Will Detail K2 Snowplow And Mounting Brackets Fit 1983 Toyota 4X4 Pickup

Question

Question:

Am I correct in assuming that this plow/mounting brackets will work on a 83 Toyota 4x4 pickup?

asked by: Dennis K

1

Helpful Expert Reply:

The Detail K2 Rampage II Snowplow, part # K2RAMP8219, and Custom Mounting Brackets, part # K285100 are a fit for your 1983 Toyota pickup.

This residential plow measures 82-inches wide x 19-inches tall features an adjustable 3-position blade and an electric winch that raises and lowers the blade.

The mounting brackets are designed to bolt to your truck frame and no drilling is required for installation.

expert reply by: Jeffrey L

1

Answer 1

According to the installation instructions, the tow hooks should have been reinstalled when the Curt Front Mount Trailer Hitch Receiver, part #31198, was installed on your 2013 Toyota Tundra Unlimited. I have attached a picture from the instructions…

view full answer...

Answer 2

That is correct. There is nothing to support the bumper when you install the Curt Hitch item #C15398 on a 2013 Toyota Tundra. That hitch was designed for the trucks without the factory hitch so there's no reason for it to have built in support…

view full answer...

Answer 3

I checked with Curt and I can confirm that the Curt Front Mount Trailer Hitch item #C22NR does fit the 2022 Chevrolet Silverado 1500 LT with the diesel engine. The only picture we have is from the installation instructions and I have attached it…

view full answer...

Answer 4

Good question! The blade stiffeners that come with the Detail K2 Snowplow #K2AVAL8422 don't necessarily have to be used. I reached out to my contact at Detail K2 who said that the only time that those stiffeners really need to be used is if you…

view full answer...

Answer 5

To use a SnowBear plow with your 2021 GMC Sierra 1500 you'll need to install a front mount hitch like part #C31088 (does not fit a 2.7L Turbo) and then use one of their hitch-mount snow plows like the Personal Snowplow #SB324-080 which is…

view full answer...

Answer 6

I attached a picture that shows the install instructions for the Caster Kit for SnowBear Snowplows #SB324-126 that you referenced.

view full answer...

Answer 7

Apart from the size of the plows, another economic factor is whether the plow is electric actuator driven like the Detail K2 Rampage II Elite Snowplow - Custom Mount #K2RAMP8219ELT or electric winch driven like the Detail K2 Rampage II Snowplow…

view full answer...

Answer 8

Yes, the Draw-Tite Front Mount Trailer Hitch Receiver #DT36MR will fit your 2022 Ram 3500. This has a bolt-on installation with a 9,000 lb line pull and 500 lb vertical load limit. The only exception is if you have a diesel model.

view full answer...

Answer 9

To attach a SnowBear plow to a front hitch like the Curt #C31089 that fits your 2019 Ram 2500 what you need is the hitch adapter part #SB324-120. This will enable your current plow to attach to a hitch so you'd be set with it and the front…

view full answer...

Answer 10

I have a few different options for you, but the Draw-Tite Receiver #65041 is not going to fit a 1998 Toyota 4Runner. If you want to stick with the Draw-Tite brand, I recommend going with the Max-Frame Hitch Receiver #75091. It is a Class III hitch,…

view full answer...

Will Detail K2 Snowplow And Mounting Brackets Fit 1983 Toyota 4X4 Pickup

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching