What Size Bolts are Used to Install a Trailer Hitch on a 2010 Toyota Matrix
Question:
what is the bolt size , 12mm 1.25,1.50,1.75? thanks
asked by: Tim T
Expert Reply:
If you look at the instructions for Curt hitch # 12228 which I have linked for you, the bolt size used is M12-1.25 x 30mm. This is a 12mm bolt. This is the size that fits the factory weld nuts on the 2010 Toyota Matrix. Sometimes the weld nuts can get packed with grime or corrosion and it will seem like the bolts are too large to fit. We have a video and an FAQ article which I have linked for you that shows how to clean out the weld nuts to get the hardware to fit properly.
If you plan on doing some towing with the hitch, it does come with the correct ball mount, hitch pin, and clip. For a 1-7/8 inch ball use # 19256 and for a 2 inch ball use # 19258. For trailer wiring, use # 118460. I have linked instructions for the wiring and videos showing typical installations of the wiring and hitch for you.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
1-7/8" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 2000 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
2" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 3500 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class II
- 250 lbs TW
- 2500 lbs GTW
- 1-1/4 Inch Hitch
- Concealed Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Hitch
- Shop: Replacement Hardware Kit for Trailer Hitches
- Article: How to Correct Noise from Exhaust Rattling Against a Trailer Hitch
- Article: Trailer Hitch Receiver Sizes
- Q&A: Which Way Do the Washers Install On the Curt Hitch C12228
- Article: Routing the Power Wire for a Trailer Wiring Harness
- Q&A: What is the Difference Between Class 1 and Class 2 Hitches for the Scion XB
- Article: How to Choose the Right Trailer Hitch Class
- Article: Best Bike Racks for Electric Bikes
- Article: My Trailer Hitch Doesn't Fit
- Article: How to Choose a Hitch-Mounted Bike Rack
- Q&A: Differences Between the Curt Hitches for the 2009 Toyota Matrix
- Q&A: Recommended Curt Trailer Hitch Receiver For 2007 Toyota Matrix XR
- Q&A: How to Clean Out Weld Nuts on a 2006 Toyota Matrix to Install a Trailer Hitch
- Q&A: Trailer Hitch and Wiring for a 2005 Toyota Matrix
- Q&A: What Size Mounting Bolts Do I Need To Mount A Trailer Hitch.
Anonymous
12/1/2012
thank-you for your help on toyota bolt size for curt hitches,will order from you folks soon. Tim T.