Dimensions of the HitchMate TruckStep Extendable, Hitch Mounted Step  

The HitchMate TruckStep Extendable, Hitch Mounted Step, #HE4045 fits most vehicles but you will want to take some measurements to be certain it fits your 2020 Ford Expedition Max Platinum. First measure from the center of the hitch pin hole to the…

I have a solution for you but there are not hitch steps that have a drop and fit a 2-1/2 inch hitch. First you will need a reducer sleeve such as #C45405. Then you could use hitch step #RHS2 which is 2 steps with the first step with a drop below the…

The Extendable Hitch Mounted Step for 2" Hitches part #288-08400 is only offered with the included 9-1/4" long x 5-1/8" wide platform. That said, we do have a very similar option with larger platform, the HitchMate TruckStep XL…

I can help you determine if the Heininger HitchStep #HE4045 will fit your Chevrolet Silverado 4x4 Z71 Off Road Package 8ft bed. Once the truck step #HE4045 is inserted into a trailer hitch the telescoping support arm will sit 1-5/8 inches below the…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

To install a brake controller like the #5504 that you referenced you only need to connect it to 4 wires. If you find more wires on your vehicle than would be needed to install the controller you wouldn't need to do anything with them. I attached…

The WeatherTech #WT81BS1 will extend out just over 9 inches, which wouldn't be far enough that it can be used with the tailgate lowered. The Heininger HitchMate #HE4045 will extend a step up to 23-1/2 inches rearward of your receiver opening.…

That will really depend on how long you are needing the step to be. All of the hitch steps we offer are designed for 2" receivers, so to be able to use one of these with the 2-1/2" receiver on your 2018 Ram 2500 I first recommend the Brophy…

Due to the length of the Buyers Products 18 " Hitch Receiver Extension with Step #3371804017 that you referenced there isn't a way to use it with a ball mount without cutting the capacity by 1/3 like you mentioned.

You are correct, using the 30% capacity reduction of the Buyers Products Hitch Extension #3371804017, the capacity of your Torklift hitch, and the weight of your trailer you would easily have the capacity to tow your trailer!

We have your needed items. For your 2015 Ram 3500 we have the TorkLift SuperHitch Magnum Trailer Hitch Receiver, #TLD1108-30. This is a custom fit - Class V - 2" hitch and with your truck bed camper instralled, use one of TorkLift's…

The hitch opening location for the Torklift Hitch part #TLF1002-30 that you referenced will be very close to where you current hitch opening is. If the 28 extension part #TLE1528 would work well based on your current measurements it would be a great…