I contacted Thule in regards to your question. The Thule Crossbar Set - Hybrid Part Number: SOA567X060 from Subaru uses the Thule AeroBlade Load Bars ARB47. The correct drivers side endcaps for those load bars is the Replacement Endcap for Thule Aeroblade Load Bars # 752-2867001.
We also have the passenger side available which is Replacement Endcap for Thule Aeroblade Load Bars # 752-2867002. view full answer...
The Saris Bones EX 3 Bike Rack - Trunk Mount - Adjustable Arms # SA803 and the Saris Bones 2 Bike Rack - Trunk Mount - Adjustable Arms # SA805BL are both confirmed to fit your 2019 Subaru Crosstrek. Both will utilize the Anchor Straps for Saris Bones, Bike Porter, and Sentinel Bike Racks - 80" Long - Qty 2 # SA2047 you referenced as replacement straps. They come with two straps that do have the rubber coated hooks so you will need to order 3 to replace all 6 straps/hooks. view full answer...
Here is a list of our single axle boat trailer fenders which are galvanized. You will need to verify which will work best on your 1998 Escort boat trailer.
CE Smith Single Axle Trailer Fender 8" Wheels # CE17700G
CE Smith Single Axle Trailer Fender 12" Wheels # CE17701G
CE Smith Single Axle Trailer Fender 13" Wheels # CE17800G
CE Smith Single Axle Trailer Fender 14"-15" Wheels # CE17900G view full answer...
The Replacement Lock and Key for Trunx Roof Cargo Box # CTC-CAMLOCK-18M-2860 is actually key/lock core specific. If you order two of these they will both be the the 2860 key/lock core so they will be keyed alike. I have attached a link below to all of the available replacement locks and keys if you would like to choose a different number. You can find the price listed on the product page. view full answer...
For your 2018 Subaru Crosstrek the Curt hitch part # C13382 is a confirmed fit for a 2 inch hitch and the part # C12184 is the correct fit for a 1-1/4 inch hitch. The part numbers you mentioned are not a fit for your vehicle so they will not work. view full answer...
We do!
The hitch we have that fits your 2019 Subaru Crosstrek Hybrid is the Class II Draw-Tite Trailer Hitch Receiver # 36644. This is designed to fit both Hybrid and Non-Hybrid models which is why you've probably been seeing some information that seems to be conflicting.
If you're looking to use this for a bike rack I recommend checking out the Hollywood Racks Destination # HLY94FR which is a lightweight platform rack that's compatible with your everyday bikes.
Attached is an installation... view full answer...
We have exactly what you need.
To replace the mounting hardware for the Curt Trailer Hitch Receiver # C13382 you purchased you will need the replacement hardware kit # RHK.
When on the product page of the # RHK you will need to select Curt from the drop down menu, and then enter 13382 as the hitch number.
I included videos for both of the products mentioned for you to take a look at. view full answer...
For your Stay In Play Duo # SM99251, the Replacement Breakaway Switch Pin for SMI Supplemental Braking Systems is # SM99905. If you need the entire switch, then I recommend the Replacement Breakaway Switch for # 3802348 which includes the pin and switch. view full answer...
To get the hardware needed to install the Curt Trailer Hitch Receiver # C13135 on your son's 2016 Subaru Crosstrek you will need to order the Replacement Hardware Kit # RHK. You will need to enter the hitch number(13135) when ordering to ensure you get the correct kit for your receiver. view full answer...
Both the Curt # C13135 and the Draw-Tite # 76084 trailer hitches are excellent options to use for carrying a bike rack with your 2017 Subaru Crosstrek.
Personally I like the Draw-Tite a little better because a safety strap is not required, but some people don't mind using the strap # 18050 so it really comes down to preference.
Both hitches will allow you to use your Dr. Tray to carry your bikes around.
I have attached installation videos for each trailer hitch for you to reference. view full answer...
The Replacement Trailer Hub Bearing # 15123 and the Replacement Trailer Hub Bearing # LM67048 have the same inner diameter so both would fit the spindle correctly. The race inside the hub is where the difference in bearings would be, so if you traded out the entire hub to pair the bearing with the corresponding race there wouldn't be an issue. view full answer...
We do have the Replacement Hardware Kit for Trailer Hitches # RHK available to get the replacement hardware. You will need to select "Curt" from the manufacturer drop down and enter the hitch model number in the "Hitch Item Number" box.
You will also need to be sure that the hitch model you have works on the car you are planning to move it too. We have the Curt Trailer Hitch Receiver # C13135 (2" receiver) and the Curt Trailer Hitch Receiver # C11286 (1-1/4" receiver) as Curt hitches that... view full answer...
We sure do!
What you'll need to order is part # RHK (replacement hardware kit). Use the provided link, and when you're taken to the product page, simply type the hitch part number into the box, which is # C13135 and choose 'Curt' from the drop down menu as shown in the provided photo. view full answer...
Yep, we sure do have the replacement locking cable you are looking for. What you need is the Replacement Locking Cable Assembly for Yakima Fulltilt and Fullswing Bike Racks # Y54FR.
This is the correct replacement locking cable for the following Yakima bike racks:
- Yakima FullTilt 5-Bike Rack
- Yakima FullSwing 4-Bike Rack
- Yakima FullTilt 4-Bike Rack view full answer...