Unfortunately no, Tom. The 5" Offset Ball for Hide-A-Goose Gooseneck Trailer Hitches # 19308 only works with Bulldog, Draw-Tite, Hidden Hitch, and Reese Hide-A-Goose gooseneck trailer hitches.
For your Curt Double-Lock, you'll want to use the Curt 4" Offset Ball for Double-Lock Gooseneck Hitch # C602.
You'll notice this one has a 4" offset, but that's because they don't offer a 5" offset version, so this is the best we can do. view full answer...
Hey Rob,
Yes, the Demco Recon Gooseneck-to-5th Wheel Trailer Hitch Adapter # DM8550045 would be able to mount to the gooseneck ball in your B&W Turnoverball hitch. You'll just need to remove the coupler pin and drop the base of the hitch down on the hitch ball and then you can replace the pin. You will also need to tighten the bolts of the front of the hitch to fully secure it to the hitch ball and prevent rattling. view full answer...
Hello Kara, we have exactly what you are looking for. Draw-Tite actually makes an offset ball specifically for the Hide-A-Goose Gooseneck 9465-91. For that you will want the following:
- 5" Offset Ball for Hide-A-Goose Gooseneck Trailer Hitches # 19308 view full answer...
Hi Andrew,
Based on what you're describing it sounds like you have the Curt Adjustable 2-Ball Mount # C45902, which is compatible with the Curt Pintle Hook with 2-5/16" Hitch Ball # C45922. This is also rated for 20,000lbs and the 2-5/16" hitch ball can be swapped out with a 1-7/8" # C48810 or 2" # C48820 hitch ball if needed. view full answer...
The B&W Companion OEM 5th Wheel Hitch # BWRVK3305 you found is only going to fit on 2011 and newer Ford Super Duty trucks which came with the OEM prep kit. It looks like your 2008 F-350 likely had a flip down style ball which the Demco Recon Gooseneck-to-5th Wheel Trailer Hitch # DM8550045 would fit. This hitch clamps onto the hitch ball and will allow you to connect to a 5th wheel trailer.
A standard 10" Lube Plate # 16721 will work for this application. view full answer...
The Stealth Hitches Hidden Trailer Hitch Receiver w/ Towing Kit # 391SUOB20T should have a snug fit as the stainless steel block the hitch is inserted into was designed to not deteriorate over time. Be sure to look at the Ball Mount # 391BMU3S as if all the paint over the part has come off this would create a slight gap and cause some of the noise. You could recoat it to remove some of the play. Also be sure to check the bolts holding the block to the receiver as this would likely be a... view full answer...
The 2-5/16" Hitch Ball w/ Base # TVBB25 is specifically designed for the Trailer Valet XL Trailer Dolly # TVXL2. We have never tested it for fit on a Power Caster PC-2 dolly nor do I see any reviews showing anyone else has. It is unlikely the ball will fit without any modification as they are separate companies. view full answer...
According to Draw-Tite, the Remov-A-Ball Gooseneck Trailer Hitch # 6300-4491 will fit your 2023 F-150 Tremor. The only model it will not fit is the Raptor. view full answer...
The 1" High-Rise Ball # C60603 will only fit on Curt Double Lock, Flip and Store Gooseneck Trailer Hitches. Since you have the factory puck system you would want to look at a kit like the B&W # BWGNXA2061. This has the taller height than a Standard Ball # RP19311 and a feature I really like in the locking handle. This way you do not have to worry about grease in the other ball lock mechanism. view full answer...
The Curt Trailer Hitch item # C92UR weighs 21 lbs. This hitch has been confirmed to fit the hatchback models of the 2024 Honda Civic.
If you are planning on towing you will also need a wiring harness item # C43VV and the Draw-Tite Drawbar item # 3593 and then for hitch balls item # 19258 for a 2 inch ball or item # 19256 for a 1-7/8 inch ball. view full answer...
Hi Wayne,
The TorkLift SuperTruss Hitch Extension for SuperHitch Trailer Hitch Receivers # TLE1536 is designed only to be used with TorkLift SuperHitch trailer hitch receivers and would not be a fit with the Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers # 325-GH-623. You would need the TorkLift SuperHitch Original Trailer Hitch Receiver # TLF1002 on your 2015 F-350 in order to use the # TLE1536. view full answer...
Hey Samuel, the Blue Ox Gooseneck-to-5th-Wheel Trailer Hitch Adapter # BLU52XR is not compatible with the overbed style folding gooseneck balls. The overbed plate would prevent the base from making full contact with the bed of the truck. Blue Ox is very specific that the base must make full contact with the bed in order to use the adapter.
An adapter that will be compatible with the overbed folding gooseneck ball is the Ranch Hitch Universal 5th-Wheel-to-Gooseneck Coupler Adapter # AM3100.... view full answer...
Hey Cameron,
I was finally able to get my hands on the Blue Ox Adjustable Ball Mount with Pintle Hook for 2-1/2" Hitch # BLU25XR and found the spacing to be 1-7/8". view full answer...
Hello Howard. I do see that you bought the Curt E16 5th Wheel Trailer Hitch # C16530-16026 which is for the 2017-2019 Nissan Titan XD OEM prep package. You are needing a gooseneck for the same Titan XD correct? If so, I recommend the B&W Ball and Safety Chain Kit # BWGNXA2061. This is made to fit directly into the Nissan Titan XD OEM prep package.
I like the B&W brand for the gooseneck ball because the release mechanism is built into the handle. This makes in very easy to operate and... view full answer...
Hey Colin, thanks for reaching out!
The Demco Recon Gooseneck-to-5th Wheel Trailer Hitch Adapter for Recessed Ball # DM8550046 (which uses the 6316 base) will work just fine with your 2018 Keystone Cougar 368MBI as long as it doesn't have a rotating pin box.
Please note the following when it comes to fitment on your flatbed truck:
- Will not work with high-rise gooseneck balls.
- The top of the gooseneck ball must be 13/16" or closer to the top of the truck bed for the hitch to install. view full answer...
Hello Jason, that is a great question. I just spoke to my contact at Gen-Y and they informed me that yes, the Gen-Y Hitch Gooseneck Trailer Hitch # GY73XR can be mounted to move the ball closer to the cab. As long as your OEM puck system has all 5 holes, and the distance from the rear two holes to the center hole is the same as the distance from the front two holes to the center hole. Basically, they said as long as it fits into the pucks, you can use it whichever way you want. view full answer...
The B&W Tow & Stow 2-Ball Mount - Compatible with GM MultiPro Tailgate # BW44FR, and other options like it, don't come with a tab for an anti-sway bar but we do have the Curt Weld-On Sway Control Tab # C45822 which you can use to modify the B&W ball mount to fit your towing application.
B&W didn't add provisions like this so you'll want to make sure to think about how you'll use the ball mount prior to welding this tab on so you get it in the right place the first time. I recommend having... view full answer...
The Stealth Hitches Hidden Rack item # 391KIATELL20 you ordered doesn't have a class rating because it is not capable of towing. It is only for accessories that fit 2" receivers like bike racks and cargo carriers. This 2" receiver has a 600 lbs tongue weight which is comparable to class III hitches.
If you want to tow with this hitch you'll need to add the Towing Kit w/ Ball Mount and Trailer Wiring for Stealth Hitches Hidden Rack Receiver - 2" Ball item # SH53GR. view full answer...
Hey Tony, thanks for writing in, and that's a really smart question. The answer is yes, the fresh water tank should be full when adjusting the 16,000 lb Equal-i-zer Weight Distribution System # EQ90-00-1600.
What you want to do is have the trailer loaded up just like it would be when travelling to ensure you get the proper adjustment and full benefits of the hitch.
As an aside, if you don't already have a hitch ball for the # EQ90-00-1600, the right one is the 2-5/16" Hitch Ball for... view full answer...
The base on the # DM8550045 is completely different from the # DM8550046 so you can't simply add on the adapter for the recessed ball. However, you can swap out the base with # DM6316 and use your existing head which will save money over replacing the entire thing. view full answer...
Go To Results