There isn't a brake controller port that I am aware of on your motorhome built on a 2004 Workhorse W22 chassis, but you can check up under the dash for a bundle of wires; they would have a white tag on them. It would generally be to the far left side under the dash if they are there.
If those wires are there you would be able to simply splice in the Tekonsha Prodigy P3 Trailer Brake Controller # 90195.
If that bundle of wires is not there you will need the Wiring Kit for 2, 4, 6, and... view full answer...
The Timbren front kit part # TWFRW22 that fits your 2005 Workhorse W22 is much stiffer than the # SSF-280-47 you have now. If stiffer and more supportive is what you want this would be the way to go. If you are wanting a softer ride though this is probably not going to be it. view full answer...
I checked with Roadmaster and the correct Roadmaster Exact Center Steering Stabilizer for a 2002 Workhorse W-22 Chassis is part # RM32RR for GVWR's over 22K or part # RM88RR for GVWR's under 22K. view full answer...
If your existing leaf springs originally measured 25-3/4 inches, it is highly likely that you can put 26 inch long leaf springs, like # e27SR, on your trailer without needing to change the equalizers or move your spring hangers.
If the existing springs originally measured 25-1/4 inches, moving up to 26 inch long springs will likely require some adjustments for your trailer.
Using leaf springs that are longer and have more leaves will not help lift your trailer. Two ways to help lift... view full answer...
A product like the Timbren front-axle Suspension Enhancement System # TGMFP30W is intended to provide support to a front suspension that is in good working order but that needs some help when handling a heavy front-end load like a snowplow. Since your suspension could be over 15 years old, if you are finding it sagging without an extra load like a plow then you might want to have it checked out by a qualified shop to ensure all is well.
If so, then the Timbrens will give you extra support... view full answer...
The Roadmaster TruTrac Front-Axle Trac Rod for Large Trucks and RVs # RM-TRACW-22 is manufactured in-house at Roadmaster's Vancouver, Washington facility. We list it as being made in the USA and I called Roadmaster as well and confirmed it, so you don't have to worry about using a non-American made trac rod on your 2003 Workhorse W22 Motorhome. view full answer...
I confirmed with my contact at Superchips that their Flashpaq F5 Performance Tuner # SU2845 is a confirmed fit on the 2005 8.1L GM power plant in your Workhorse. Do note this tuner is not legal for use in California. view full answer...
The Air Lift LoadLifter 5000 Ultimate Air Helper Springs # AL88101 are confirmed to fit the front of your 2003 Dolphin with the Workhorse W22 chassis. These have the internal jounce bumpers that will help to reduce bouncing and reduce the risk of damage to the bags in the event they become under inflated.
We also have the matching Air Springs # AL88202 for the rear suspension. These also have the internal jounce bumpers.
I recommend using the Air Lift WirelessAIR Compressor System #... view full answer...
For your 2010 Winnebago Adventurer 37F with 2009 Workhorse W24 Chassis, the Roadmaster Reflex Steering Stabilizer with Mounting Brackets for Class A Motor Homes # RM-RBK13-RSSA is a great choice and a confirmed fit. It keeps your motorhome in line by constantly working to maintain its position. It minimizes wander and corrects oversteering so the driver doesn't need to work as hard to steer so it reduces fatigue.
The Roadmaster Front Anti-Sway Bar for Motor Homes # RM-1259-106 improves... view full answer...
I do have suspension enhancement options for a 2002 Workhorse P42 Chassis but there are no air bags available unfortunately. Instead, you can use the Timbren Rear Suspension Enhancement System. The correct one will be based off the suspension. The part # TGMRP30MH is for models with bump stop over u-bolt pad and part # TGMRP30 is for models with bump stop on the frame. These options all work well to provide additional support. view full answer...
We do have a number of suspension enhancement options that are going to fit your 2004 Gulf Stream Sun Voyager 8368MXG built on a Workhorse W-22 chassis, but there isn't a SuperSprings Stabilizer and Sway Control Kit for this motorhome.
The best option for sway control for your motorhome is a rear anti-sway bar because they are better constructed with higher-strength, thicker steel than OEM sway bars. This means the bars are stronger with much higher roll stiffness to combat sway, and their... view full answer...
While we don't currently have any Blue Ox branded suspension enhancement for your Thor Four Winds Hurricane on a Workhorse W18 Chassis we do have the following Roadmaster enhancements:
Roadmaster Front Anti-Sway Bar # RM-1259-115.
Roadmaster Rear Anti-Sway Bar # RM-1259-118.
Roadmaster Reflex Steering Stabilizer with Mounting Brackets for Class A Motor Homes # RM-RBK8-RSSA.
We also carry a front anti-sway bar with a TruTrac Rod which will give you better control of the side-side and... view full answer...
Your 2007 Fleetwood Bounder is built on a Workhorse W Series chassis so for a steering stabilizer you would want the part # RM-RBK13-RSSA which is a confirmed fit and would work well.
The sturdy steel spring on this stabilizer keeps your vehicle in line by constantly working to maintain its position. Mount it between the steering mechanism and the chassis for a tight connection that will minimize wander and correct oversteering. view full answer...
The correct steering stabilizer for a 2002 Safari Trek 26 Motorhome on Workhorse P Series Chassis is the Roadmaster Reflex Steering Stabilizer with Mounting Brackets part # RM-RBK3-RSSP30 so long as you don't have a factory steering dampener. view full answer...
The correct SumoSprings Solo Custom Helper Springs for a 2009 Workhorse W-22 Chassis is part # SSF-280-47 which is sold as a pair. I have attached an install video I did below as well. view full answer...
To replace your Kwikee Series 32 903206000 RV steps you'll need the Kwikee Electric RV Step Complete Assembly # LC372261. This kit will come with everything you need; steps, motor, switch kit, and controller to completely replace your outdated RV steps. view full answer...
According to my research the Roadmaster Rear Anti-Sway Bar part # RM-1259-109 will install on the 2004 Newmar Scottsdale that is on a 2003 W-22 Workhorse chassis. The Newmar Scottsdale from my research is 33-1/2 ft so according to Roadmaster you will not have any issues installing the sway bar. If the motor home was shorter than 33 ft the sway bar would not fit properly and you would need part # RM-1259-108.
The metal box in the photo does not interfere with the installation location... view full answer...
Since you have a Workhorse W22 Chassis you should have the Air Lift LoadLifter 5000 Ultimate System # AL88202 which would mean you need the Replacement Air Spring for Air Lift LoadLifter 5000 Ultimate System - Rear Axle # AL84201 to replace the bellows.
If you don't have the "Ultimate" and have a different model then let me know and I can find the correct replacement for you. view full answer...
I did some digging on your 2006 Itasca and it looks to be built on a Workhorse W series chassis so for a rear sway bar you'd want the part # RM-1259-108. Then for the front bar you'd want the part # RM-1259-105. view full answer...
We do have both front and rear SumoSprings (made by SuperSrings) which fit your 2004 Gulf Stream 8368 MXG on a Workhorse W22 chassis. The correct fit for your motorhome are the following:
- Rear: SumoSprings Maxim Custom Helper Springs # SSR-280-54-1
- Front: SumoSprings Solo Custom Helper Springs # SSF-280-47
These will do a great job helping to keep your Gulf Stream stable and balanced for a smoother, more controlled ride. view full answer...
Go To Results