The adapter to change from a square bar to an aero bar on the High Roller is the Mighty Mount 39H Accessory Adapter part # Y03539. This will fit the original bolt and allow you to attach to your roof rack. view full answer...
According to the folks at Yakima, the front clamp is integrated into the rack and isn't removable, with the exception of the front tensioning handle, which is available as part # 8880190. The rear clamp assembly is available as part # 8880208. The assembly includes the tray mount, top pads, bottom aero mount, screw and top fastener. view full answer...
The tail lights you have on your trailer are the ONE LED Trailer Tail Lights part # STL0067RPG for the driver side and part # STL0066RBG for the passenger side. Unfortunately, Optronics does not offer a replacement lens for this particular light so your only option is to replace the entire assembly but this is super easy to do. It should just be plug and play once you remove the mounting hardware. view full answer...
There is indeed a suitable replacement.
The Fulton 1588S00 was replaced by the # F501115 which we carry. They are sold in a quantity of 2. view full answer...
The Replacement Lock Cap # SR05016000000 referenced in your question is just the outer cap and does not include the plastic lock cylinder. I spoke with my contact at SportRack and she stated that the lock cylinders for this unit are not available as replacement parts.
This cap is designed to fit the SportRack Frontier Roof Rack (SR1009). view full answer...
I called my contact at Redline, and they told me that they use the same lock and key for their flush mount door latches. So you could order 4 of part # L1883 and they would all be keyed alike. If you need a larger latch, 4 of part # L3980 would also be keyed alike. Both of these flush mount locking door latches use the same key number. view full answer...
I spoke with my contact at Thule who said that the only thing that was able to adapter your Thule Cascade roof box to aero style bars was the XADAPT10 adapter kit but that has been discontinued for quite awhile.
At this point in time you either need to replace your cargo box or see if there are any places that carry the older XAPAT10 kit for you to use. view full answer...
We sure do! To replace the anti-rattle hitch pin for your 24x60 etrailer Cargo Carrier # e98874 I recommend using the Threaded Anti-Rattle Pin Lock # e99047 so you take out any play in the cargo carrier moving in the receiver, plus it secures your carrier to the vehicle with a lock. view full answer...
The correct replacement lens for the clearance light on your motorhome is the Replacement Red Lens for Optronics MC32RB and MCL32RB Trailer Lights part # A32RB.
In regards to a high-low adapter, measure from the center of the hitch on the motorhome to the ground and then subtract the distance from the center of the base plate kit to the ground on the towed vehicle. The difference is the amount of rise/drop you'll need. The Roadmaster High-Low Adapter for Tow Bars part # RM-048-6 offers... view full answer...
To get the hardware needed to install the Curt Trailer Hitch Receiver # C13135 on your son's 2016 Subaru Crosstrek you will need to order the Replacement Hardware Kit # RHK. You will need to enter the hitch number(13135) when ordering to ensure you get the correct kit for your receiver. view full answer...
Thule and SportRack use the same locks and keys. Although the R-series locks and keys are not manufactured anymore, the N-series keys will fit in the R-series locks. This has been confirmed by Thule.
For your R152 lock you will need the Replacement Key for Thule and Sportrack Racks and Carriers # THKEYN152. view full answer...
We do have what you need, but the Replacement Strap for Thule Caravan Quest Roof Mounted Cargo Bag # 853-5907 is not the correct replacement strap for your Thule Outbound Rooftop Cargo Bag # TH868.
I contacted the manufacturer and the correct replacement strap for your Thule Outbound cargo bag is the Replacement Strap for Thule Tahoe Roof Mounted Cargo Bag # 8535494. view full answer...
The correct seals for a Yakima SkyBox 16 Roof Cargo Box are the Replacement Seal Strips for Yakima SkyBox Series Rooftop Cargo Box part # 8870086. view full answer...
I verified with Thule that the correct foot pack for your 2008 Subaru Impreza Wagon are the # TH460R with Fit Kit # THKIT3068.
Thule stated the the TH430 Foot Pack was a fit for the Impreza Wagon from 1995 to 2001 so it's not going to work with your 2008.
If you don't already have the SquareBars you'll need # TH712200. view full answer...
I have a replacement option for you. Unfortunately, Rhino-Rack does not carry just the replacement keys themselves. However, they do make replacements that come with the key and lock cylinders. The most cost efficient route is to purchase the Rhino-Rack Masterkey Lock Barrels - Keyed Alike - Qty 2 # RRRK012-2. With this set, you will receive the replacement key coded to 012 as well as 2 additional spare lock cores. view full answer...
When installing Draw-Tite trailer hitch # 24710 the exhaust hanger will be suspended from the hitch using a 7/16 inch hex bolt. But you should know that none of the hitch hardware can be reused. You have to get all new hardware because it is meant to be torqued down only once.
For replacement hardware you will need # RHK. Enter the hitch number and manufacturer on the RHK page to get the correct hardware for the hitch. I have linked a video showing installation of the hitch as well as... view full answer...
The easiest replacement would be to replace the 7-way used in the # ETBC7 kit, which is # 37185.
You could use the Curt # C58000 bracket if need be, but I'd recommend going with the Hopkins # HM47210 7-way instead. The # HM48480 you referenced doesn't include a pigtail, so it wouldn't work for you.
If you click the provided link, you can view a video that explains the wire color codes. view full answer...