Expert Answers about Toyota Matrix
- Correct Trailer Hitch for a 2006 Toyota Matrix XR
- The trailer hitch options for a 2006 Toyota Matrix XR are the Draw-Tite Sport Frame Receiver Hitch part # 24812 and the Curt Trailer Hitch Receiver part # C12013 which both have a 1-1/4" receiver tube opening. I recommend the Curt Trailer Hitch because of the higher class rating which will allow for more hitch mounted accessories to be used.
The Curt Trailer Hitch Receiver part # C12923 is not a good option. The Curt Trailer Hitch Receiver part # C12013 however is and will not require...
view full answer... - Hitch Recommendation for a 2008 Toyota Matrix XR That Does Not Require Removing the Rear Fascia
- You should check out the Hidden Hitch Trailer Hitch # 60965. This hitch does not require that you remove the rear fascia on the Matrix XR models for installation. I attached installation instructions for this product for you to check out.
Curt does require the use of their Support Strap # 18050 with any non-trailer loads so you will want to look at it to keep within the warranty guidelines of the hitch.
Since this hitch is a Class II hitch you will need to pick out a bike rack that is...
view full answer... - Class I Trailer Hitch Mount Bike Rack Recommendation for a 2009 Toyota Matrix
- The reason your hitch on your 2009 Toyota Matrix has a dimple is because all Class I hitches feature this dimple. And your Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4 inch, part # 24812, is a Class I hitch.
The reason your bike rack shank does not have a dimple in it is because it is a Class II hitch accessory and is designed to only be used on Class II hitches. The dimple is a safety feature that is installed onto Class I hitches to prevent Class II accessories...
view full answer... - Will Thule Pulse L Cargo Box Interfere w/Rear Hatch on 2011 Toyota Matrix with AeroBlade Roof Rack
- I checked with Thule and if you were to use the WingBar roof rack (# TH711200 or # TH711220 for the bars, # TH480R for the feet, and # THKIT1512 for the fit kit) then you can use the Pulse L cargo box, # TH615, and not have any rear hatch interference. I have included video links to the cargo box and roof rack installation on a similar vehicle for you.
view full answer... - Instructions for Blue OX Base Plate Kit # BX3750
- Yes, the instructions for the Blue Ox Base Plate Kit - Removable Arms # BX3750 will come with the base plate.
view full answer... - Recommended Rock Guard for 2006 Toyota Matrix
- What I think you are asking for is a rock guard. Depending on what base plates and tow bar you have for your 2006 Toyota Matrix, we have options. The Roadmaster Guardian Rock Guard, # RM-4000 fits all Roadmaster tow bars with quick disconnects. The Sentry Deflector for Demco Tow Bars is # DM9523135 and the Blue Ox KarGard Towed Vehicle Protector, is # BX8870.
view full answer... - Replacement Roof Rack For 2004 Toyota Matrix Which Has Obsolete Whispbar Cross Bars
- I can only recommend a replacement roof rack since Whispbar was discontinued in the fall of 2016. I recommend replacing your rack with the Yakima aero roof rack. You will need their JetStream Crossbars # Y00425 along with the Towers # Y28TR and Fit Kits # Y06139, # Y06178.
view full answer... - Difference in Class I and Class II Ball Mounts and Can They Interchange
- The correct ball mount or draw bar for the Hidden Hitch Class I 1-1/4 Inch Hitch, part # 24812, on your 2010 Toyota Matrix will be Draw-Tite Ball Mount, part # 3593.
When towing with a Class I or Class II trailer hitch, the ball mount that is recommended by the hitch manufacturer should be used. All Class I and Class II trailer hitches are tested and rated with the specific ball mount for that hitch. Using a ball mount that is not recommended by the manufacturer will void the warranty.
A...
view full answer... - Does Curt Trailer Hitch # C45014 Come with Hitch Pin
- The Curt hitch part # C45014 does not normally come with a hitch pin. I realize that seems odd since it does come with a ball mount but you'd need to provide either a hitch pin or hitch lock. For a hitch pin you'd want the part # F-4 or for a lock part # e98879.
view full answer... - Is It Ok To Use Loctite On Bolts When Installing A Receiver Hitch?
- Using Loctite when installing a hitch is not required if the receiver hitch hardware is torqued down to specifications.
However, using Loctite certainly wouldn't hurt. You could use the Loctite Threadlocker 243 # LT1330799 which would still allow you to remove the bolts with hand tools.
view full answer... - Trunk Mount Bike Rack Recommendation for 2005 Toyota Matrix
- My very favorite trunk mounted bike rack of all time is the OutWay, part # TH45JV for the 2 bike or # TH56BV for the 3 bike version. The OutWay is extremely easy to use. Instead of needing to fumble around with 6 straps and buckles like other trunk mount racks, the OutWay uses 2 rubber-coated straps that allow the bike rack to be installed or removed in seconds. The rack uses the OneKey system to secure the rack to the vehicle and the rack and the bike to the rack. The rack isn't inexpensive,...
view full answer... - How Do I Know If I Should Replace The Wiring On My Trailer?
- If the copper wire has turned black, it will mean one of two things. First, salt water somehow got through the insulation/jacket, causing it to severely oxidize. Second, it overheated and actually burned some of that jacket. In either case, I highly recommend replacing you wiring. Compromised wire like this can cause bad connections at best, and/or overheat again and possible catch fire, which would be catastrophically worse.
Depending on how you have everything wired and how many accessories...
view full answer... - What Color Is The Dahon MU-D11 You Are Selling On Your Website
- We are selling the newest model of the Dahon MU D11 Folding Bike - 11 Speed - Aluminum Frame - 20" Wheels - Gray, part # DA53FR. The pictures of this bike on our website are just stock photos. We are selling this bike in shark color.
I have included a picture of this in the product description below.
view full answer... - Which Ball Mount Goes with Curt Trailer Hitch for a 2006 Toyota Matrix
- The draw bar or ball mount recommended for Curt trailer hitch # C12013 is ball mount # C45521. For a 1-7/8 inch ball use # 19257 and for a 2 inch ball use # 19258. Then for a pin and clip use # F-4.
And for trailer wiring you can use # 118386 to add a 4-Way flat connector to the rear of your 2006 Toyota Matrix. I have linked a video review of the wiring harness for you.
view full answer... - What Rhino Rack Part Numbers are Required For Roof Rack on a 2007 Toyota Matrix
- The part # RRVA126B-2, # RRRLKVA comes with two crossbars and is part of a roof rack system confirmed as a fit for your 2007 Toyota Matrix with a naked roof.
All you would need to complete the rack is the fit kit part # DK062 and you would be ready to go.
Then for a kayak carrier to fit this rack the Thule Hull a Port part # TH834 would be a great option as well. I attached a review video for you to check out too.
view full answer... - Differences Between Curt Class II Receiver Hitch Parts #12228 and # 12221 for a 2010 Toyota Matrix
- The two Curt Class II Receivers offered for your vehicle, parts # 12221 and # 12228 have the same weight capacities and install in the same manner. Part # 12221 is constructed of round tubular steel that many find more attractive than the square tubing from which part # 12228 is constructed.
If your Matrix is the XR or XRS model, minor trimming of the lower bumper fascia might be required.
If you are planning on using the hitch for towing purposes, you will also need the T-1 Vehicle...
view full answer... - What Size Bolts are Used to Install a Trailer Hitch on a 2010 Toyota Matrix
- If you look at the instructions for Curt hitch # 12228 which I have linked for you, the bolt size used is M12-1.25 x 30mm. This is a 12mm bolt. This is the size that fits the factory weld nuts on the 2010 Toyota Matrix. Sometimes the weld nuts can get packed with grime or corrosion and it will seem like the bolts are too large to fit. We have a video and an FAQ article which I have linked for you that shows how to clean out the weld nuts to get the hardware to fit properly.
If you plan...
view full answer... - Bolt Sizes for a 2006 Toyota Matrix Trailer Hitch 24812
- All of the hitches available to fit your vehicle are Class I hitches. The most common hitch, 24812, was one which fits with or without the rear fascia. The bolts for that hitch are M12 x 1.25 x 40mm. We offer replacement hardware kits part number RHK. I have included a link to the most popular hitch for you 2006 Matrix and to our hardware kits.
view full answer... - Replacing Lock Cores on Rhino-Rack Locks
- First, you are going to need a key for the old locks. The key is needed to depress the tumblers in the locks you have. Otherwise you will not be able to get them out. What is the number on the face of the locks you have?
With the key inserted you will then need access to the back of the lock. At the back there is a metal tab holding the lock in. Use a flat blade tool or knife to press that tab down while at the same time pushing the lock out from the back.
To insert a new lock put the...
view full answer... - Is Fascia Trimming Required to Install a Trailer Hitch on a 2013 Toyota Matrix S
- We do know that on the Toyota Matrix XR and XRS versions there is fascia trimming required to install trailer hitch # 24812, but not on S models. I have included a couple of links showing installation for you to view.
If you plan on doing some towing the recommended ball mount is # 3593 and you can use hitch pin and clip # PC2. For a 1-7/8 inch ball use # 19256 and for a 2 inch ball use # 19258.
view full answer...
Go To Results