The shipping weight of the Curt hitch is 43 pounds. The actual hitch will weigh a few pounds less.
For wiring I recommend the # 118482 because, over time this harness has proven to be more durable and reliable than the others offered. view full answer...
The Curt Trailer Hitch Receiver # C87WR will fit all trim levels of the 2022 Mitsubishi Outlander. Since The Outlander Sport and Outlander PHEV are different models this receiver will not work on those vehicles.
The Curt Trailer Hitch Receiver # C13398 is the last hitch we have confirmed to fit the Outlander PHEV and it fits the 2018-2020 model years.
The Curt Trailer Hitch Receiver # C13079 is the last hitch we have confirmed to fit the Outlander Sport. It fits the 2011-2021 model years. view full answer...
The T-One Vehicle Wiring Harness # 118277 is only compatible for the 2016-2020 Mitsubishi Outlander with factory tow package. We do have the Curt T-Connector Vehicle Wiring Harness # C43WR which is designed for vehicles without a factory tow package but can also work on vehicles with the factory tow package but will not use the factory wiring. If you have the PHEV model you will need the Kit # C59496.
If you wish to still use the factory tow package wiring you will need to order the components... view full answer...
The Yakima RocketBox Pro 14, # Y07192, will fit the Thule bars on your 2010 Mitsubishi Outlander, as you have mentioned, and the width of the box should be compatible as well. You mentioned that distance between the side rails at the back of the vehicle is 39 inches. The RocketBox is 33 inches wide, so it will just fit (the mounting locations are actually further in so there is more space than it would seem).
In terms of the box interfering with the rear antenna there are a couple of... view full answer...
When I reached out to my contacts at Curt they confirmed that the Curt Trailer Hitch Receiver # C13163 will not fit the 2015 Mitsubishi Outlander PHEV model. They had no trailer hitches that are confirmed to fit the PHEV model of the Mitsubishi Outlander.
The best way to carry your bike racks on your 2015 Mitsubishi Outlander is to use a truck mounted bike rack. Our Saris Bones EX 2 Bike Rack - Adjustable Arms - Trunk Mount # SAR83FR is one of our most reliable and dependable racks. If... view full answer...
I have a great hitch that will fit your 2022 Mitsubishi Outlander. Unfortunately, I confirmed with Draw-Tite that the Draw-Tite Max-Frame Trailer Hitch # DT97GR will not fit your vehicle. However, we do carry a great alternative that will fit: the Curt Trailer Hitch Receiver # C87WR. The Curt hitch will provide you with the same 525 pound maximum tongue capacity and the 3,500 pounds of gross trailer weight capacity as the Draw-Tite. You also receive the benefit of the Curt hitch being produced... view full answer...
The Yakima BackSwing # Y02483 will work with any bike rack that has a 2 inch shank. Unfortunately, it cannot be used with reducers, extenders, or adapters. So if your Kuat has a 2 inch shank, you are good to go. view full answer...
The Tekonsha Primus IQ Trailer Brake Controller part # TK90160 is an excellent option for a 2014 Mitsubishi Outlander and what I recommend. In regards to installation, you'll need to start with a 4-way and then adapt this to a 7-way using the T-One Vehicle Wiring Harness part # 118482 and Brake Controller Install Kit part # ETBC7. view full answer...
It will! You do have the correct fit for your 2018 Mitsubishi Outlander PHEV from EcoHitch:
- EcoHitch Stealth Trailer Hitch Receiver # 306-X7379 view full answer...
The AirBedz XUV Air Mattress with Built-In Rechargeable Battery Air Pump part # 341031 fits all models of the Mitsubishi Outlander. The dimensions of the bed inflated are 66" long by 52" wide by 10" deep if you would like to compare that measurement to the space that you have just to be sure. view full answer...
With most, if not all, 2-arm bike racks a woman's bike would not be able to be carried level which can affect the center of gravity and ground clearance between the bike and the road. And a step-through style frame would not fit. But there is a solution to use a hanging bike rack like # TH9024XT and women's bikes.
You can use a bike adapter bar, # TH982XT. This bar clamps around the handlebar gooseneck and the seat post to provide an artificial top tube allowing you to carry the bikes... view full answer...
That is an excellent question and the answer is that your 2014 Mitsubishi Outlander will need to use the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C56189 with the Submersible, Under 80" Trailer Light Kit # TL5RK due to the amperage draw you referenced.
The Curt kit has a max amperage of 3 amps per circuit, which will be needed for the 2.5 amps of the trailer light kit; the T-One Vehicle Wiring Harness # 118482 has a 2.1 amp capacity, as you noted, and... view full answer...
I have a solution for you, but the Curt # C13079 is only a confirmed fit on the Mitsubishi Outlander Sport models. Instead, you'll want to use the Curt # C13163, which is confirmed for the Outlander (non-Sport and non- Plug-in Hybrid vehicles). This is also a Class III hitch like the C13079 and will offer you the same no-drill installation.
If you're going to be towing with your new hitch, you'll also need a wiring harness, ball mount and hitch ball to round out a complete towing package.... view full answer...
Yes, the Curt Trailer Hitch Receiver # C87WR is confirmed to fit all models of the 2022 Mitsubishi Outlander. This hitch is made in the USA, has a bolt-on, no-drill installation and will provide you with a 2" receiver opening which is the most common size used for hitch mounted accessories such as bike racks, cargo carriers and ball mounts.
To round out a towing package for your 2022 Mitsubishi Outlander you can pick up the T-One Vehicle Wiring Harness # TK46VR and the etrailer Ball Mount... view full answer...
The Curt # C13163 will work great for you. The hitch comes with bolts for installation. You may want the Nylon Tube Brush - 1/2" # 814092 and some penetrating lubricant to clean your factory frame weld nuts.
If you will be towing with this hitch, then I recommend wiring harness # 118482 which will install behind your tail lights and draw power directly from your vehicle battery to protect your vehicle electronics. I've attached an article to help with routing that power wire.
Finally... view full answer...
There is a wiring harness available for your 2012 Mitsubishi Outlander so long as the vehicle has the factory tow package. If so, you want to get the Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector # C56102. I've added links to a video review for you to take a look at. view full answer...
I have a suspension enhancement kit I can recommend for your 2011 Mitsubishi Outlander, the SumoSprings kit part # CSS-1125R, but there are no options from Firestone we can guarantee will fit. I wish I could say that the Firestone # F4182 would work for you but it's not a tested and confirmed fit.
The Sumo Spring kit though will work great and wont' require you to monitor air pressure in air lines either. view full answer...
I do have an option for you but the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part # 118482 is not a fit for the hybrid versions of the Outlander.
I recommend the ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit part # 119250KIT which is the only option available for the Hybrid Outlander that does not require splicing into the wiring. The ZCI connections clamp onto your OEM tail light wiring during installation.... view full answer...
The Curt Friction Sway Control for Weight Distribution Systems # 17200 may be affected by a longer shank, though you'd need to take a measurement to find out. The sway bar's attachment ball must be centered 24" straight back from the center of the coupler; if you take that measurement and there is still enough room for you to mount the attachment ball you will be find to use the friction sway control bar. view full answer...
Go To Results