If you will be carrying any bikes that do not have a top frame bar that goes straight across (like a typical men's bike would) then I recommend using bike adapter bar # 64005. This will allow you to carry those bikes more level and will provide better ground clearance. I have to use these adapters and without them my wife's bike would be at a severe angle and I would not be able to load my son's bike at all. I have linked a video showing how the adapter works. view full answer...
There are actually two different size bolts used to install the Curt # 13581 on your 2008 Mitsubishi Outlander. The Bolt that will line up with the tow hook will be a standard 1/2-13 thread, but the other 6 bolts will be M10 x 1.25. If the weld nuts are looking gummed up to the point of needing a tap or thread chaser, I highly recommend first soaking them in WD-40 and giving them a good scrub with a nylon tube brush, like the # 814092, to get the majority of the gunk out. This will give... view full answer...
I have a great hitch that will fit your 2022 Mitsubishi Outlander. Unfortunately, I confirmed with Draw-Tite that the Draw-Tite Max-Frame Trailer Hitch # DT97GR will not fit your vehicle. However, we do carry a great alternative that will fit: the Curt Trailer Hitch Receiver # C87WR. The Curt hitch will provide you with the same 525 pound maximum tongue capacity and the 3,500 pounds of gross trailer weight capacity as the Draw-Tite. You also receive the benefit of the Curt hitch being produced... view full answer...
I have attached a link to all of our cargo carrier with ramps that will fit a 2 inch hitch receiver.
I recommend The Flint Hill Goods 30" x 50" Wheelchair Carrier w/ 48" Ramp - 2" Hitch # FHG77ZR. This is one of our most popular cargo carriers with a ramp. It has a 48" long ramp and the carrier will fold up toward the vehicle when not in use. It also comes with an anti-rattle device to prevent movement of the carrier inside of the hitch.
This ramp allows 14 inches from the center of... view full answer...
We do have a hitch and 4-way wiring to fit your 2023 Mitsubishi Outlander PHEV.
The Curt Trailer Hitch Receiver # C86FV will fit your PHEV version of the Outlander and provide you with a 2" trailer hitch receiver. You can then use the T-One Vehicle Wiring Harness # TK46VR to provide the 4 way plug.
The etrailer Ball Mount Kit # 989900 can be added to round out a tow package. view full answer...
The best hitch for your 2023 Mitsubishi Outlander is the Curt Hitch item # C87WR. This hitch is custom fit and bolts to your Outlander with included hardware. It has been confirmed to fit all models of the 2023 Outlander whether you have the Sport or not. It is a class III hitch with a 2" receiver that has a 525 lbs maximum tongue weight and a 3,500 lbs towing capacity.
For a e-bike capable bike rack, I recommend the Hollywood Racks Destination E Bike Rack item # HLY66ZR. This frame mounted... view full answer...
Yes! We do have a hitch available for your 2022 Mitsubishi Outlander. For a great hitch option, I recommend the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C87WR. The Curt hitch provides 525 maximum tongue weight capacity and 3,500 pounds of maximum gross towing capacity. In order to make sure that your vehicle can accommodate this much weight, I recommend confirming with your owner's manual. Also, if you have a hands-free hatch sensor, this hitch will work with the sensor... view full answer...
Yes, you will absolutely be able to carry a 4-bike rack on your 2022 Mitsubishi Outlander with the Curt hitch that fits, which is the following part number:
- Curt Trailer Hitch Receiver # C87WR
The 525 lb tongue weight of the # C87WR is enough to handle any 4-bike rack and its bikes, even the ones that weigh the most and have the most capacity.
For example, the heaviest you can get is the 291-1/2 lb total (91-1/2 lbs for the rack and 50 lbs per-bike) of the Hollywood Racks Sport Rider... view full answer...
We have the Universal Installation Kit for Trailer Brake Controller # ETBC7 that will allow you to install a 7-way and brake controller on your 2018 Mitsubishi Outlander PHEV. I do not see an aftermarket option that is plug and play for your Outlander. You will be able to plug in the 4-Way # C59496 the dealer would have installed into the 7-way that comes with the kit. And run the additional wiring for the charge line and brake controller with the components that come with the kit.
I... view full answer...
You are more than welcome to retrofit your older cargo box using the Thule Quick Grip Mounts # TH05738 but we have not used these clamps on anything but Thule boxes like the discontinued Atlantis and Force cargo boxes. I cannot guarantee the safety of your box being mounted with these clamps. If you are going to do this custom set up, just be sure to use rather large metal plates. The more surface area you are covering with the brackets the better. Make sure to cut holes in the metal bracket... view full answer...
First thing you'll need for your 2003 Mitsubishi Outlander is a trailer hitch like the Curt hitch part # C12293 which is a confirmed fit and will work well. Next you'll need trailer wiring. Which for that you'd want the # C55565 which is a confirmed fit too.
For a ball mount you'd then want the part # 3591 and for hitch balls part # 19258 for a 2 inch ball and part # 19256 for a 1-7/8 inch ball. view full answer...
That is an interesting project you have there, and I called my friend in Yakima to discuss how it could fit. Since Sylvan Sport is not a brand we work with and can test on, we don't have the information to give confirmed fits. I can give my recommendation though based off my experience with kayak trailers.
I am curious about how you can fit 4 bikes and two kayaks onto your bars. A close equivalent of the Go Easy Trailer is the Yakima EasyRider # Y08129. The EasyRider uses 78" HD Bars #... view full answer...
The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13163 excludes the PHEV. However, there is a 2018 Mitsubishi Outlander PHEV fit and it is # C13398. This will work well for bike racks and other accessories.
If you will be towing, I recommend the ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit # 119250KIT that will not require any splicing into your vehicle wiring. The zero contact interface sensors will work well to... view full answer...
We do have some trailer hitch and wiring options for your 2014 Mitsubishi Outlander. The most popular hitch option is Curt hitch # C13163.
If you plan on doing some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag.
If the ball mount kit does not have the right rise... view full answer...
I can get you set up with everything you need to add a brake controller to your 2014 Mitsubishi Outlander. You were correct in starting with the 4-way like # 118482.
You will also need the Universal Installation Kit for Trailer Brake Controller # ETBC7, which will give you a 7- and 4-way trailer connector (which you will plug your trailer's 7-way into), circuit breakers and the rest of the hardware needed to install a brake controller.
As for the brake controller itself, I strongly recommend... view full answer...
To install the Thule Aeroblade Edge Roof Rack part # TH7602-TH7603 to any vehicle, including your 2018 Mitsubishi Outlander, a fit kit is required. I apologize for any confusion on that but you'd need the fit part # THKIT3128 that you referenced as well. I tried to find on our site where it was listed without a fit kit but was not able to, but with just those two part numbers you'd be set!
I attached a link to an install video for this exact rack on a 2018 Outlander just like yours for... view full answer...
The Thule T2 Pro XTR for 2 inch hitches part # TH83JV or for 1-1/4 inch hitch part # TH23JV are very nice bike racks that I would recommend highly. They only touch the bikes at the tires and can tilt up when not in use. Many refer to these as best options for carrying two bikes.
Basically any bike rack designed for a 2 inch hitch is going to fit the Curt hitch part # C11363 you referenced which is a fit for your 2017 Mitsubishi Outlander. I attached a link to a page that has all of the... view full answer...
In order to use a cargo carrier like the Flint Hill Goods 60" x 22" Cargo Carrier part # FHG49ZR on a 2023 Mitsubishi Outlander you just need a trailer hitch. I recommend the Curt Trailer Hitch Receiver part # C87WR as it is a bolt-on fit. The Flint Hill Goods 60" x 22" Cargo Carrier requires a 2" receiver and that's exactly what the Curt Trailer Hitch Receiver has so there will be no issues. The weight capacity of the hitch (525 lbs) also exceeds the weight capacity of the carrier (500... view full answer...
The Rhino Rack ROC25 roof rack part number # RR65GR is a confirmed fit for the fixed mounting points of your 2019 Mitsubishi Outlander and would work great. This will give you an aero bar style rack that that has flush feet so it looks OEM yet doesn't cost nearly as much. view full answer...
I am not certain which crossbars you were speaking of, but I have confirmed with Thule, Yakima and Rhino Rack that their crossbars shown in the link I provided will all fit the OEM side rails of your 2003 Outlander.
Rhino Rack offers a strong and attractive yet reasonably priced option, which consists of the following parts:
-44 inch Vortex Aero crossbar in silver as part # RRVA118S-2 or in black as part # RRVA118B-2
-SX Series Leg Kit, part # RRSX100 view full answer...
Go To Results