How To Determine Fender Placement When Using 2K Timbren Silent Ride Suspension
Question:
How many inch’s it will with 1500 lb load? Try to figure out the clearance for my fender. Thank you
asked by: Stephan B
0
Expert Reply:
The distance from the center of the axle to the bottom of the frame with the Timbren Silent Ride Suspension for Single Axle Trailers part # TSR2000S05 is 3-3/4". This will vary based on the load present but it won't change much. I unfortunately would not be able to inform of change with x weight as there are too many other factors. The recommended 3-4" from the top of the tire to the bottom of the fender will cover you in any scenario.
expert reply by:
Conner L
0
Product Page this Question was Asked From
Timbren Silent Ride Suspension for Single Axle Trailers w/ 2" Round Axles - 2,000 lbs
- Trailer Suspension Parts
- Leaf Spring Replacement System
- Camper
- Car Hauler
- Utility Trailer
- 2000 lbs
- Round Axle - 2 Inch
- Single Axle
- Timbren
more information >
Continue Researching
- Q&A: U-Bolt Hole Spacing for Timbren TSR2000S04 Silent Ride Suspension System for Single Axle Trailers
- Q&A: Recommended Lift Kit For a 5' X 8' Single Axle Trailer To Install Larger Wheels and Tires
- Q&A: Fit and Compatibility of CE Smith Guide-On Post # CE27620 on Boat Trailer with 1-1/4 x 2-1/2 Frame
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Q&A: Tallest Trailer Tire Size for 15" Wheels
- Q&A: Recommended Off-Road Wheels and Tires for Timbren Axle-Less Trailer Suspension
- Q&A: Difference Between an Idler Hub and a Hub/Drum
- Q&A: How to Determine Square and Round Tube Axle Capacity
- Article: How to Choose a Trailer Hitch Coupler