For your 1992 Toyota Hilux, we did have a neighbor that installed the Curt Trailer Hitch Receiver # 13086 on his Toyota Hilux model. I went ahead and attached a picture of the fitment of the hitch on his truck. However, I called Curt and my contact confirmed that there is no way of telling if that hitch will fit for sure on your 1992 Toyota Hilux. Also, as you can see in the attached picture, the hitch does not have the cleanest installation.
With that being said, I recommend a universal... view full answer...
The Optronics Streamline LED Trailer Light is designed to be used with a 3 wire system, not a 4 wire. It has 3 wire leads, one for ground, one for tail light and one for a combined brake/turn signal. You can use this, you will just need a converter to bring the system down from a 4 wire to a 3 wire.
If this is for a trailer behind your 1988 Toyota pickup, you can use a trailer harness with a built in converter like part # C59496. If this is for some other sort of project you could use... view full answer...
For the matching pair of Cipa Replacement Mirrors you would want # CM17095 for the passenger side, as you noted, and # CM17195 for the driver side. These chrome mirrors are confirmed fits for your 1994 Toyota Pickup; I've added a link to a video review for you to take a look at as well. view full answer...
The Westin Fey Diamondstep Rear Bumper with Custom Installation Kit - Black Powder Coated Steel # 61000-94400 is made to be a factory-style OEM fit and will not cause any issues with the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # 13086 being installed on your 1988 Toyota Pickup. Everything necessary for installation is included, including license plate lights and wiring. view full answer...
Although the wire colors can vary by vehicle or trailer manufacturers, there is one standard way to wire a 7-way blade style trailer connector. If you are looking at the front of the connector as it is installed on the rear of a vehicle, beginning with the top pin just right of center and continuing on clockwise, first pin carries 12 volts for any trailer accessories needing power, the next pin carries the right directional/brake light signal, the next pin would carry the output from the... view full answer...
The Rampage Minivan Center Console # RA39923 is a universal application that measures 29" long x 9" wide x 14" tall. This is designed to sit on the floor but if you'd like to mount it to the floor of your vehicle you're more than welcome to find a way to secure it to your floor.
Attached is a review video for you to check out. view full answer...
Curt trailer hitch # 13086 only goes back to 1984 Toyota pickups so it is not a confirmed fit for your 1981 model.
I spoke with Curt at the width between the mounting side plates is 41-1/4 inches.
From the center of the rear most hole (on the vehicle) to the middle hole is a little over 3-3/16 inches. And from the center hole to the furthest hole is 8 inches on center.
Since Curt doesn't have the rail measurements of the truck I can only get the bolt hole spacing and width of the hitch. view full answer...
The Curt Cargo Carrier, part # C18152, has inner dimensions of 60-1/6" long x 24-7/8" wide.
The etrailer Cargo Bag, part # 988501, measures 59" long x 24" wide, so it will definitely fit with this cargo carrier.
I've linked to video reviews of both of these. view full answer...
As long as the van features a box, C-channel, or I-beam frame and its width is between 18 and 51 inches, the Curt Class III, part # C13701, can work.
However, looking at your picture, I honestly cannot say if this will work for you since I do not know what is under the panel of your 1991 Toyota Hiace Custom Van.
I recommend removing the panel and checking for one of the options above first to ensure that this is possible since the only references to hitches for your vehicle online are... view full answer...
I tried to track down the dimensions for the Westin Fey Diamondstep Rear Bumper with Custom Installation Kit # 61000-94400 that you referenced, but we do not have one in stock and Westin does not have dimensions available. However, he did assure me that this setup has been confirmed to fit your 1985 Toyota Pickup so it should work very well as a replacement bumper for you. view full answer...
To add a light kit to the Westin Fey Surestep Rear Bumper # 61001-93500 on your 1989 Toyota Pickup you need the Replacement License Plate Light Kit for Westin Bumpers # 00007153, which works with all Surestep bumpers as well as a few specific models. view full answer...
I checked with my contact at Roadmaster, and the # 1123-1 base plate kit is only a fit for the 1987 Toyota pickup models with the leaf springs because these models have a narrower frame than the models without the leaf springs.
If your 1987 Toyota Pickup does not have leaf springs, you will definitely need to use the # 1146-1 kit. view full answer...
We have a harness that can work for your 1994 Toyota Pickup.
First, the Tow Ready 17499-204 didn't have much information about it online, so I couldn't determine if it is compatible with your vehicle. The information I did find did not allude to being compatible with your truck.
When it comes to wiring your vehicle, it's best to stick with something that is built for your vehicle. That's why I recommend the Curt T-Connector, part # C55379. This is a confirmed fit for the '94 Toyota Pickup... view full answer...
Waste valves aren't really trailer year/make/model specific so the year of your trailer wouldn't be a factor. The only thing that's really important is just ensuring that you're choosing the correct size; 3" for black and 1-1/2" for gray.
As for replacing the water heater, there's no guide out there that will tell us anything in your trailer so while I do recommend switching over to the Furrion RV Tankless Water Heater # FR93FR you'll need to measure your current water heater to find the... view full answer...
The Detail K2 Rampage II Snowplow, part # K2RAMP8219, and Custom Mounting Brackets, part # K285100 are a fit for your 1983 Toyota pickup.
This residential plow measures 82-inches wide x 19-inches tall features an adjustable 3-position blade and an electric winch that raises and lowers the blade.
The mounting brackets are designed to bolt to your truck frame and no drilling is required for installation. view full answer...
The Curt # C55379 taillight converter/trailer wiring harness is a fit for your 1991 Toyota Pickup, and is compatible with both incandescent and LED trailer lamps, so it'll work perfectly for you.
I've linked to a product description video for you. view full answer...
Transmission cooler # D13502 will lower the transmission fluid temperature on your 1993 Toyota but whether or not it lowers it enough to keep the light off depends on a lot of things. Primarily it depends on the location of the cooler. If it is in front of everything, the radiator, AC condenser, and behind the grille where it can get the most air flow it is going to be the most efficient.
Hilly terrain, high ambient temperatures, and frequent starts and stops also will make the temperature... view full answer...
Engine oil coolers are not vehicle specific so you can use one on your 1993 Toyota pickup. Cooler # D15502 will fit and includes the fittings you will need. Your motor takes thread size 3/4-16 and has an o-ring diameter of 2-3/4 inches.
In most cases the factory oil filter will fit but sometimes a shorter filter is required. For your truck you could use Fram filter # PH3600 or # PH3614. I have included a link to the instructions for you to view. view full answer...
It is typically not a concern to tow a 7000 pound GVWR trailer as long as you never exceed the hitch's maximum rating of 5000 pounds or the maximum tow rating of the truck. At your specified weight of approximately 4800 pounds fully loaded, you would still be within the weight capacity for your trailer hitch. I have never heard of any laws that go by different specifications but I still recommend contacting the California State Highway Patrol. This would ensure that they don't have any... view full answer...
The 1976 Toyota Pickup with the 20R engine is a 2.2L engine. For your 1976 Toyota Pickup I recommend the MagnaFlow Stainless Steel Catalytic Converter - Direct-Fit, part # MF23889. It is a direct fit catalytic converter for your truck.
I have included a product description link. view full answer...