I have another recommendation for you as both the Tekonsha ZCI and Prodigy RF are on an extended backorder and we are not sure when we will start seeing them come in again. First you will want to start by installing the Curt 4-Way # C59236 on your 2013 BMW X3 xDrive28i. Then you will need the 7-Way Kit # ETBC7L for connecting your camper with electric brakes. This kit allows you to connect to the 4-way but also includes wiring for a charge line which will provide power for the braking system... view full answer...
That would completely depend on what your next vehicle is. The Draw-Tite trailer hitch receiver that fits your 2017 BMW X3, part # 76226, is designed specifically for the X3 from 2011 to 2019. It may work on later model years of the X3 but that all depends on what kind of changes BMW makes to it.
Trailer hitches designed for one vehicle should never be installed onto another. Also, when moving a hitch to another vehicle new hardware should be used. You can purchase the exact replacement... view full answer...
To install a 7-Way trailer connector on your 2017 BMW X3 you will need the Tekonsha ZCI Circuit Protected Vehicle Wiring Harness # 119250KIT and the 7-Way RV Upgrade Kit # ETBC7L to connect to your factory wiring.
The Tekonsha Harness # 119250KIT uses sensors to detect when power is traveling through the wiring to the tail lights so that you do not have to splice the wiring on your X3. This will give you a 4-way flat connector.
The 4-way flat connector will plug into the 7-way on the... view full answer...
The balls on the Self-Locking, Adjustable, Aluminum Ball Mount, # DTALBM6425, cannot be changed to accommodate a 1-7/8 inch ball, however, you can pickup part # DTALBM6407 which is the same product except it comes with a 2 inch ball and a 1-7/8 ball that you are looking for.
This ball mount has the same rise and drop dimensions and fits 2 inch hitches, but keep in mind that the towing capacity of this ball mount, when using the 1-7/8 inch ball, is limited to 2,000 lbs.
I have attached... view full answer...
We can help you with a hitch, wiring and the related items needed to tow a rental trailer with your 2016 BMW X3.
I recommend the higher-capacity hitch option which comes from Draw-Tite, their hitch # 76226, since it offers a 750-lb tongue weight (TW) rating as compared to 350-lbs for the Curt # C13316. TW is downward force on the hitch from the trailer's weight; you should be able to find out from the rental company what the specific trailer's empty TW is to confirm it will be compatible.... view full answer...
Your older Thule Aeroblade crossbars are luckily compatible with the new Evo flush rail feet, so all you'll need is the # TH710601 feet and the # TH186007 fit kit. view full answer...
We do have some trailer hitch and wiring options for your 2019 BMW X3. For a hitch I recommend using the Draw-Tite Class III # 76226 as it fits all models of your X3. Then for wiring you'll need the T-One # TK77FR which tees in behind your tail lights and gives you a 4-Way for basic lighting.
To add the correct 4-Way and 7-Way connectors we will need to determine the purpose of having those sockets. We can mount the sockets to our receiver using the Easy Mount Bracket # C58000, but you... view full answer...
For a roof rack that will fit your 2013 BMW X3 with the side rails that run front to back you can use a Thule rack using the following parts:
47 inch SquareBars # TH712200 or WingBar # TH711220
Thule feet # TH710601
Fit kit # TH186007
This rack has a 165 pound capacity. But check the X3 owners manual to determine the capacity of the roof and if lower go by the lower capacity. You can then use the Stacker, # TH830. It does not have a capacity because it will be holding up a kayak placed... view full answer...
Since the # SH62VR comes with a 7-way the only thing you will need is the brake controller and the appropriate wiring harness. For the Redarc Tow-Pro Liberty Brake Controller # RED24FR you were looking at you will need the # RED69FR. There are no custom fit wiring harnesses so you will have to splice it in for installation.
I have attached some installation videos below for your reference. view full answer...
Yes, we do have what you're looking for!
For your Replacement Heavy-Duty Landing Gear Jack Leg for Ground Control 2.0 # LC241844, you can use the:
-Replacement Aluminum Gearbox for Stromberg Carlson Landing Gear # LG-179015.
If you are needing anything else, feel free to reach out and I'd be happy to help. view full answer...
We offer the ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit # 119250KIT for your 2004 BMW. The harness features a powered taillight converter that draws the 12 volts to power your lights directly from the vehicle battery, instead of through the lighting circuits. This harness connects to your existing wires without splicing into to the wires. Check out the attached videos to learn more. view full answer...
When installing The T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # TK77FR on your 2018 BMW X3 once the harness is installed and plugged into the trailer, trailer mode is activated.
The trailer wiring harness has a simple plug and play installation that plugs behind the driver and passenger side tail lights externally. The wire is constructed of 16-gauge bonded wire.
I attached an installation video link below. view full answer...
To replace the lock on your Yakima Double Down you'll want to use part # Y07202. This comes with 2 locks and keys that are keyed a like, so you'll have a 2nd key and lock in case you add another Yakima product that offers the keyed alike feature or just need to replace the lock again. view full answer...
The Tekonsha Prodigy RF Wireless Trailer Brake Controller # TK94FR can be installed in almost any vehicle. It will work with your 2008 BMW X3. We have found that the # TK94FR Prodigy RF does sometimes have problems pairing with European cars. There are ways to make this work, but a hardwire connection is always the most reliable.
I recommend using the Tekonsha Prodigy P3 Trailer Brake Controller # 90195. This brake controller will splice into your vehicle's existing wiring system and... view full answer...
Most X3 models were equipped with the roof rails, so I initially thought you might be out of luck, but after searching around I found that Yakima offers a JetStream roof rack that would work perfectly on the bare roof of your 2013 BMW X3.
To assemble the rack, you'll need the following parts:
• 50 Inch JetStream crossbars in black as # Y00425
• BaseLine Tower Feet, part # Y28TR
• Front Fit Clip # Y06123
• Rear Fit Clip # Y06127 view full answer...
When it comes to installing a trailer hitch on your 2022 BMW X3 xDrive30i, I recommend The Stealth Hitches Hidden Rack Receiver - Custom Fit - 2 inch # SH46FR.
This trailer hitch has a simple, bolt-on installation with no drilling or welding required. It has a black powder coat finish that offers a superior rust protection. The hitch has a totally hidden design that offers a clean, from-the-factory look. The hitch will not affect the ground clearance or block the trunk's foot-access sensor.... view full answer...
The Thule Roof Rack you are seeking has been discontinued for your vehicle. Instead I recommend the Thule rack which consists of parts # TH711120, # TH710601 and # TH186007 for your 2017 BMW X3 with flush mounted rails. You will need 4 lock cores like the part # TH450400 that you referenced to secure the rack to your vehicle.
Since the Thule SUP Taxi XT # TH810001 uses 4 locks cores you actually only need 8 lock cores to get everything keyed alike. This can be found with part # TH450800.
If... view full answer...
Though The Stealth Hitches Hidden Rack Receiver # SH46FR is confirmed to fit your 2019 BMW X3 this hitch is only for hitch-mounted accessories only so you will not be able to attach safety cables. You will need The Stealth Hitches Hidden Trailer Hitch Receiver w/ Towing Kit # SH62VR.
The Stealth Hitch # SH62VR have the safety chain loops that let you attach your trailer's safety chains. This hitch has a maximum gross trailer weight up to 6,000 pounds and has a maximum tongue weight up... view full answer...
I agree, Draw-Tite is one of the most popular hitches on the market today. For your 2005 BMW X3 the Draw-Tite Max-Frame Trailer Hitch, item # 75371, would be a great choice for towing a Skeeter SX170 bass boat.
To complete your towing package you will need wiring, a ball mount with pin and clip, and a properly sized hitch ball. I have provided links to the items recommended for your vehicle and some instructions that will help. For mounting the 4-Way connector at the rear of the vehicle... view full answer...
The Thule QM3 Hardware kit, part # TH04997 is the correct mounting hardware needed to attach your Frontier Cargo box to the discontinued Thule AeroBlade or the current WingBar Evo crossbars. Thule doesn't offer the component parts of the hardware kit individually, but from what it sounds like your cargo box is already complete. I'll link you to a product description video showing what's included in the # TH04997 hardware kit, so you can compare it with what you currently have so you can... view full answer...
Go To Results