It looks like you are referring to the Thule Gateway Pro 2 Bike Rack - Trunk Mount - Adjustable Arms # TH88VR. This is confirmed to fit your 2017 Volkswagen Jetta and it is designed to be compatible with vehicles that have factory spoilers. You will not have any issues if you have the factory lip/spoiler installed. I attached a demonstration video which shows this bike rack being installed on a Jetta without a spoiler, but you can see that the arms are arched in order to clear the trunk... view full answer...
In order to make sure you choose a roof box that will work on your 2013 Volkswagen Jetta, you will need to take a measurement.
You will need to know the crossbar spread, or the distance from center to center of the crossbars on you roof. For the Thule Pulse Alpine Rooftop Cargo Box, part # TH613, the minimum crossbar spacing is 23-5/8 inches and the maximum spacing is 35-3/4 inches. If your crossbar spread is between those numbers, the # TH613 will work well for you. I have attached a... view full answer...
Yes, it does. The Draw-Tite Trailer Hitch item # 24978 is confirmed to fit the 2023 Jetta GLI. This hitch is custom fit and bolts to your VW with included hardware. I really like this hitch because the crosstube mounts behind the rear bumper. This leaves only the 1-1/4" receiver showing which not only looks better but helps with ground clearance.
I have linked an installation video below. view full answer...
Yes, I checked with Thule and the Thule Passage 2 Trunk Mounted Bike Rack # TH910XT that you referenced is confirmed to fit your 2013 Volkswagen Jetta sedan.
I attached a review video for this product and installation instructions for you to check out also.
If you plan on carrying any womens or alternative framed bikes without horizontal top tubes you may also be interested in purchasing a Thule Bike Adapter Bar # TH982XT to provide a horizontal top tube on your bikes to provide an attachment... view full answer...
I reached out to my contact at Draw-Tite and he was able to confirm that the Draw-Tite Trailer Hitch Receiver # 24978 you were looking at is confirmed to fit your 2019 Volkswagen Jetta GLI Autobahn edition with dual exhaust so you can finally get a hitch installed on your car.
The # 24978 is a Class I hitch with a tongue weight rating of 200lbs and a trailer weight rating of 2000lbs making it a great option for a bike rack, cargo carrier, or even a ball mount for light duty towing. You... view full answer...
For a trailer hitch that will fit your 2019 Volkswagen Jetta with dual exhaust I recommend the Draw-Tite Sportframe Trailer Hitch Receiver # 24978. The Curt # C11540 will not fit the dual exhaust model. The # 24978 is also a Class I hitch with a 1-1/4" receiver just like the Curt. It has a concealed cross tube for a factory look and a 200 lb max tongue weight to handle any accessories you may have.
I have attached an installation video for your reference. view full answer...
The EcoHitch # 306-X7311 fits the standard 2014 Volkswagen Jetta as well as your TDI model so you're good to go!
Attached is an installation video of this hitch on a 2016 Jetta for you to check out. view full answer...
The Curt Trailer Hitch Receiver # C11474 is our only receiver confirmed to fit on your 2012 Volkswagen Jetta TDI Sedan. This is a class I receiver with a 1-1/4" opening.
I recommend installing the T-One Vehicle Wiring Harness # 118572 when you install the receiver. This will give you a 4-way flat connector for operating the lights on most small trailers. It will also allow you to use Auxiliary Lights # C53201 with any hitch mounted accessory which impairs the view of the tail lights on... view full answer...
I have a solution for you and a great hitch for your 2021 VW Jetta with dual exhaust but the Curt Trailer Hitch item # C11540 you were looking at will not fit. Instead you will want the Draw-Tite Sportframe Trailer Hitch Receiver item # 24978. This hitch is custom fit and bolts to your Jetta with included hardware. It mounts behind the rear bumper instead of below your frame. This gives you better ground clearance and appearance. The Draw-Tite hitch also avoids any compatibility issues... view full answer...
Good question, yes it is compatible.
The Blue Ox Base plate listed below will mount to your 2003 VW Jetta and work with a Demco Kwik-Tow tow bar.
**Blue Ox Base Plate Kit - Removable Arms # BX3827 view full answer...
The Malone Profile18B Rooftop Cargo Box part # MPG911 will store up to 18 cubic feet of cargo. The external dimension of the box are 78-3/4" long x 32-3/8" wide x 15-3/4" tall. The box weighs 35 lbs and can support up to 165 lbs of gear through you will need to check your vehicle's roof weight capacity for compatibility.
As long as the crossbars on your 2015 Volkswagen Jetta are between 24" to 36" apart and the crossbars are of a standard size then the above box should provide just enough... view full answer...
As long as your 2017 Volkswagen Jetta Sedan is not the GLI model the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118572 will fit perfectly.
To get the most up-to-date price on the # 118572 you will want to click on the link to be taken to the product page which will list the price.
I included a video of the # 118572 being installed on a similar 2016 Volkswagen Jetta Sedan for you to take a look at. view full answer...
Using the Draw-Tite Sportframe Trailer Hitch Receiver # 24978 on your 2019 Volkswagen Jetta the receiver is capable of supporting a trailer up to 2,000lbs with a tongue weight up to 200lbs. You will want to verify towing capability with your owners manual or dealer service department to determine exact capacities for your Jetta.
More than likely with Endeavor rating the trailer for a class II receiver is for one of 2 reasons. As they list the dry weight at 530lbs with a load capacity... view full answer...
The Kuat Sherpa 2.0 Bike Rack, # SH12G, will definitely work with your 2011 Volkswagen Jetta. The 2011 and the 2012 Jetta have the same generation body style, so any differences will be very minimal. I cannot say for sure if the ground and bumper clearance will be the same as the 2012 since we have not had a chance to install this bike rack on a 2011, but I am confident that you will have no issues using this bike rack and all of the features it has to offer.
This bike rack would be my... view full answer...
I checked with Yakima, this Yakima FullBack 2 Bike Trunk Mounted Rack, part # Y02634, will work fine on your 2006 Volkswagen Jetta 4-door diesel.
I attached installation instructions and a review video of this product below for you to check out.
You may also be interested in purchasing a Yakima Tube Top Bike Adapter Bar, part # Y02531, if you plan on carrying womens or alternative framed bikes. Instructions and review video for this product are below also. view full answer...
From all of the installs I've done with the Rhino Rack Aero Crossbars # RRVA126B-2 # RRRLKVA and # DK424 there is usually plenty of space to open a panoramic roof. Measure from your roof to the top of the opened sun roof. It it exceeds 3-1/2 inches it will not work. I am very confident that you will not have issues with clearance on your 2019 Volkswagen Jetta. view full answer...
The Rola Roof Mounted Cargo Basket 59504 uses mounting hardware that will fit roof rack crossbars up to 1-1/4- tall x 3-1/4-inches wide, AS LONG AS the centers of the two bars are spaced apart one of four specific dimensions. Those bar spacing dimensions must be either 26-1/4, 30, 33-3/4 or 37-1/2-inches. As long as your bars meet the size and spacing requirements this steel cargo basket will fit well.
If you need a roof basket that will fit larger bars and/or bars with different spacing... view full answer...
If the hole is the correct diameter, I do not see why the Optronics Drop In Cup Holder with Handle Rest - 2 Tier - 2-1/2" Tall x 3-5/8" Diameter, part # 09017101B, would have a problem fitting in that hole. It does come with 3 screw holes on the bottom, so you will be able to secure it as well.
I have included a video demo link below. view full answer...
The drop leg # JF-1005H-Z fits 2,000 pound etrailer and Ram jacks as well as topwind 5,000 pound jacks, like part # TJA-5000-B but it doesn't fit the 5,000 pound sidewind jacks like # TJA-5000S-B.
The inner tube on the 5k sidewind jacks have a thicker inner tube that doesn't allow the leg to slide up inside. view full answer...
The Konig Standard Tire chains # TH01221095 will fit your 2010 Jetta TDI with the 225/45-17 tires. Each set includes two chains which should be mounted to the drive wheels.
You will want to check your owners manual for any prohibitions or special instructions regarding using tire chains. view full answer...
Go To Results