Roadmaster Anti-Sway And Stabilizing Systems For Workhorse W24 Chassis
Question:
2010 Winnebago Adventurer 37F: W/A 2009 W24 Workhorse Chassis: Thinking Of Ordering: RM-1259-106 RM-RBK13-RSSA RM-1259-109 Front Sway Bar RM-1259-106 Has Stabilizer With It. Do You Offer A Package For Back That Has Stabilizer Bar In Kit Like Front Kit?
asked by: Dave W
Expert Reply:
For your 2010 Winnebago Adventurer 37F with 2009 Workhorse W24 Chassis, the Roadmaster Reflex Steering Stabilizer with Mounting Brackets for Class A Motor Homes # RM-RBK13-RSSA is a great choice and a confirmed fit. It keeps your motorhome in line by constantly working to maintain its position. It minimizes wander and corrects oversteering so the driver doesn't need to work as hard to steer so it reduces fatigue.
The Roadmaster Front Anti-Sway Bar for Motor Homes # RM-1259-106 improves the stability by minimizing side to side movement. It allows for a level ride on irregular surfaces and reduces the effects of crosswinds and shifting cargo. This system does have that integrated tru-trac bar that you mentioned. My contact at Roadmaster says this is the best system because is limits the side to side axle movement to almost nothing so that it is only up and down. This keeps your vehicle in line better and when used with the steering stabilizer really makes your motorhome travel well.
For the rear stabilizer they don't have a system for your chassis that has that tru-trac bar, but they did say the Roadmaster Rear Anti-Sway Bar for Motor Homes # RM-1259-109 is the stronger system with its 1-3/4 inch diameter bar.
I believe you will be surprised by the increased handling of your 2010 Winnebago Adventurer with these components.
Products Referenced in This Question
Roadmaster Rear Anti-Sway Bar - 1-3/4" Diameter
- Anti-Sway Bars
- Anti-Sway Bar
- Rear
- 1-3/4 Inch Diameter
- Steel w Polyurethane Bushing
- Roadmaster
more information >
Roadmaster Reflex Steering Stabilizer with Mounting Brackets for Class A Motor Homes
- Anti-Sway Bars
- Steering Stabilizer
- Includes Mounting Hardware
- Roadmaster
more information >
Product Page this Question was Asked From
Roadmaster Front Anti-Sway Bar and TruTrac Rod Kit - 1-5/8" Diameter
- Anti-Sway Bars
- Anti-Sway Bar
- Front
- 1-5/8 Inch Diameter
- Steel w Polyurethane Bushing
- Roadmaster
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Hitch
- Video: Roadmaster Anti-Sway Bars - Steering Stabilizer - RM-RBK13-RSSA Review
- Shop: Vehicle Sway Bars
- Shop: Roadmaster Reflex Steering Stabilizer with Mounting Brackets for Class A Motor Homes
- Shop: B&W Heavy-Duty Trailer Hitch Receiver - Custom Fit - Class V - 2"
- Q&A: Replacement RV Trailer Hitch Compatible with Workhorse Chassis
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: Draw-Tite Ultra Frame Trailer Hitch Receiver - Custom Fit - Class V - 2"
- Q&A: Replacement Power Converter On a 2014 Thor Hurricane 27K
- Article: RV Sway Control, Stabilization, and Suspension Enhancement
- Article: Stability Control for Heavy Duty Vehicles
- Q&A: Comparing Roadmaster and Hellwig Sway Bars for Motorhome Built on E-450 Chassis
- Article: Performance Chips and Modules
- Q&A: Recommended Sway Bars for a 2018 Jayco Redhawk Class C on a Ford E-450 Chassis
- Q&A: Does Roadmaster Exact Center Stabilizer for 2018 Thor Four Winds 24F Use More than 150 Ft lb Torque
- Q&A: How to Improve Control of a Forest River Forester 3011DS
- Q&A: Recommended Steering Stabilizer For A 2023 Ford E-450 Chassis Class C Motorhome
- Article: Choosing the Right Suspension Kit for Your Truck and Trailer
- Article: 30-Amp and 50-Amp RV Service: What's the Difference?
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: What is Overlanding? How to Start your Overlanding Journey