In order to replace the hinge on a Thule Motion XT Rooftop Cargo Box like part # TH629806 you'll need to obtain the Replacement Lid Lifter Hinge for Thule Motion XT Cargo Boxes part # 1401495200. This lid lifter/hinge works on either the front or rear. Unfortunately, Thule does not offer repair instructions for their replacement parts. That said, this hinge is pretty easy to install as there are no fasteners. It just simply pops on and off using a ball and socket mechanism. If you can't... view full answer...
You certainly can order just the hardware to install Curt trailer hitch # 13147 on your 2012 Subaru Forester. You will need # RHK and just enter the hitch number and choose the Curt as the manufacturer where indicated. Once the order is placed our warehouse team will assemble the proper kit to send to you.
I have included a link to the installation instructions for the hitch and a video showing a typical installation as well for you. view full answer...
Good news! I can help you get the correct Draw-Tite hardware for your 2017 Subaru Forester trailer hitch.
The Draw-Tite # 75876 is confirmed to fit your vehicle. This will be the number for the "Hitch Item Number" you will place in the box on the Replacement Hardware Kit # RHK product page. Then simply pick the Draw-Tite manufacture from the drop down box and then hit the add to cart button. This will get you all the correct original hardware so that you can install your hitch to your... view full answer...
As long as you've got a 3500-lbs EZ Lube axle then you can use the #84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axle - 1-3/4" Diameter # TRU74FR to replace your spindle; if you don't have EZ lube axles then you'll want to use the #84 Spindle for 3,500-lb Trailer Axles - 1-3/4" Diameter # TRU64FR and Brake Mounting Flange for 1-3/4" Round Trailer Axles - 2K # 4-34. Both of these spindles take # L68149 inner and # L44649 outer bearings.
To replace the hubs you'll want to use... view full answer...
The etrailer Trailer Hitch Receiver # e98839 for your 2015 Subaru Forester uses 1/2" mounting bolts. You will need the Fish Wire Bolt Leader # C58400 if you do not have the ones that come included with the receiver.
If you are in need of new hardware the Replacement Hardware Kit # RHK will allow you to get all the hardware for the receiver. view full answer...
In regards to the Thule EasyFold XT 2 E-Bike Platform Rack part # TH903202, the lock codes are no longer printed on the face of the core as they once were. Therefore, you will need to get new lock cores if you don't have your key number. In order to do this, you will need to have the lock cores unlocked and so long as they are you can obtain the Thule One-Key System Lock Cylinders part # TH450400 and change them out with the included change key. If the cores are locked then you need to... view full answer...
You're looking for the Replacement Lid Support for Yakima Cargo Boxes # 8880683, which will be the direct replacement for your broken Yakima support. You can re-use the hardware from the old hinge. view full answer...
Yes there is!
The Yakima DoubleDown Ace 4 Bike Carrier Y02451 fits both 1-1/4" and 2" hitches but if you do not have the adapter sleeve you need Replacement Adapter Sleeve # Y8890342. This will allow your DoubleDown Ace to be used with a 2" hitch. view full answer...
The Hidden Hitch trailer hitch is no longer available and has been replaced with the Draw-Tite Max-Frame, part # 75876. Hidden Hitch was made by the same manufacturer and is exactly the same as the Draw-Tite version.
Enlarging the holes on the vehicle are not always required but can be easily done with a rotary tool or a file if needed.
We do offer a Class ll hitch for your 2017 Forester. It is the Curt, part # C12100. This hitch has a 1-1/4 inch receiver opening.
I recommend going... view full answer...
The closest alternative we offer for the # C18115-FAR replacement fairing would be the Rhino Rack # RRRF3 which is 44 inches long as opposed to the Curt # C18115-FAR which is 1 inch longer. The problem you'll run into by attempting to use a different fairing is that the mounting holes won't line up.
I'd recommend going with the fairing that was designed for use with your basket, the # C18115-FAR. view full answer...
According to my contact at Dometic, that thermostat is no longer available as a replacement part. Unfortunately, this means the only solution is to replace the entire fan.
I recommend the Fan-Tastic Vent Roof Vent # FV803350. This has 3 manual speeds, a rain sensor, powered arm, and a thermostat. If you would like to have a remote we also have the # FV807350. This has the same features as the other fan but adds the digital remote as well as 13 speeds. view full answer...
We have the Replacement Hardware Kit # RHK for trailer hitch receivers. Be sure to enter the hitch item number when ordering to not delay the process. This will ensure you get the hardware for the EcoHitch Hidden Trailer Hitch Receiver # 306-X7216 which fits your 2018 Subaru Forester. view full answer...
I called my contact at Redline, and they told me that they use the same lock and key for their flush mount door latches. So you could order 4 of part # L1883 and they would all be keyed alike. If you need a larger latch, 4 of part # L3980 would also be keyed alike. Both of these flush mount locking door latches use the same key number. view full answer...
Choosing the correct wheel holder will depend on the rack you currently have as each will be specific to the manufacturer and rack. With that being said, the Replacement Universal Wheel Holder for Hollywood Racks Sport Rider E-Bike Rack # HR39FR and # HR59FR will fit the right and left sides of their models # HLY84FR, HR1455Z-E, and HR1450Z-E. If you have one of these models of Sport Rider, these will definitely be the correct replacements for you.
If you do not have one of these racks,... view full answer...
Yakima did make the Subaru-branded bike rack but they do not offer any replacement parts directly; these proprietary parts can only be purchased from Subaru.
Your Forester could be equipped with either a 1-1/4-inch or a 2-inch hitch receiver. The diameter of the hitch pin will be 1/2-inch for 1-1/4-inch hitches or 5/8-inch for 2-inch hitches. You can measure the size of the receiver opening on your hitch (or the hitch pin hole itself) to determine which size pin you need.
If your hitch... view full answer...
We don't have a kit for the RIde-On Adapter TH532 without the crossbars, but we do carry all of the parts individually.
4 of the # 915-0625-54
4 of the # 853-2154
4 of the # 853-2156
4 of the # 853-5267
4 of the # 753-2854
4 of the # 936060054
4 of the # 853-5269
8 of the # 853-5293
1 of the # 853-5270-02
1 of the # 853-3593 view full answer...
We do have what you need, but the Replacement Strap for Thule Caravan Quest Roof Mounted Cargo Bag # 853-5907 is not the correct replacement strap for your Thule Outbound Rooftop Cargo Bag # TH868.
I contacted the manufacturer and the correct replacement strap for your Thule Outbound cargo bag is the Replacement Strap for Thule Tahoe Roof Mounted Cargo Bag # 8535494. view full answer...
I'm not seeing a part number on the sticker shown in the photo, but if the hitch is part # C13409 it will fit a 2019-2021 Subaru Forester. The hitch part number might be located elsewhere on the hitch, and would be indicated by a 5 digit number beginning with the number 1.
If that's what you have, you can obtain replacement hardware using our # RHK kit. Click the provided link, and on the product page type 'C13409' into the provided field, then choose 'Curt' from the drop down menu.
If... view full answer...
The replacement inner tube for the Yakima Rack and Roll Trailer # Y08106 or # Y08107 you are looking for is part # Y8880283.
I have linked it to this page for your purchasing convenience. view full answer...
Go To Results