The Aluminum Bearcat Trailer Wheel # 274-000039 is rated for tire pressures up to 110 psi. You will need to replace the valve stem on this wheel with a higher rated one, as the existing valve stem is not rated for 110 psi tire pressure. If you need one, I recommend the Americana Metal, Bolt-In Valve Stem # AM20906, which is rated for over 100 psi.
Check out the videos linked below for more details on these products. view full answer...
From the center of the hitch pin hole to the furthest edge of the HitchMate TruckStep # HE4045 is about 20-1/2". If you need more room than that we have the XL version as part # HE4037 which measures 29-1/2" from the center of the hitch pin hole.
I have attached some diagrams that you can reference as well as some review videos. view full answer...
I recommend the Reese Goose Box 5th-Wheel-to-Gooseneck item # RP85FR. The Goose Box has an fully enclosed air bag and dual shock absorbers for a smoother ride. It has a trailer weight capacity of 20k lbs and a tongue weight max of 4k lbs. This Goose Box weighs 195 lbs. The 16k lbs Reese Goose Box item # RP94716-61301 weighs 178 lbs.
This Goose Box is designed to replace Lippert 1621, 1621HD, and 0719 pin boxes. Lippert pin box 1716 will work with this Goose Box, but a spacer kit item... view full answer...
The distance from the center of the axle to the bottom of the frame with the Timbren Silent Ride Suspension for Single Axle Trailers part # TSR2000S05 is 3-3/4". This will vary based on the load present but it won't change much. I unfortunately would not be able to inform of change with x weight as there are too many other factors. The recommended 3-4" from the top of the tire to the bottom of the fender will cover you in any scenario. view full answer...
The BAKFlip MX4 # BAK48204 can hold up to 400 pounds of evenly distributed weight on the cover. In addition, the BAKFlip MX4 # BAK48204 will fit your 2021 Ram 3500 with an 8-ft. bed. view full answer...
The correct rail kit for your 2012 Ram 3500 is the Curt Custom Fifth Wheel Installation Kit item # C16420-204. These brackets are custom fit and install in existing holes in your Ram's frame. This fits both the 6-1/2' and 8' bed lengths.
I have linked an installation video below.
To make towing with a 5th wheel easier I recommend adding the Curt 5th Wheel/Gooseneck Custom Wiring Harness w/ 7-Pole Connector - 10' Long item # C56000. This harness puts a 7-way connector in the bed of... view full answer...
I spoke with Torklift about the TorkLift Camper Anchor Relocation Kit part # TLA7004 and they informed me that you could easily shorten the length if needed by simply overlapping the pieces of angle iron and then just drilling new holes to secure the two pieces. That said, the overall length of the bracket is 85-5/8" so you may not need to shorten it.
I have emailed the installation instructions for you as well to help clarify any other questions you should have. view full answer...
I contacted the manufacturer for the Aries Oval Nerf Bars - 4" Wide - Polished Stainless Steel # AAS225040-2 who confirmed that each bar from bend to bend is 77.21 inches. These are a confirmed fit for your 2019 Ram 3500 with 4 door mega cab per Aries as well as our own fit guide. view full answer...
The best 5th wheel hitch for a Sidewinder pinbox is going to be the Reese M5 5th Wheel Trailer Hitch item # RP30928. This hitch has a 20,000 lbs capacity. You will also need the Sidewinder Wedge Kit for 20,000-lb Reese M-Series item # RP44FR. This will lock the kingpin inside the Reese M-5 so it doesn't rotate at the 5th wheel hitch.
For a 5th wheel rail kit that is compatible with your 2023 Ram 3500, I recommend the Reese Quick-Install Custom Installation Kit w/ Base Rails item # RP50085-58.... view full answer...
By my calculations the distance from the top most part of 5th Airborne coupler # 5AB-E510-710 to the skid plate is approximately 10-3/4 inches. Pin boxes like this fit in place of specific factory pin boxes. This one fits in place of Fabex 500, 503, 765 and 770, Lippert 1716, or RBW 7028 pin boxes.
To use a 5th Airborne pin box with a Demco auto sliding 5th wheel trailer hitch you just need the proper locking plate which would be # DM6062 for the above 5th Airborne. view full answer...
The mounting holes of the etrailer.com trailer coupler are spaced 3-1/16 inches apart on center. The holes themselves are a 1/2 inch in diameter. view full answer...
The spacing for the pucks on the Replacement Base for B&W Companion OEM 5th Wheel Trailer Hitch for Ram # BWRVB3600 is 39-1/8" L x 30-1/2" W from center to center of the pucks so you could expect and overall length of approximately 42" x 33".
As for the weight, the base has a shipping weight of 156lbs so minus the packaging you'd be looking at approximately 150lbs. view full answer...
Yes, it will. The B&W Turnoverball Underbed Gooseneck Trailer Hitch item # BWGNRK1314 will attach to preexisting holes in your 2015 Ram 3500. This gooseneck hitch is confirmed to work with all models of the 2015 3500 including the duallys.
I have linked an installation video below we did on a 2014 to help you get this gooseneck hitch set up.
To make towing with a 5th wheel easier I recommend adding the Curt 5th Wheel/Gooseneck Custom Wiring Harness item # C56000. This harness puts a... view full answer...
From the center to the edge of the frame of the Access Rockstar Custom Mud Flaps is approximately 39 inches. I've linked our selection of mud flaps by Access to fit your 2016 Ram 3500 dually for you to take a look at. They all use the same width of frame.
Personally, I like the look of the Rockstar XL # A10400211 view full answer...
We have two Reese M5 fifth wheel hitches that fit the OEM prep package of your 2019 Ram 3500 with the 20k Reese M5 part # RP30918 which weighs 187 lbs and the 27k version part # RP37FR that weighs the same. view full answer...
The B&W Companion 5th Wheel Trailer Hitch w/ Slider # BWRVK3400-5W referenced in your question will have a distance of 15 inches from the center of the gooseneck ball to the back edge of the Companion. The overall length of the 5th Wheel Hitch is 45 inches and has a width of 34-3/8 inches. If you are checking for clearance with a bed mounted accessory like a toolbox, you will just want to measure this 15 inch distance out from the center of your gooseneck ball to see if it will fit.
This... view full answer...
Base rail kits for 5th wheel trailers, including the Reese Semi-Custom Base Rail and Installation Kit for 5th Wheel Trailer Hitches - Dodge Ram # RP30035-186 that fits your 2011 Ram 3500, are not rated for any specific weight capacity. They are designed by the manufacturers simply to mount the 5th wheel hitch, and not take weight in the same way the jaws and head unit of the hitch do.
So it can definitely handle a 20,000 lb hitch like the Curt A20 5th Wheel Trailer Hitch # C16140.
I... view full answer...
There's three options to mount a Demco Hijacker 16k 5th wheel hitch in the bed of your long bed 2017 Ram 3500. Which one you need will depend on the legs your 5th wheel hitch has and whether or not your Ram has the factory tow package. I have listed the options below:
Industry Standard 5th Wheel Rails - B&W Custom Installation Kit w/ Base Rails item # BWRVK2605
Demco's Underbed System - Underbed Rail and Installation Kit for Demco UMS 5th Wheel Hitches item # DM8551006
Dodge OEM Puck... view full answer...
I went to the warehouse and took some measurements of the Curt Ball and Safety Chain Loops # C60618 for you.
The outside to outside dimension of the loop is 4-1/4 inches. I have attached a photo of the loop with the dimensions shown you can check out. I also attached a photo of the base and loop. The base measures 2-3/4 inches and from the outside edge of the base to the end of the loop the measurement is 4-3/4 inches. Per the instructions the chain loops should face the center of the... view full answer...
Go To Results