced does fit your door that you have that is 1-1/8 inches thick as that's a standard RV door size. view full answer...