The anchor plates that come with the Replacement Hardware Bag for Yakima LandingPad 1 part # Y8890028 are 3/4" x 7/8". The thread size for the bolt is M6. view full answer...
The Curt # 13250 has a length of 13-1/2" from the center of the first bolt hole on the mounting bracket to the end of the receiver and the # 14250 has 14" with the same measurement. I've also linked photos of these with those dimensions illustrated for you to have a look at.
If there is a specific length you're seeking, just let me know and I can see if there is anything we have that will work. I've also linked an installation video of the # 13250 for you to have a look at, where it provides... view full answer...
The diameter of the tubing on the Thule Elite Van XT Bike Rack part # TH302043 is 1 inch. It has a weight capacity of 42 lbs per bike also. view full answer...
The distance between mounting hole centers on the Roller Accessory for Rhino-Rack Pioneer Platform Racks # RR43131 is 45-1/4 inches. This 50" roller is compatible with Rhino Rack Pioneer Platforms that are 56" wide, such as # RR42112BF. view full answer...
The distance between mounting hole centers on the Roller Accessory for Rhino-Rack Pioneer Platform Racks # RR43130 is 43-1/4 inches. This 48" roller is compatible with Rhino Rack Pioneer Platforms that are 54" wide, such as # RR42101BF. view full answer...
I would be happy to help you. We have those items and I was able to get the measurements for you. I have attached pictures detailing the specific dimensions you have asked for. The Curt Hitch Receiver Item # 13250 fits the 118 inch wheelbase with single rear wheels,140 inch wheelbase with single rear wheels, and 158 inch wheelbase with single rear wheels on 2005 Dodge Sprinters. The Draw-Tite Hitch Receiver item # 75210 fits 2005 Dodge Sprinters with a 140 inch wheelbase with single rear... view full answer...
I have attached a diagram I made of the Draw-Tite Max-Frame Trailer Hitch Receiver item # 75420. From bolt hole to bolt the hitch is 37-5/8". This hitch fits 2004 - 2008 Dodge Ram Pickup 1500s and 2003 - 2009 Dodge Ram Pickup 2500 and 3500s. I have linked an installation video.
I saw you were looking for a hitch for a 2008 Dodge Sprinter Van. There is a Draw-Tite that fits multiple models and wheelbases. It is item # 75549 and it fits:
2500 Van - 144 inch Wheelbase - with standard bumper
2500... view full answer...
The Draw Tite hitch part # 75549 that fits the 2007 Dodge Sprinter does not fit models that have a 30-3/8 inch wide frame like you mentioned. This measurement is the outside to outside width of the frame measuring from the two frame channels. view full answer...
There is not a 60 inch long platform rack (from Rhino-Rack or elsewhere) that is only 38 inches wide; the longest 38 inch wide option is the 48 inch long Rhino-Rack Universal Pioneer Platform Rack for Crossbars - Aluminum - 48" Long x 38" Wide # RR42114BF.
As for the capacity, there isn't a specific one; per Rhino-rack, the "Maximum permissible load is set by the vehicle manufacturer less the weight of the Platform." view full answer...
I grabbed a tape measure and went out to our warehouse to measure the Draw Tite hitch # 75210. From the center of the first hole to the edge of the receiver measured 9-3/4". From the second set of holes it is 12-1/2" to the edge of the receiver. I made a drawing for you which I have included below. view full answer...