The combination you mentioned works great for your setup!
On a 2014 Ford Edge without rails or crossbars, the Rhino-Rack Vortex Aero Crossbars, part # RRVA137B-2, is a highly-rated crossbar with a lot of versatility. They're aerodynamic and extend past the roof rack legs, giving even more space for mounting your accessories. They also have built-in C-channels for channel-mounting accessories. I've included a link to an installation video for you.
Keep in mind that in order to use these... view full answer...
I would be happy to help!
Since your 2020 Ford Edge already has a 4-way connector installed you will just need the # ETBC7L which was created specifically for the Curt Echo Wireless # C51180 you were wanting. This kit will plug in to your existing 4-way connector and just require you to run the black wire to the positive terminal of your battery with the included 40 amp circuit breaker, and ground the white wire to the frame of your vehicle.
The # C51180 does not require the brake output... view full answer...
The Rhino Rack roof rack part # RRVA126B-2 and # RRSX024 has been confirmed as a fit for your 2015 Ford Edge with raised rails and would work well for your vehicle. Rhino Rack test fit this rack on your 2015 Ford Edge and they determined that it fits and works well. We haven't had any customers come back with your exact vehicle and say that it fit yet, but Rhino Rack thoroughly tests the fits of their racks so we can guarantee it will fit. view full answer...
The Curt Trailer Hitch Receiver # C13234 is confirmed to fit the 2015 Ford Edge SE, SEL, Sport and Titanium trim levels.
The current availability is shown on our product page. Be sure to look at the In Stock number for what is currently available.
The Curt T-Connector Vehicle Wiring Harness # C56272 will give you a 4-way flat trailer connection on the SE and SEL trims.
The Curt T-Connector Vehicle Wiring Harness # C56292 will give you a 4-way flat trailer connection on the Sport and... view full answer...
To remove the driver's side WeatherTech Front Auto Floor Mat # WT448151 in your 2015 Ford Edge, you will want to gently pull up on the floor mat at the back of the mat to release the attachment points of the floor mat from the hold down points on the vehicle's floor. It is a good idea to slide your hand under the mat to hold the attachment point down while pulling up on the floor mat. It is possible to pull the attachment point out of the carpet if it is not held down while removing the... view full answer...
If you order the replacement hardware kit # RHK and enter the hitch number and manufacturer where indicated on that page then our warehouse team will put together the hardware listed in the instructions for that hitch. I have included a link to the instructions for you so you can see the procedure as well as the hardware that is used. view full answer...
We do have both a Draw-Tite and Curt Trailer Hitch that fits your 2017 Ford Edge Titanium, though the part you mentioned is not a fit. The hitches that fit your '17 Edge Titanium are as follows:
- Draw-Tite Max-Frame Trailer Hitch Receiver # 75234
- Curt Trailer Hitch Receiver # C78KR
These are essentially the same hitch, with the difference being the Curt is made in the USA and the Draw-Tite is not, while the Curt also has a bit of a glossier finish, which some people like. But apart... view full answer...
The correct Thule Square Bar kit for your 2017 Ford Edge is Thule SquareBar Evo 50" Crossbars # TH712300, Evo Feet # TH710501, and fit kit # TH145074.
Unfortunately, your 72" Thule Square crossbars won't fit on your 2017 Ford Edge for two reasons: length and compatibility. The recommended length for crossbars of a Ford Edge is around 50" long. Too long crossbars will result in excess overhang that can be illegal in some areas especially if it's wider than your car.
As for compatibility,... view full answer...
It sounds like you have a pretty good handle on what you need.
I'd recommend you begin by choosing a brake controller. I'd recommend a proportional controller like the Tekonsha Prodigy P2, part # 90885. A proportional controller has internal sensors that can determine how quickly the tow vehicle is braking, and then send the proper amount of voltage to the trailer brakes so that the vehicle and the trailer brake at the same rate. This leads to safer, more predictable braking. To install... view full answer...
Between all three setups you really only have two components that have to match between brands with the tow bars and base plate kits. So with the Blue Ox base plate kit part # BX2190 that fits your 2009 Ford Edge you'd need a Blue Ox tow bar like # BX7420. With the Roadmaster # 4408-1 you'd need the tow bar # RM-520, and Demco # DM9519210 you'd need the # DM9511012.
I really like the Blue Ox setups as they are really well-made and easiest to use.
For lighting you can use the diode kit,... view full answer...
With all the nooks and crannies in a roof basket, like your Stallion # 288-09200, I strongly suggest not going through a mechanized car wash. However, there will be no issue going through a no touch style one as there is nothing that could get caught on the basket. If this is not an option though, you will need to remove the basket, unfortunately.
If you cannot get enough purchase on the knobs to loosen them, you might try using a crescent wrench. This sounds weird, but it may allow you... view full answer...
Yes, the Rockwell trailer axles are made to the standard axle dimensions so the Electric Trailer Brake Kit # AKEBRK-7-SA that you referenced will fit and work well on a 7k Rockwell trailer axle like yours.
I attached an install video for this kit for you to check out as well. view full answer...
It sounds like you are interested in a hanging style bike rack. If that is the case, the best option for this with the features you are looking for is the Thule Hitching Post Pro part # TH934XTR. The Hitching Post has anti-sway cradles built-in so don't have to worry about the bikes coming into contact with one another or the vehicle. It also has an anti-rattle hitch pin so there will be little movement in the bike rack itself.
The Hitching Post has a tilting feature so you can get into... view full answer...
I recommend installing the Draw-Tite Trailer Hitch Receiver # 75686 on your 2010 Ford Edge Sport. I feel this one looks better than the etrailer # e98870 you found as the Draw-Tite has a hidden cross tube which will sit behind the rear fascia.
The Curt T-Connector Vehicle Wiring Harness # C56329 will give you a 4-way flat connector. This is the most common connector used on small single axle utility trailers.
Our Ball Mount Kit # 989892 will provide you with a ball mount having a 2-3/4"... view full answer...
The best hitch for a 2023 Ford Edge is going to be the etrailer item # e36RR. This hitch is custom fit and bolts to your Ford Edge with included hardware. This is a class III hitch with a 2" receiver.
I really like this hitch because the crosstube installs completely behind the rear bumper cover. This leaves only the 2" receiver visible so you won't have to worry about it hanging down or seeing much of it.
Uhaul trailer's require 4-way connectors. There are two options for your vehicle... view full answer...
For your 2016 Ford Edge Sport I recommend the 2-inch Class III hitch option over the 1-1/4-inch Class II since it will give you a better safety margin for handling the weight of your chosen bike rack and bikes. Plus a 2-inch hitch will be able to work with more accessory items, such as a cargo carrier like # C18151, in case that is ever in your future plans. Considering the small price difference, a Class III hitch like # 75234 is usually the better choice. In terms of appearance, the Draw-Tite... view full answer...
There could be a couple of issues here. The more lights you add, the more power they draw. If the combined amperage draw of the lights exceeds the amperage rating of the vehicle side wiring system then either some lights will not light up or you could blow a fuse on the vehicle side. The solution is to switch everything over to LED lights which draw only a fraction of the power of incandescent lights.
The other possible issue is a bad ground. You mentioned the lights you want to add have... view full answer...
Trailer wiring harness # 118496 is compatible with LED lights as well as incandescent lights on a trailer. I have included a link to the installation instructions to the right for you. view full answer...
RTV high temperature silicone is what you are looking for. So something such as # LT37464, # LT37467, or # LT37466 would work for you. This is for oil seals that have metal on the outsides like # 91030. No sealant can get on the rubber parts. Just a little bit all the way around should be all you need. view full answer...
Both Thule and Yakima are great products. According to Yakima they do not classify any of their bike racks as a fit for your 2012 Ford Edge. Their fit notes indicate that the rear spoiler can not support the weight of the bike rack, and the bikes as well.
Thule classifies their Raceway, Passage, Archway, and Gateway all as a fit for your vehicle. However since your vehicle does have a rear spoiler, I recommend the Hollywood Rack Over the Top # HRF2. This bike rack carries two bikes and... view full answer...
Go To Results