Expert Answers about Toyota Matrix
- Which Trunk Mount 2-Bike Rack Will Fit a 2004 Toyota Matrix with Roofline Spoiler
- A great choice in a trunk-mount 2-bike rack for instances like yours where the vehicle has a rear spoiler at the roof line is the Hollywood Racks Over-the-Top 2 Bike Carrier # HRF2. This rack features a unique design that is ideal for vehicles with spoilers since its support arms extend up and over the spoiler.
A 3-bike version is also available, part # HRF2-3.
I have linked at right a product review video that illustrates these carriers.
view full answer... - Will Thule Roof Track # THTP54 Fit With Thule Tracker Feet
- Yes, the Thule Tracker roof racks (no longer available) could fit in the Thule roof tracks part # THTP54.
view full answer... - Rhino-Rack Roof Rack Options for a 2009 Toyota Matrix with Naked Roof
- Yes, the Rhino-Rack clamps, # DK185, will fit a 2009 Toyota Matrix. This is only part of the roof rack though and is made to fit on a naked roof (no type of roof rack at all already on the vehicle). There are some options for the remainder of the roof rack.
You can use the Vortex bars, # RRVA126B-2 with foot pack # RRRLKVA. And finally, if you like heavy duty bars use # DH1250S. All of these systems use # DK185 on a 2009 Toyota Matrix.
view full answer... - Will the Thule OutWay Trunk Mount Bike Rack Fit a 2003 Toyota Matrix
- Yes, the ThulOutWay # TH45JV, will fit a 2003 Toyota Matrix.
If you will be carrying women's, children's, or alternative frame bikes, I recommend using the bike adapter bar, # TH982XT, to carry the bikes more level. I have included a helpful link to a video that shows how the adapter works. I have also included a link to all of the trunk mount bike racks that will fit your Matrix.
view full answer... - Can the Edge Insight Comprehensive Gauge Display be Switched to Different Vehicles
- The Edge Insight, # EP84130, will fit in any 1996 and newer vehicle that has an OBD-II port, so you can switch it to a different vehicle. Because this device is a comprehensive gauge display and does not tune the engine, additional programming, other than periodic updates to the software, are not required.
view full answer... - Base Plate Kit Fit For Roadmaster Stowmaster 5000 Toyota Matrix
- Since you have the Roadmaster StowMaster Tow Bar # RM-501 the Roadmaster EZ Base Plate Kit Removable Arms # 523156-1 is a match and fit for the tow bar. It's also compatible with Quick Disconnects and all Roadmaster tow bars. It is also confirmed to fit the 2009 Toyota Matrix.
view full answer... - Can Curt Trailer Hitch on 2007 Toyota Matrix XR Handle More Than Rated Tongue Weight
- Like you mentioned, the highest tongue weight rating for a trailer hitch on your 2007 Toyota Matrix XR is the 250 lbs of the Curt Trailer Hitch Receiver # C12221. I can't recommend going over that amount at all, even at lower speeds, as it is not rated for or tested for more than 250 lbs and exceeding that will not only put undue stress on the hitch, but also void the warranty.
So you will definitely want to stay at or below the 250 lb limit to ensure you can safely get to your destination...
view full answer... - Will Timbren Heavy-Duty Axle-Less Trailer Suspension Fit 2009 Avan Aliner Trailer
- Yes, the Timbren Heavy-Duty Axle-Less Trailer Suspension - 4" Lift Spindle - Regular Tires - 2,000 lbs # ASR2KHDS04 will fit your 2009 Avan Aliner. The system is universal and fits any frame width. This has a 2,000 lb capacity and works with 3,500 lb hub and drum assemblies like the # AKHD-545-35-EZ-K.
Keep in mind, the Timbren Axle-Less suspension system may require additional support on your trailer. If your trailer does not have a crossmember above the spot where you want to install...
view full answer... - Budget-Friendly Bike Rack for 1-1/4 Inch Trailer Hitch & 40 lb Bikes
- We actually have the perfect option for a bike rack that is compatible with your Class I hitch with a 1-1/4" receiver, has the weight capacity you need, will work with a bike that has fenders, and most importantly, is a great value.
The rack I highly recommend for you is the Hollywood Racks Trail Rider 2-Bike Rack # HR200Z.
The Trail Rider will work with bikes up to 45 lbs each, is a frame-mounted rack so fenders won't be a problem, and is less expensive than other platform racks while...
view full answer... - Cable Style Tire Chains for 2010 Toyota Matrix
- Glacier cable style chains # PW1034 will fit your 2010 Toyota Matrix if it has 205/55-16 tires. If you have 215/45-18 tires then you would use # PW1038. I included a picture of what the tire size on a tire looks like. In the picture that is a 205/75-15 tire. For either set I also recommend rubber tensioners # PW99 to keep the chains tight.
view full answer... - Does Draw Tite Hitch part # 24812 Fit a 2003 Toyota Matrix XR
- The Draw Tite Hitch part # 24812 that you referenced is a confirmed fit for your 2003 Toyota Matrix XR. The fit notes are a bit confusing, but the hitch fits the XR and non-XR models.
The center fascia of the vehicle would need to be removed to install this hitch on the XR models.
view full answer... - Will Yakima FullBack 2 Bike Carrier # Y02634 Fit on 2003 Toyota Matrix
- For your 2003 Toyota Matrix, the Yakima FullBack 2 Bike Carrier # Y02634 you referenced is a compatible fit. It conforms to your vehicle in seconds with deluxe pads on the base that protects your cars paint from scratches and abrasions so long as both the pads and car surface are very clean.
This bike carrier has an integrated, anti-sway SuperCush system with rubber straps that holds your bikes firmly in place, preventing the bikes from rocking back and forth and keeps them away from...
view full answer... - 2003 Toyota Matrix XR Trailer Hitch Receiver Options
- You have two options that will work with the 2003 Toyota Matrix XR models. Both are Class II 1-1/4 inch hitch receivers, but there are some visual and capacity differences between the two. The Draw-Tite option # 24812 will be more visible than the other and will have less capacity. The Curt option # C12013 which I recommend is less visible and has more weight capacity.
I recommend the Curt option because it's more hidden and has a maximum gross trailer weight of 2,500 lbs and a maximum...
view full answer... - Will Hitch that Fits 2005 Toyota Matrix Also Fit 2009 Matrix
- Yes hitches like the Draw Tite part # 24812 fit both a 2005 Toyota Matrix and a 2009 Matrix.
view full answer... - Is Fascia Trimming Required to Install Draw-Tite Class I Receiver on 2010 Toyota Matrix S
- According to my contacts at Draw-Tite, no fascia trimming or other modification is necessary for installing the Class I Receiver, part # 24812 on your 2010 Matrix S. On the XR and XRS models, trimming would be needed.
To see the installation details, click on the provided link.
view full answer... - Is Atlas Lift Tailgate Lift Support Meant for Rear Hatch or Back Glass
- The Tailgate Lift Support # ATL82GR will only work for the rear hatch of the 2007 Toyota Matrix. The back glass uses a different strut.
view full answer... - Will the Curt Trailer Hitch Receiver C12221 and the Swagman XC S64650 Work on a 2009 Toyota Matrix
- The Class I Trailer Hitch Receiver, part # C12221, and the Swagman XC, part # S64650, will work well on your 2009 Toyota Matrix.
The only other thing that you will want to keep in mind is that per the Curt warranty you will need to use a Support Strap # 18050 for any non-trailer loads like a bike rack or cargo carrier, otherwise the warranty is void.
If you would like to add some security to your setup, I recommend using the Anti-Rattle Hitch Lock and Cable # S64031 which will help to...
view full answer... - What Trailer Hitches Will Fit 2009 Toyota Matrix XRS Without Any Trimming Of The Rear Fascia
- On the Draw-Tite Class I Trailer Hitch, # 24812, it will fit on your 2009 Toyota Matrix XRS with the lower rear fascia. The rear fascia has a center section that will have to be removed when you install the hitch. It is not hard to remove that section because it is made to be removed for a trailer hitch installation.
Also needed for towing would be the Draw-Tite Ball Mount, # 3593, and either the Tow Ready 1-7/8 Inch Hitch Ball, # 19256, or the Tow Ready 2 Inch Hitch Ball, # 19258.
The...
view full answer... - Rhino-Rack Roof Racks for 2010 Toyota Matrix
- We can offer you choices in roof racks that are a confirmed fit for your 2010 Toyota Matrix.
Please click on the included link to see our main page for roof racks for the 2010 Matrix. Then select the type of roof you have - bare or with raised side rails that came from the factory - to then see suitable rack systems for that type of roof.
We offer four different Rhino-Rack aero-style roof racks for the Matrix with a bare roof - meaning with no existing rails or crossbars. Those racks...
view full answer... - Will the Swagman XC2 Wheel Mount Bike Rack # S64650 Fit in Class I Hitch on a 2004 Toyota Matrix XR
- The Swagman XC2 Wheel Mount Bike Rack, item # S64650, does work with Class I hitches. You can rest assured because the 2009 Ford Focus that is pictured with this rack installed is one of my good friends vehicle and it works great on his car. We installed the Class I hitch on his vehicle which is the only size avalable for the Focus at this time.
I checked the manufacturer instructions (see link) and see no mention of the rack not fitting in a Class I hitch.
If you need a hitch for your...
view full answer...
Go To Results