The Optronics Opti-Brite LED RV Dome Light # ILL36CB you were looking at does not include a light switch, so to operate this light you will need to add one like the # 37212225.
An easier option is the # 328-001-902XPW which has a switch built in to the light.
I included a video of the # 328-001-902XPW for you to take a look at. view full answer...
To install the Flex-a-lite Dual 13-1/2" Electric Radiator Fans w/ Shroud # FLX295 on your 2003 Chevy TrailBlazer you'll need the Mounting Bracket for 2000-2004 Chevy & GMC # FLX29201. This comes with the brackets and hardware needed to fit this directly to a 28-1/4" wide radiator core like what you should have on your TrailBlazer. view full answer...
Whoever told you a transmission cooler would help reduce your transmission cooler temperatures was correct. I would strongly recommend you get the largest one that will fit in front of your radiator.
You will need to take some measurements in front of your radiator to determine which cooler will fit the best for you. This Derale Series 8000 Plate-Fin Transmission Cooler Kit, part # D13503, is 11 inches wide by 8-3/4 inches tall and is 7/8 of an inch in depth.
If you find that you can... view full answer...
For your 2003 4.2 I6 Chevy Trailblazer with 4L60 automatic transmission, I recommend the Derale Snap-In Radiator Adapter Fitting for GM # D13035 to connect to your radiator and use a hose.
For your other adapters, you will need to measure each line. We have compression fittings for most sizes. Based on other Chevy vehicles, you may need the Derale Transmission Line Compression Fitting Kit - 1/2" Line to 1/2" NPT Barb # D13033, the Derale Transmission Line Compression Fitting Kit -... view full answer...
I may have a solution for you but a hitch stabilizer like the Reese Friction Sway Control Kit # 83660 is not designed to reduce rpms and save fuel. The purpose behind the # 83660 is to reduce trailer sway caused by winds, curving roads or sudden maneuvers for improved stability and increased towing safety.
To help with fuel economy you would want something along the lines of a tuner like the Edge Gas Evolution CS2 Performance Tuner # EP85350. This tuner works with the 5.3L V8 engine Trailblazers... view full answer...
For your new Jayco trailer and Chevy Trailblazer, I recommend the Fastway E2 Round Bar Weight Distribution Kit, # FA94-00-0600. It is a little more economical, includes sway control, and it comes with the adjustable shank. You would just need a properly sized ball like # 19286 (2-5/16 inch diameter) or # A-90 (2 inch diameter).
This system has a tongue weight capacity range of 200 to 600 pounds so the 470 pounds max on the trailer will fit nicely in the middle of that range. I have included... view full answer...
If you have a factory roof rack on your Trailblazer, I would suggest using Thule SnowPack Ski and Snowboard carrier, part # TH7326. The rack uses Thules Speed Link fastening system to clamp right on your factory roof rack cross bars and it will hold up to 6 skis or 4 snowboards without any tools needed. To see a product video featuring the Thule SnowPack, click on the provided link.
If your Trailblazer does not have the factory roof rack, please respond with the model year of your vehicle... view full answer...
Sounds like you have a 2-1/2 inch hitch on your 2014 Chevy Silverado 3500 so you need a hitch lock with a wider span. The Masterlock Hitch Lock part # 1469DAT would be a great choice for you as it has a span of 3-1/4 inches. I attached a review video for you to check out as well. view full answer...
A Timbren system like the part # TDR2500D would be a great option for your 2014 Ram 2500 with coil springs as this system is designed to be used on vehicles with coil springs. view full answer...
For your 2003 Chevy TrailBlazer, we offer the Roadmaster XL Base Plates, part # 3109-1. These base plates feature a removable draw bar, which makes the base plates virtually invisible when you are not towing the vehicle. This base plate kit is compatible with your Stowmaster tow bar.
To complete your flat-towing set-up, you might need the following parts:
Safety cables, part # RM-643
Bulb and socket taillight wiring system, part # RM-155
Supplemental braking system, part # SM99251
I'd... view full answer...
The Derale Series 8000 Plate-Fin Transmission Cooler Kit w/Barb Inlets - Class IV - Efficient , item # D13504, will work on your 2002 Chevrolet TrailBlazer. Along with this cooler you will need the Derale Radiator Adapter Fittings for GM , item # D13018, if your TrailBlazer has the 6.0 Liter engine or the Derale Snap-In Radiator Adapter Fitting for GM , item # D13035, if your engine is the 4.2 or 5.3 liter.
I cannot recommend completely replacing the factory transmission cooler on your... view full answer...
The Steelers hitch cover, # HCC20176XCHMP, is designed to fit 2 inch trailer hitches. If the factory hitch on your 2008 Chevy TrailBlazer is a 2 inch then the cover will fit. To secure the cover and deter theft, I recommend the receiver lock # e98880. I have included a link to an help article on how to measure the receiver to determine the size. view full answer...
We do have weight distribution systems that will work with the surge brakes on your EZ Loader boat trailer. I have attached a link to all of the weight distribution systems we carry that are compatible with surge brakes like # 49570. The friction sway bar of the system you referenced is what is not compatible with surge brakes, so you can use a system without it for your boat and then add it for other trailers without surge brakes using # 83660.
The most important thing to consider when... view full answer...
The distance of 25-3/4 inches would be the correct distance to have between the spring hangers. You have to consider that as the the leaf spring compresses from the weight of the trailer it will flatten out and the overall length of the spring will increase so that the shackle will face the right direction. view full answer...
On the Valley Journey brake controller, the OC code indicates that the manual override lever is being applied and there is no trailer connected. If this is happening any other time, there are some things you can do to fix it. Start by fully applying the manual override and letting it snap back into place. Do this several times to clean the contacts inside the brake controller.
Next, with the trailer disconnected, check the trailer connector on the vehicle and clean out any dirt and corrosion.... view full answer...
The trailer hitch I recommend for a 2022 Chevrolet TrailBlazer is the Draw-Tite Max-Frame Trailer Hitch Receiver part # DT55GR. This is a custom fit hitch so it won't require any drilling. It installs behind the bumper so you won't have to see any sort of crosstube, just the actual receiver part and this not only looks the best but also helps ensure the best ground clearance. In regards to install, the bumper has to come off but it's not bad and you can follow along with our video step... view full answer...
I have a great hitch receiver for your 2022 Chevrolet TrailBlazer. The tongue weight gets the full capacity out of your TrailBlazer's at 350 lbs. This will give you plenty of strength and capability to haul your Saris Freedom Bike Rack item # SA4412B. I recommend the Curt Trailer Hitch item # C94UR. The clean install completely hides the cross tube and leaves only the 1-1/4" receiver visible. view full answer...
For your 2008 Chevy Trailblazer you are going to need to use a universal style towing mirror like the K Source Universal Towing part # 11953 (sold individually) or the Clip-On Mirror we offer from K-Source, part # KS3891 that I like better, as I believe its ratcheting straps make for a more secure connection.
You can see a product demonstration video of both these mirrors by clicking the provided link.
The Original Custom Towing Mirror Slide-On Mirrors # CTM1600 that you referenced are... view full answer...
A lot depends on the wheel bolt pattern of your spare tire and the frame size of the trailer. I have included a link to an FAQ article on measuring for bolt pattern for you. If you have a frame that is up to 3 inches wide by 4 inches high, AND you have a 4 on 4 or 5 on 4-1/2 bolt pattern with 10 inch or larger wheels, go with the Fulton carrier, # FSTC1000301.
For 5, 6, and 8 lug wheels (except 5 on 5 bolt pattern) and wheels up to 16-1/2 inches in diameter with a trailer frame up to 3... view full answer...
We actually have a video of the Tekonsha P2, # 90885, being installed on a 2006 Chevy TrailBlazer that has the same wire colors as your 2008. They have found that the dark blue wire will connect to the brake controller blue wire for output to the 7-Way trailer connector.
The orange wire should be the 12 volt power from the battery. You can use a circuit tester like # 40376 to be sure. It connects to the brake controller black wire. It provides power for the controller.
The light blue... view full answer...
Go To Results