For your 2018 Honda Accord, I recommend the:
-Curt Trailer Hitch Receiver # C11525.
This rack eats away practically no ground clearance (shown in picture), while still providing a maximum tongue weight of 200-lbs, and a gross trailer weight of 2,000-lbs.
For a bike rack to haul your heavy e-bikes, I recommend the Saris SuperClamp EX Bike Rack for 2 Bikes # SA4025F. This rack has a maximum carrying capacity of 60-lbs per bike, and since your bikes are 48-lbs each, they're well under the... view full answer...
The CURT Class I Trailer Hitch, # C11205, comes with the CURT Mfg. recommended ball mount, # C45521, which uses a hitch ball with a 3/4 inch diameter shank.
For a trailer with a 1-7/8 inch coupler, you can use the CURT hitch Ball, # C40001, and for a trailer coupler that uses a 2 inch ball you can use the CURT Hitch Ball, # C40018. view full answer...
You can get hitch installation hardware with part # RHK. You'll navigate to that product page and put hitch model # C11563 in the field marked "Hitch Item Number", and that will allow us to get the correct hitch installation hardware to you. view full answer...
There are 5 major components needed to flat tow a 2008 Honda Accord. But the first step is to consult the vehicle owners manual for specific information on flat towing the Accord.
To flat tow a vehicle you will need the tow bar, base plates which attach to the vehicle and provide the proper attachment point for the tow bar, safety cables, lighting, and supplemental braking.
For base plates you will need # 521561-1. They are compatible with the Stowmaster tow bar. For safety cables I recommend... view full answer...
For a 1997 Honda Accord with a 4 Cylinder, you could use the Roadmaster base plate, part # 1523-2. This kit will fit a 1997 Honda Accord 4 Cylinder.
This kit features removable draw bars so that the kit is less noticeable when not in use.
I have added a link to this part below. view full answer...
When we installed the Curt Trailer Hitch Receiver # C11496 on a 2011 Honda Accord we found that from the ground to the inside top of the receiver measured 11-3/4". Since the bottom of your coupler is 17" off of the ground you need a draw bar that has aout a 5" rise.
For a drawbar I recommend using the Curt Drawbar # C45024 which is has a 5" rise and is rated for towing up to a 2,000 lb trailer with a max tongue weight (TW) of 200 lbs. You can use part # A-80 for a 1-7/8" hitch ball or... view full answer...
Out of the available trailer hitches for your 2015 Honda Accord I recommend going with the Curt Trailer Hitch Receiver # C11681 over the Curt item # C11496. They are both identical in Class and weight ratings and come with a 1-1/4" receiver. Please note that Class I trailer hitches are only rated to carry up to 2 bikes.
The Curt warranty requires a Stabilizer Strap # 18050 for all non-supported loads, like the Yakima HoldUp # Y02443, but it doesn't have the weld stop inside the receiver... view full answer...
The SportRack roof rack part # SR1010 that you referenced comes with everything needed to install on your customers 2013 Honda Accord.
This rack has a capacity of 130 lbs which would be enough for the dingy your customer is planning on carrying, but they will need to consult the owners manual of the vehicle to determine what Honda recommends for the roof capacity and be sure not to exceed that figure as well.
I attached an install video for this rack for you to check out also. view full answer...
There were several different tire size options available for the 2003, including tire size 195/65-15. Check the side wall of your tires to make sure that is the size they are. If you have a different size, let me know and I can recommend a different set of chains.
If you indeed have 15 inch wheels then the Rubber Adjuster # PW100 is easy to fit and tighten the chains and keep them in place.
I have included a link to our tire chain FAQ article for you. view full answer...
The only parts that you need to install the Rhino-Rack Vortex Aero crossbars, # RRVA118B-2, on your 2003 Honda Accord are the 2500 Series Leg Kit, # RRRLKVA, and the Custom DK Clamps and Pads, # DK030, that you referenced. You will not need any additional parts other than a bike rack, ski/snowboard carrier or cargo carrier depending on what you plan on carrying.
When choosing roof mounted accessories, there are a few things to keep in mind. First, the Rhino-Rack roof rack will have a crossbar... view full answer...
We have the exact mirror you need, though you didn't mention which side so I'll list both options for you.
The K-Source Replacement Side Mirror - Electric/Heated - Black - Driver Side # KS63576H and K-Source Replacement Side Mirror - Electric/Heated - Black - Passenger Side # KS63575H are OEM replacements that are confirmed to fit your 2007 Honda Accord sedan and will work perfectly for you. view full answer...
Exhaust tips are really just cosmetic trim items that provide visual appeal. It sounds more like your entire exhaust/muffler has an issue since the tip alone would not really change how loud the car is.
The MagnaFlow exhaust system # MF15800 you referenced is a complete stainless steel exhaust that does fit the 2004 Accord sedan with 3.0L V6 engine and this would replace your factory exhaust from the outlet of the catalytic converter to the tailpipe. This includes dual mufflers and it... view full answer...
Currently the only receiver options for your 2021 Honda Accord Touring 2.0T sedan are class I, 1-1/4" receivers like the Curt # C11525. The EcoHitch Receiver # 306-X7299 you found will only fit older Crosstour models. While we do have an Adapter # e93YR which will allow you to use 2" accessories with your 1-1/4" receiver, it will drop the weight capacity of the receiver by 50%. That would limit you to only 100lbs with the Curt receiver.
The Thule EasyFold XT Bike Rack # TH903202 is rated... view full answer...
I recommend the Curt # C11525 to tow with your 2018 Honda Accord. Both of them have about the same ground clearance and it will take some away from your car. This Curt hitch sits 11 inches from the top of the receiver opening to the ground.
In addition to the hitch receiver, you also need the recommended ball mount, part # 3593. The hitch balls that fit are # 19258 for a 2 inch ball or # 19256 for a 1-7/8 inch ball. You need to match the ball size to your trailer's coupler.
Finally,... view full answer...
A pin with a 1/4 inch diameter, like part # e98886, is standard for coupler locks. Unfortunately there are none that are 1/16 of an inch larger in diameter.
If instead you meant that you needed one with a span of 5/8 of an inch then you will want to go with the Master Lock Adjustable Trailer Coupler Lock # 2847DAT which has a 5/8 inch adjustment setting.
If you meant that the pin diameter needed to be 5/8 inches then you are looking for part # e98880. view full answer...
For your Rhino-Rack Vortex crossbars, like # RRVA137B-2, you can use the:
-Rhino-Rack Fairing for Roof Racks # RRRF3.
This fairing will work great with your Vortex Crossbars, measures 44" long, and includes the universal mounting hardware. view full answer...
Unfortunately, our manufacturers don't offer a 2 inch hitch for your 2015 Honda Accord.
If you can remove the battery packs and somehow get the weight of the bikes down to 65lbs each or less, we have a solution that would work for you.
You'd first need a Class I hitch like the # C11681 which has a 200 lb tongue weight capacity. For a rack, the Thule EasyFold, part # TH903202 can accommodate 2 bikes weighing up to 65 lbs each with tires up to 3 inches wide. For tires up to 4-11/16 inches... view full answer...
The Blue Ox Base Plate Kit # BX2260 referenced in your question is confirmed to fit your 2015 Honda Accord Sedan. Installation of this base plate kit does require some trimming of the bumper fascia along with some minor drilling. I have attached the complete written installation instructions for you to check out so you can see exactly what the process will entail. These custom-fit base plates will provide attachment points for the tow bar and feature hidden reinforcements for a nice, sleek... view full answer...
There a few different ways to determine this. You can have a helper activate the turn signals, running lights and brakes. If a single bulb lights for each function (on each side of the car) then you have incandescent lamps. If you have LED's each function will be illuminated by many, smaller lamps. I'll provide you with a photo showing an incandescent lamp next to an LED version of the same lamp. The lamps shown are on a trailer, not a car but you'll get the idea.
Or, you could open the... view full answer...
If you've got Thule WingBar Evo crossbars like the # TH711400 then you'll need the Replacement Foot for Thule Evo Roof Racks - Naked Roofs - Qty 1 # TH69FQ, which require a fit kit- the Fit Kit for Thule Evo Clamp Roof Rack Feet - 5208 # TH145208.
If you've got a different crossbar that are not Thule, then let me know and I can see if we can locate a solution for your crossbars. view full answer...
Go To Results