To order the complete hardware kit for the Draw-Tite trailer hitch receiver, part # 75234, all you need to do is order part # RHK and enter the hitches part number and select "Draw-Tite" from the drop down menu.
This will include all of the original hardware: Bolts, nuts, washers, spacers, and even the bolt leader wire thingy. view full answer...
Motorhome 50-amp male power inlets require a cord with a 50 Amp Twist Lock female plug like the one on the Mighty Cord 25-foot # A10-3050EDBK. But since the other end of this cord has a 30-amp male connector, not a 15-amp household supply male connector, you will also need a dogbone adapter # A10-1530HVP to give you the standard 120V male plug to connect to a household outlet. view full answer...
To install the Rhino Roof Rack on your 2017 Ford Edge you are going to need two separate parts. The first is the Rhino-Rack 2500 Roof Rack - Square Crossbars - Naked Roofs or Fixed Mounting Points - 54" Long item # Y01-120B-NT. These are the crossbars and legs. The second part you need is the Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs - Naked Roof item # DK432. This are the clamps that mount to both your roof and the legs to attach the entire system to your Ford. I have... view full answer...
A supplemental brake system is one of the five items you need when flat towing any vehicle. The brake system I recommend is the Stay-IN-Play DUO # SM99251. It's one of the easiest systems to use after the initial install. You just flip a switch to activate it.
If you do not have all of the equipment needed to flat-tow your Edge I will make some recommendations for you.
For base plates I recommend part # 4408-1 if your vehicle does not have EcoBoost and does not have Adaptive Cruise... view full answer...
What you are looking for is the Charge Line Kit # RM-156-25. This will allow you to keep your battery charged via the 12V power feed from your motorhome while you use the SMI Stay-IN-Play DUO # SM99251.
I am not sure what wiring you have on your Ford Edge but I typically recommend installing the Flexo-Coil Wiring Kit # RM-15267 which will activate the lighting functions on your vehicle and allow you to wire the charge line kit to the center pin.
For a complete flat towing setup you will... view full answer...
Yes, your 2008 Ford Edge can be flat-towed behind an RV. There are a number of parts you would need, starting with the base plates. I recommend using the Roadmaster XL Base Plate Kit # 4408-1 and the tow bar I suggest you pair with it is the Roadmaster Falcon 2 # RM-520. You'll need to use safety chains # RM-643 I've linked videos for you showing the base plates being installed and a review of the tow bar.
To ensure you have working brake lights and turn signals on your Edge, there are... view full answer...
I would be happy to help you set up your 2021 Ford Edge to tow your jet ski. I recommend the Curt Trailer Hitch Receiver item # C13234. The hitch receiver will sit about a 1/2 inch higher from the ground compared to the similar Draw-Tite item # 75214 that is also available for your vehicle. I have attached a picture and a installation video so you can see what the final product looks like after installation.
For your wiring harness I recommend the Tekonsha T-One Vehicle Wiring Harness... view full answer...
Per the manufacturer, you can both flat and dolly tow a two wheel drive 2008 Ford Edge. If you have the all wheel drive model, you can only use a flat towing setup. For both the two and four wheel drive models, I recommend flat towing your vehicle with four wheels down as this will be the best option for frequent uses.
For a flat towing setup you will first need a base plate kit such as the Roadmaster XL Base Plate Kit part # 4408-1. The Roadmaster base plate kit has a removable arm feature... view full answer...
A great solution for mounting a 4-pole wiring harness like Tekonsha # 118669 without having to drill into your bumper is to use a no-drill bracket like # C57202 with the 4-pole bracket # 18144. The no-drill brackets include a ring clamp that secures to your hitch tube. view full answer...
If your 2021 Ford Edge is an ST model, with the 2.7L Eco Boost engine it can be flat towed. Otherwise, it'll need to be trailered.
For base plates, I'd recommend the Blue Ox # BX2677 base plate kit along with a # BX7380 Blue Ox Alpha tow bar. The tow bar is non binding for easy unhooking and is self centering so you don't need to have the vehicle perfectly lined up behind the motorhome. Just hook up and pull away, and the tow bar will align itself automatically. Safety cables are included... view full answer...
For your 2013 Ford Edge we have 2 different options for a base plate kit.
One is the Roadmaster XL # 4408-1 and the other is from Blue Ox # BX2628. The both are compatible with the non-EcoBoost without Adaptive Cruise Control. The difference between these options is that they install slightly different and the removable draw bars have a different design.
The Roadmaster XL # 4408-1 will work great with the Roadmaster Falcon 2 Tow Bar # RM-520 and 6K Coild Safety Cables # RM-643. If you... view full answer...
We definitely have a Thule roof rack that's compatible with the glass roof on your 2018 Ford Edge. You will need the following parts:
53" WingBar Evo Crossbars - # TH711420
Evo Clamp Feet - # TH710501
Fit Kit - # TH145074
Lock Core Kit - # TH450400 (optional)
This roof rack is compatible with the Hullavator Pro# TH898 but you may need to offset the crossbars to get the overhang required for the kayak carrier. view full answer...
The ratchet straps that I recommend using with the etrailer Aluminum Cargo Basket # e98874 are the Erickson # EM01411, which are similar to the now discontinued ones used in the video you referenced. These straps will do a great job of allowing you to secure all of your cargo in the basket. view full answer...
The items required for safe and legal flat towing are outlined in the linked overview article on towing a vehicle behind a motorhome. You will also want to check that the hitch and the MH's frame both are rated adequately for the total weight of your trailer (and the Edge too, of course).
Starting with base plates, you can use the Roadmaster kit # RM-524448-4. These fit the Edge without 2.0 EcoBoost. For a car-mount tow bar you can use their StowMaster Tow Bar # RM-501.
For safety cables... view full answer...
You will need to hardwire in a connector, but it'll be super-easy. You'll just need to run one wire from the rear of the vehicle up to the positive battery terminal via a 40A circuit breaker. We have a kit set up just for this situation, the part number is # ETBC7L.
The kit includes an adapter to convert the existing 4-pin to a 7-way. The adapter will have 4 additional wires. The blue wire and purple wire won't be needed in your situation, so you can just bundle those up our of the way.... view full answer...
Thank you for your purchase of the towing products for your 2018 Ford Edge!
To upgrade your T-One Wiring Kit # 118677 so it's compatible with the Curt Echo Brake Controller # C51180 you just need the 7-Way RV Upgrade Kit # ETBC7L which plugs into the T-One and then route the power wire to your battery.
I've attached a review video for you to check out! view full answer...
Yes, per the owner's manual I looked up, so long as you have the 2.7L engine you can flat tow your 2023 Ford Edge ST. The warranty will not be affected, and Roadmaster does indeed have the parts for your vehicle. To make it easy for you to order, I'll go ahead and list them all out:
- Base Plate Kit: Roadmaster Direct-Connect Base Plate Kit # RM-524460-5
- Tow Bar: Roadmaster Falcon All Terrain, Non-Binding Tow Bar # RM-522
- Roadmaster Safety Cables # RM-645
- Wiring Kit: Roadmaster... view full answer...
On your 2019 Ford Edge you will have to add a 7-Way Circuit # ETBC7 as there are no factory provisions for a 7-way or brake controller. This kit will plug into your existing 4-way for your lighting and give you additional wiring and circuit breakers to run to the front of you 2019 Ford Edge for the brake controller and charge line circuits. We have a great video of this done on a Ford Edge linked below.
For the Prodigy P3 # 90195 you will need a Replacement Mounting Bracket # TK5906 and... view full answer...
For your 2010 Ford Edge you will want the discontinued Q102 Q Clips, and the Q Tower Feet, part # Y00124.
If you want to use your bars, then the newer style roof rack you will want consists of:
Round 48" Crossbars # Y00408
BaseLine Towers # Y28TR
RoundBar SL Adapter # Y03536
BaseClip Fit Kit # Y06180
I have attached an installation video of this roof rack to give you an idea on how it will install. view full answer...
The Rhino-Rack ROC 25 # RR38SR system will work well for your 2012 Ford Edge, but I do recommend confirming the capacity of your roof compared to the kayaks you're carrying in order to make sure that you won't be overloading it.
To carry your kayaks, you'll want to use 2 of the Rhino-Rack J-style Kayak Carriers # S510, which will attach to the vortex aero bars that come with the ROC 25 system. These carriers come with the straps included to secure your kayaks to the carriers and vehicle,... view full answer...
Go To Results