I checked the installation videos for the various 1-1/4-inch and 2-inch hitch sizes offered for your 2017 Ford Edge, including hitch parts # 75234, # C13234 and # 75214. Most install so that there is about 5-inches of space from the hitch pin hole to the rear edge of the bumper cover. The Swagman G10 2-Bike Platform Rack # S64682 also has 5-inches of clearance when it is empty and folded up so this rack may touch the bumper cover.
For a similar Swagman frame-mount carrier that gives more... view full answer...
The reason for the error is the LED in the hitch cover. This has a very low power draw which causes errors in vehicles like your 2022 Ford Edge ST. The only way to fix it is to wire in an aftermarket 4-way like the # HM48030 to bypass the system or add load resistors like # DI34ZR to your stop/turn wires on your 4-way. view full answer...
It sounds like you are looking for the Pole-Tongue Adapter # EQ95-01-5950 to mount the Equal-i-zer # EQ37060ET on a 3" square pole tongue type trailer.
If you are referring to the height of your trailers frame and have a traditional A-Frame tongue then yes the Equal-i-zer # EQ37060ET will fit a 3" tall frame rail. Or if you are referring to the width of the A-Frame rails you will need to source the longer bolts as the kit comes with 3-1/2" bolts designed for a 2" wide frame. view full answer...
The simplest way to convert your 4-way flat connector on your 2023 Ford Edge to a 7-Way is by installing the Upgrade Kit # ETBC7. The 4-way will connect to this and included is a wire and circuit breaker to power the charge line portion of the 7-way. Then you will be able to add the Curt Echo # C51180 which is a wireless brake controller you will be able to operate from your smart phone using the Curt app. If you prefer to not use your smart phone we also have the Autowbrake # 3430001 which... view full answer...
Hey Adam, the etrailer hitch part # e36RR that you referenced does fit your 2017 Ford Escape Sport, does not require modifying the rear bumper, and does allow the hands free liftgate to still function but you would need to kick your foot to either side of the hitch opening. view full answer...
All of our roof rack manufacturers recommend keeping the sunroof or moonroof closed when their roof rack is installed. There is no guarantee that there will be clearance, but even if there is enough clearance the wind noise (whistling) will be too loud to be enjoyable.
Your 2018 Ford Flex with the Panoramic Sunroof should have a naked roof (no rails) so I recommend the Rhino-Rack roof rack which uses the 54" Vortex Aero Bars # RRVA137B-2, 2500 Series Legs # RRRLKVA, and DK fit Kit # DK432.... view full answer...
Hi Howard; the only springs we carry for 7 inch electric brakes are the Replacement Shoe Return Spring for 7" Dexter Brake Assembly # 46-126. view full answer...
The Hopkins Plug-In Simple Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # HM11140484 should definitely not be too short, so if it's not reaching then you either have the wrong harness, or it's the right harness but it arrived short from the factory which would be a defect.
This harness would install by plugging into your vehicle's existing wiring located behind the driver's side and passenger's side taillights. view full answer...
For a brake actuator that will fit your 3-1/2" tongue you will need a weld-on model. None of the bolt-on will fit a 3-1/2" tongue as you said. I recommend the Dexter DX7.5L A-60XL # DX43FR if you have disc brakes or the Dexter DX7.5L A-60 # DX53FR for drum brakes. These are technically listed for a 3" wide tongue as well but that won't matter with welding. Make sure to take them to a certified welder for installation. You will also need to add the # T4748800 if you're getting the drum brake... view full answer...
Hey Jaime, yes it does look like that the Yakima DeckHand Kayak Roof Rack w/ Tie-Downs # Y04083-2, Yakima SkinnyWarrior Roof Rack Cargo Basket # Y07014, and the Yakima HighRoad Roof Bike Rack # Y68DJ should work with the Yakima Rack and Roll Trailer # Y08107.
This trailer has a max spread of 48", so theoretically everything should fit without knowing the width of your kayak. view full answer...
The Advent Air Low Profile RV Air Conditioner # ADV56FR included with the Advent Air Low Profile RV AC Package # ASA78YR does not list specific starting and running watts. I was able to find information in a flyer for this AC that it has a rated wattage of 1,750W. I also pulled the Specs for the AC from the installation manual which shows power supply in amperage ratings. I have included this in the image below. The main reason they do not list starting and running wattages is the AC has... view full answer...
For your 2014 Ford Edge with a naked roof, I recommend the Rhino-Rack Vortex Aero Crossbars # RRVA137B-2, Legs # RRRLKVA and Fit Kit # DK228. The Legs are keyed alike allowing you to secure the roof rack to your Ford Edge.
The crossbar ends can be upgraded to the Rhino-Rack Locking Endcaps for Vortex Aero Crossbars # RRVA-LEC4 if you want to have locking endcaps on either set of crossbars. view full answer...
Go To Results