For a standard style passenger side replacement mirror for your 2005 GMC Yukon you would want the part # KS62133G for if your current mirrors have turn signals built into them or the part # KS62073G if your current mirrors are manual adjust without turn signals.
The part # KS62061G is the correct mirror to use if you need an electric adjust, heated mirror without turn signals. view full answer...
First things first I recommend double checking that your weight distribution system is adjusted correctly to allow your 2006 GMC Yukon Denali AWD to be level when towing.
If the system is adjusted correctly per the instructions included with your hitch, then I recommend adding the SumoSprings Solo Custom Helper Springs # SSR-204-40 which is confirmed to fit your vehicle and offers 1000lbs of load leveling support to get rid of the slight sagging you have.
I included a video of the # SSR-204-40... view full answer...
The best weight distribution system we have for your 2009 Trailmanor 3124KB is the Fastway e2 Weight Distribution with 2-Point Sway Control part # FA92-00-0600. This system bolts on without any drilling into the frame and it has sway control to help you keep your trailer inline. It's rated up to 600 lbs of tongue weight which will leave you plenty of room for error with the listed dry tongue weight of your trailer which is 434 lbs.
Please note, you will also need either the 2" Hitch Ball... view full answer...
From the figures you have given me, I am going to figure that when loaded, the tongue weight of your trailer will run around 1000 lbs, which will fall right in between 10 and 15 percent of the trailer weight. This weight figure will also account for any cargo in your Yukon that is loaded behind the rear axle. It is this figure I am going to use to base my recommendation. I would go with the Reese Steadi-Flex Weight Distribution, # RP66561, that you have referenced.
The main benefit of... view full answer...
When picking out a weight distribution system, the most important factor to consider is the total tongue weight of your setup. This number includes both the loaded tongue weight of your trailer (as if loaded and ready for a trip), along with any added cargo weight coming from behind the rear axle of your Yukon Denali. Ideally, this number will fall somewhere near the middle of the operating range for the system you choose.
The most accurate method for determining your trailer's loaded... view full answer...
For your 2021 GMC Yukon AT4 the correct Blue Ox base plate kit is the part # BLU54VR which does require some minor drilling. You will use the base plate as a template to drill a couple small holes on frame of vehicle.The front fascia does require some minor trimming. view full answer...
We have not had the chance to install the Derale Combination Transmission and Engine Oil Cooler # D15902 on a 2008 GMC Yukon like yours so I cant say for certain exactly how you would route the oil lines. But I am sure there is a way for you to route the lines so that they avoid pinch points and heat.
I am not sure if you will have enough line to install the cooler the way you described, but I did go out to our warehouse and measure the length of the lines and found that the thinner line... view full answer...
For a Thule Evolution 1800 the mounting hardware is actually the EasySnap hardware which does not use knobs at all. Instead you'd need the EasySnap hardware kit part # TH05820 and you'd be set. view full answer...
Actually the Inno roof rack that has been confirmed as a fit for your GMC Yukon that consists of part numbers # INXB145-2, # INXS350, and # INTR154 does come with lock cores and keys.
The lock cores of the Inno racks aren't removable either so there is no way you could get this rack with out the locks. view full answer...
In regards to raising a trailer, there will be a few options depending on the type of axle which mind you I cannot look up for any given trailer. If you have a leaf spring axle then you may be able to go with an over/under kit if applicable like part # K71-384-00 or a hanger extension kit like part # LC425750. If you have a torsion axle then we do offer specialized lift kits but they are dependent on the particular axle, I have attached a list of options below.
I will need to know the... view full answer...
The only available base plate kit we offer for a 2021 GMC Yukon is the Blue Ox Base Plate Kit part # BLU58FR. For a compatible tow bar, I recommend the Blue Ox Avail Tow Bar part # BX7420.
The only other things you'd need are lighting like the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit part # RM-15267 and a braking system like the Blue Ox Patriot Braking System part # BLU37TR. view full answer...
Number 10 screws are what is designed to attach the Hook and Keeper # PLR9-SS to the the wall/door. You'll need a total of 8 of these.
Basically you'd use a drill and you'd run the bolts down through the holes till they are tight. view full answer...
I checked with Timbren and they have the kit part # TGMRYS4 as a it for all models of the 2011 GMC Yukon including the Denali models with air suspension so this kit will work well for you. view full answer...
You are going to have to pull a hub off your trailer to determine if the hub you referenced would fit it. We have to match either spindle dimensions or bearing numbers to know if the part # AKIHUB-440-2-1K is a correct replacement.
The bearings of this hub are:
Inner bearing: L44643 (1" inner diameter)
Outer bearing: L44643 (1" inner diameter)
For a submersible LED trailer light kit the part # TLL9RK is our most popular submersible option and would work well. I attached an install video... view full answer...
The only difference from the Bumper Mounted Tire Carrier, part # TR-1, and part # TR-2, is that part # TR-2 folds down to provide access to storage areas when mounted to your RV.
If you think the folding feature would come in handy, I would recommend part # TR-2. If you think you can do without the folding feature, part TR-1 will work just fine. Part # TR-1 may also be a little quieter when mounted, as it is all one piece.
I contacted our representative at Stromberg Carlson about what... view full answer...
We have really great universal style tow mirrors that fit your 2017 GMC Yukon with the K-Source part # KS3990 but we don't have any custom fit slip on style mirrors.
The # KS3990 are very secure and provide great viewing angles behind you due to the double mirror design so they will work great for you. view full answer...
Since you are towing a camper that weighs nearly as much as your Yukon I recommend installing a weight distribution system with sway control.
To find the right system for you, you will need to know the total tongue weight of your camper when it is loaded and ready to tow added to the weight of any cargo you place behind the rear axle of your Yukon. You may find that you have an additional 200 to 250 lbs of cargo.
The system I recommend is the Fastway e2 Weight Distribution, part # FA92-00-0800.... view full answer...
In order to pick out a direct replacement for the landing gear on your trailer we would need to know the distance between the mounting brackets. Otherwise you could just have the brackets removed from your trailer by a qualified welder and then install the brackets that come with the Reese Tandem Landing Gear Set # RP500708. Either way this landing gear set would work well for you, you just might have to have the brackets of your trailer removed and then install the brackets of the Reese... view full answer...
The best brake controller solution for what you described is the Draw Tite iCommand part # 5535 as you get a ton a brake controller for the money. It's very reliable and easy to install on your 2019 GMC Yukon with the install harness part # 3016 and it's proportional which means it senses how hard you apply the vehicle brakes and applies a relative amount on the trailer brakes.
The only easier option worth mentioning is the Curt Echo Mobile part # C51180. This basically just plugs into... view full answer...
I would recommend the Reese Round Bar Weight Distribution System with Dual Cam Sway Control, part # RP66087. This system will handle tongue weights from 600 to 1200 lbs tongue weight, so it would be ideal for your needs. The included dual cam sway control system is the top-of-the-line system as it works to not only correct sway, but to prevent it from happening in the first place. view full answer...
Go To Results