For mounting a 15" wheel on the CE Smith Trailer Idler Hub Assembly # CE13515 you will want to torque the wheel nuts to either 90-120ft-lbs on a steel wheel or 90-100ft-lbs on an aluminum wheel. I have included our a wheel torque chart below as well. view full answer...
The Air Lift Ride Control Air Helper Springs # AL59564 that you referenced are designed for load support when you are carrying heavy cargo in the bed of your 2015 Toyota Tacoma so that you can level it.
It's not really designed to be used as a lift kit, but if you were to inflate the bags to a high enough pressure you should see it raise the rear of your truck a couple inches. The ride quality will be pretty harsh at this point though. A lift kit for the rear of your truck might be a better... view full answer...
I reached out to Thule and the Rubber Wear Strip for TracRac Crossbars # TARX-12007-1 will stick up approximately 1/8" once installed on the crossbar on the # TH27000XTB. view full answer...
The Buyers Products Utility Storage Box part # 3371712240 does not come with any sort of divider so you would be able to use the full internal storage space without issue. I have attached a review video for that shows the inside of the box which you can see no divider is present. view full answer...
The SumoSprings Solo Custom Helper Springs # SSR-612-40 is 4" tall and 3" wide when uncompressed.
These are designed to be held in place under the U-bolts of a spring over axle and will likely not attach to your 2020 Toyota Tacoma with a spring under axle. I do not see that they have kit for your Tacoma with a spring under axle. If you can send me photos with measurements of your axle to frame I can check with SuperSprings to see if they have a different kit that may work with your Tacoma. view full answer...
I went out to the warehouse and pulled CE Smith Post-Style Guide-Ons # CE27620 to measure the mounting bracket for you. Overall it is 4-1/8 inches long and 3-7/8 inches wide. The internal width is just a hair over 1-5/8 inches. view full answer...
The Front Mounted Trailer Hitch Universal Spare Tire Carrier # 6715 you were looking at does not use standard lug nuts, and needs to use the included washers, and nuts.
The bolts included with the hitch are 7/16-14 grade 5 bolts, so your M12-1.5 lug nuts will not fit.
I included a video of the # 6715 for you to take a look at. view full answer...
The TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLT2303 weighs approximately 17lbs and the TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear # TLT3303 weighs approximately 19lbs. view full answer...
According to Yakima, the maximum distance between the towers for the Yakima OverHaul HD Truck Bed Ladder Rack for Toyota/Nissan Utility Tracks # Y01151-5868 will depend on the bed size of your 2014 Toyota Tacoma Double Cab with the Deck Rail System.
You can position them as far back as you like, to the end of the bed. The maximum distance for the towers on the short bed is 36-3/4 inches, and the maximum distance on the long bed is 53-1/2 inches.
I have added a link below to a video review... view full answer...
A trailer with a dry hitch weight (also called empty tongue weight) of 660-lbs will have a substantially higher TW once you load it. The Winnie Minnie 2455BHS has a gross vehicle weight rating (GVWR) of 7000-lbs which means that when loaded to capacity the actual TW of the trailer could range from 850-lbs to 1000-lbs. The trailer has a 43-gallon fresh water tank; just that 43 gallons of water weighs a hefty 358-lbs!
If your Tacoma hitch is rated for use with a weight distribution (WD)... view full answer...
The The OverHaul HD # Y01151-5868 by itself has a 500lb capacity on-road, 300lb capacity off-road, and 800lb static capacity. When using the Tonneau Cover Adapter Kit # Y01155 that changes to a 300lb capacity on-road, 180lb capacity off-road, and the static capacity remains at 800lbs.
Since you're figuring that you'll be over 800lbs you'll have to kick someone out of the rooftop tent and use another option like a rear seat mattress # 341033 or truck bed mattress # 341005 (5' bed) # 341003... view full answer...
Yes, it does. The Hellwig EZ-550 Helper Springs item # HE72FR installs directly above your 2018 Toyota Tacoma's leaf springs. You will not need to modify anything. view full answer...
I had the folks in our warehouse take measurements of the Kodiak Hub # KH84545S. The distance From the back of the hub to the wheel mounting surface is 2-5/16". I made a drawing which I have included below. view full answer...
The Erickson Big Bed Load Extender # EM07600-07601 extends out 4 feet from the trailer hitch when used as a bed extender. So if the bed of your 2007 Toyota Tacoma is 5 feet and the extender extends out past the hitch 4 feet that will be at least 9 feet of length. That is more than enough to support the kayak! view full answer...
The tracks of the Rhino Rack Roof Rack System part # Y02-500B are 1-1/2 inches wide by 1/2 inches tall. The length of the tracks is 63 inches. The feet height for this is 3 inches which is the distance from the top of the tracks to the bottom of the crossbars.
The feet of the rack can slide in and out a bit to allow for narrower track mounting if needed. view full answer...
The T-slot channel dimensions for the Yakima HD Crossbars # Y01158 are 11mm (7/16") wide on top, 8mm(5/16") deep, and 22mm(14/16") wide at it's bottom. I attached a picture of the HD crossbar's diagram as well as a video with our review on the crossbars! view full answer...
I spoke with my contact at Rola who said that the Rola Haul-Your-Might T3 Truck Bed Ladder Rack # 59799 hasn't necessarily been tested for weight that is leaned up against it. At the most he did not recommend any more than 200 lbs.
The crossbars are standard aero bars so a J-style carrier like the Thule Hull-A-Port # TH834 would fit just fine without any additional brackets. The Hull-A-Port is for one kayak. For both of your kayaks you need 2 of them.
Attached are review videos and installation... view full answer...
The SolidStep Manual Fold-Down Steps for 24" Wide RV Door Frames - Double - Aluminum # LC713662 is roughly 22" wide when measured from the outside of each step frame, so you will be able to make this fit inside your 23-1/2" wide door frame. I've linked a photo diagram of this measurement. view full answer...