Of the two bike racks you referenced, I recommend the Hollywood Racks Trail Rider # HR200Z over the Swagman XTC-2 # S64670 because the Trail Rider gives you more security and ground clearance than the XTC-2.
The Hollywood Racks Trail Rider and Swagman XTC-2 are similar but the Trail Rider will secure both your bike and your daughter's bike with its locking ratcheting hooks; it also locks to your hitch which helps protect your investments. The XTC-2 can lock as well but you would need to... view full answer...
Our hitch manufacturers like Curt who makes the # C11540 that fits your 2023 Volkswagen Jetta basically will make a hitch for any vehicle there is a demand for. A lot of people aren't worried about voiding warranties but more importantly you are protected by the Magnuson Moss act. The Magnuson–Moss Warranty Act in short states that manufactures cannot void the entire warranty of a vehicle simply because they installed an aftermarket component. view full answer...
Yes, we have confirmed that the Tekonsha # 118811 will fit the 2023 VW Tiguan. The T-One connectors will plug into the connection points in the rear cargo area. Once installed, you'll have a 4-way to power your trailer's signal lights.
If you also need a trailer hitch, I recommend the etrailer Trailer Hitch Receiver # e43ZR. This is identical to the Curt # C13381 you looked at but with a matte black powder coat finish. This does a better job hiding dirt and dings compared to a glossy finish.... view full answer...
I checked with the manufacturer and can confirm for you that the Curt Trailer Hitch Receiver # C11234 definitely fits a 2018 Volkswagen Passat GT.
So it will fit your Passat GT, though our returns policy is that if we make an error, you will not be charged any type of fee.
I have added a link to a video install for you to check out as well of the Curt Trailer Hitch Receiver # C11234. view full answer...
I'm glad to hear you like the trailer hitch on your 2010 Nissan Maxima! While there are hitch fits for your 1998 Volkswagen New Beetle, these aren't the same as the hitch for your Maxima so you'll need to get a whole new hitch due to the overall design of the hitch and how it fits to the vehicle.
For '98 New Beetle I recommend picking up the Curt Trailer Hitch # C11066 which is a Class I hitch with a 1-1/4" receiver that will fit directly to the holes in the frame of your vehicle.
Attached... view full answer...
The Curt hitch part # C13381 does fit your 2021 Volkswagen Tiguan and comes with all hardware needed to install including bolts and blocks since the frame does not have threads.
I attached an install video for this for you to check out as well. view full answer...
To fit the 50" Inno Square Crossbars # INB127 on your 2015 Volkswagen Passat you also need the following:
Feet - # INSUT
Fit Kit - # INK591
Attached is an installation video of this roof rack on a 2015 Passat for you to reference. If you let me know what you're planning on using the roof rack for I'd be more than happy to make some recommendations for you! view full answer...
Yes. The etrailer # e98906 will be plenty strong to allow you to carry a bike rack and bikes with a weight of up to 350-lbs total on your 2018 Volkswagen Tiguan. This hitch has a 2" receiver that will allow you to carry a wide variety of hitch mounted accessories, in addition to a bike rack.
If you're looking for a 3 bike rack to use on your new hitch, I recommend using the RockyMounts Westslope # RKY10223 because the platform makes it easy to get bikes on and off, plus this rack tilts... view full answer...
As long as your 2017 Volkswagen Jetta Sedan is not the GLI model the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118572 will fit perfectly.
To get the most up-to-date price on the # 118572 you will want to click on the link to be taken to the product page which will list the price.
I included a video of the # 118572 being installed on a similar 2016 Volkswagen Jetta Sedan for you to take a look at. view full answer...
You can indeed upgrade to the 2000 lb rated spring bars, part # BXW4014. The Sway Pro systems from the highest to the lowest rated all use the same weight distribution head. To change the weight rating of the system, you'd simply swap out the spring bars.
I've confirmed this with Blue Ox for you. view full answer...
Since the mounting hardware of the Airscreen XT part # TH72WV is universal it can basically install on any crossbar so it does not have to be a Thule crossbar. view full answer...
There are multiple trailer wiring harness options for a 2019 Volkswagen Golf because there are so many different trim levels; GTI, Alltrack, R, Sportwagen, etc. In order for us to confirm fit we will need to know which exact one you have. The Tekonsha T-One part # 118646 fits most models but there are ones it does not fit such as the Sportwagen and Alltrack and in which case you would use the ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation... view full answer...
I do have a solution for you, however the Draw-Tite Sportframe Trailer Hitch Receiver # 24926 referenced in your question is only designed for and confirmed to fit the will fit the 2017 Jetta, but not the 2012-2013 Volkswagen Beetle Coupe, both Gas and Turbo Diesel models.
As long as your 2017 VW Jetta is not the Hybrid/TDI model, I recommend the Draw-Tite Sportframe Trailer Hitch Receiver # 24926. This Class I hitch is confirmed to fit your vehicle and will provide a 1-1/4 inch receiver... view full answer...
The Draw-Tite Class I receiver hitch, part # 24679 is indeed a fit for the 2005 VW Beetle with a turbo Diesel engine. I've confirmed this with Draw-Tite.
Once the hitch is installed, it'd make a perfect attachment point for a 2-bike rack. I've linked you to our selection of class I compatible 2 bike racks.
If you click the provided link, you can see a video showing the hitch being installed on a 2005 Beetle. view full answer...
The Yakima JayLow Kayak Carrier w/ Tie-Downs - J-Style or Post Style, part # Y04073, will work be able to straddle the towers with no problem. I do recommend moving the inside clamps of your JayLow as far inside the tower as you can while keeping the other feet outside of the tower. You still might be able to use the 8.3" and keep the JayLow inside the towers. It has dimensions of L 6.69 " x W 6.00" x H 20.00". I am not sure if that takes the angle of the carrier into consideration but... view full answer...
I reached out to my contact at Draw-Tite and he was able to confirm that the Draw-Tite Trailer Hitch Receiver # 24978 you were looking at is confirmed to fit your 2019 Volkswagen Jetta GLI Autobahn edition with dual exhaust so you can finally get a hitch installed on your car.
The # 24978 is a Class I hitch with a tongue weight rating of 200lbs and a trailer weight rating of 2000lbs making it a great option for a bike rack, cargo carrier, or even a ball mount for light duty towing. You... view full answer...
Yes, the Curt Vehicle Wiring Harness # C59236 that you referenced is compatible with LED and incandescent bulbs so it would work well for what you are trying to do. view full answer...
The Blue Ox Apollo Tow Bar is what you'll want to use on a 2007 Volkswagen Jetta. In order to connect you'll also need the Blue Ox Base Plate Kit part # BX3823. I don't have any options for a Tow Me 5000 Tow Bar unfortunately. In regards to wiring, the Roadmaster Universal Hy-Power Diode Wiring Kit part # RM-154 is a great option and will work well. view full answer...
Yes, you are correct that Tow Ready wiring harness # 118667 is intended for only the 4-door sedan versions of the Jetta. For a 2009 VW Jetta Sportwagen TDI Tow Ready does not offer a wiring harness. However, Curt does have 4-pole wiring kit # C59236 that is a confirmed fit for the 2009 Volkswagen Jetta Sportwagen Wagon, including the TDI.
I linked an installation video for this item showing a 2009 Sportwagen TDI.
You can use install kit # 55151 to simplify the process. This includes... view full answer...
The only trailer wiring harness currently available for your 2012 Volkswagen Jetta is # 118572. I have included a link to a video to the right that shows how this harness installs. I have also linked the instructions. view full answer...