What Size Nut Is Used To Secure Spare Tire To Draw-Tite Front Mount Spare Tire Carrier 6715?

Question

Question:

The hardware that comes w/ this spare tire carrier, what kind of lug nut does it accept? Will an M12-1.50 work?

asked by: Joseph A

0

Expert Reply:

The Front Mounted Trailer Hitch Universal Spare Tire Carrier # 6715 you were looking at does not use standard lug nuts, and needs to use the included washers, and nuts.

The bolts included with the hitch are 7/16-14 grade 5 bolts, so your M12-1.5 lug nuts will not fit.

I included a video of the # 6715 for you to take a look at.

expert reply by: Samuel C

0

Answer 1

I do have a solution for you however the Stromberg Carlson Folding Bumper Mounted Tire Carrier #TR-2 will not work with dually wheels. In order to mount your 75 pound Class C tire, I recommend looking into a hitch-mounted carrier like the Curt…

view full answer...

Answer 2

The Draw Tite Front Hitch part #65053 that you referenced is confirmed to fit your 2014 Motorhome built on a E-350 chassis. For a spare tire carrier you have two options. The Trailer Hitch Universal Spare Tire Carrier #6715 and the Curt Trailer Hitch…

view full answer...

Answer 3

We don't carry a bumper mounted spare tire carrier capable of the weight of a Class C Motorhome spare tire, however, we do have a hitch mounted option. The Roadmaster Hitch Mounted Spare Tire Carrier w/ 2" Receiver Opening #RM-195225 is an…

view full answer...

Answer 4

When trying to choose the right NOCO Boost Jump Starter to use for both your trucks, the easiest route is to go by the actual engine size. For example the NOCO #329-GB70 is good for up to 8.0L gas engines and 6.0L diesel engines, while the…

view full answer...

Answer 5

Yes, the Curt Trailer Hitch Mounted Spare Tire Carrier #C31006 will fit on an 8 lug wheel. I've attached a picture that a customer sent us showing just that.

view full answer...

Answer 6

We have numerous enclosed hitch mounted cargo carriers so the only question is how big do you need? Yakima EXO carrier #Y62VR is a great option because it swings away from the carrier to give you access to the back of your 2018 Audi Q7. It looks…

view full answer...

Answer 7

The Roadmaster Spare Tire Carrier part #RM-195125 isn't year, make, and model specific. It's designed for any vehicle with a 2" trailer hitch receiver with a bumper clearance of at least 6-3/4". In regards to spare tire compatibly,…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 12

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

What Size Nut Is Used To Secure Spare Tire To Draw-Tite Front Mount Spare Tire Carrier 6715?

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching