If you are thinking of flat-towing, an electric trailer brake controller like the Tekonsha Prodigy P2 # 90885 cannot be used for your application since your towed vehicle does not have electric brakes. Also, another complication is that we do not offer any tow bar base plates for the 1974 Ford Bronco; you would have to have base plates custom fabricated, which could be potentially very costly. I have linked an article that provides a lot of important information on the requirements for... view full answer...
Yes, for your 2022 Ford Bronco we have the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C42WR.
This wiring harness will simply plug into your vehicle's factory wiring harness and provide your vehicle with a 4-way flat trailer connector. view full answer...
What I recommend you do is use the Hollywood Racks Sport Rider SE Bike Rack for 2 Electric Bikes # HLY84FR in conjunction with the Curt Multipurpose Ball Mount with 2" Receiver for Bike Racks and Cargo Carriers # D210.
This dual adapter will give you the ability to attach a bike rack to your vehicle's hitch as well as allow you to tow your Opus OP 15.
This bike rack has a maximum weight capacity of 80-lbs per bike, for a total capacity of 160-lbs, as well as a maximum tire width of 5"... view full answer...
We can help you out with that! In order to flat tow your 2021 Ford Bronco behind your 2022 Newmar Class A motorhome you will need at least 5 main parts. Those parts are a base plate kit, tow bar, safety cables, tow bar wiring and a supplemental braking system. I have included each of those parts below, along with a brief description of their purpose.
Base Plate Kit: This is a custom fit part that provides attachment points on your Bronco for the tow bar to use.
- Roadmaster Direct-Connect... view full answer...
I have 2 different solutions for you and the biggest factor is honestly your budget. The more cost-effective option gives you exactly what you're asking for on your 2022 Ford Bronco so I'll start with that, but it also sounds like you're a pretty active person so I want to throw another setup in the works after that.
For the cost-effective setup that gives you exactly what you're looking for you need the Kuat Pivot 2 # PVP20B, the Thule Range 4 Bike RV Rack # TH9057, and the Thule Tram... view full answer...
As you already have the Curt Trailer Hitch Receiver # C76WR for your 2022 Ford Bronco Badlands you will only need the wiring. The Tekonsha OEM Replacement Vehicle Wiring Harness # TK55VR is compatible with your Bronco having LED taillights. This will include all the wiring for the trailer brake controller as we do not have a kit with all the wiring without the brake controller wiring. If you later need a Brake Controller # 90195 you will be able to add one at a later date. Rather than use... view full answer...
When it comes to installing a 7 pin connector on your 2021 Ford Bronco with LED Taillights you first will need The Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C42WR.
Next you will need The Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires # ETBC7. view full answer...
First you will need either the Base Plate # RM79RR for the factory plastic bumper or the Base Plate # RM92ZR if you have the Ford Modular front bumper. I recommend using the Roadmaster Nighthawk All Terrain, Non-Binding Tow Bar # RM-676 as the arm bodies have an aluminum construction to help resist corrosion. It also has built in LED lights which make it much easier to connect or disconnect in the dark. You may need a High-Low adapter like the 4" # RM-048-4 to keep the bars within 3" of... view full answer...
I recommend using the Tekonsha OEM Replacement Vehicle Wiring Harness w Brake Controller Adapter # TK55VR to install the Tekonsha Primus IQ Trailer Brake Controller # TK90160 and 7-way on your 2022 Ford Bronco. This Kit includes the Tekonsha Plug-In Wiring Adapter # 22292.
The Hopkins Tail Light Converter Kit # HM48895 should not be used on your Bronco as this puts the power strain on the factory wiring and does not uses a powered converter like the Tekonsha above. Also the Pollak Black... view full answer...
It sounds like you're in quite the predicament! I will explain below on what parts are needed to properly install your Curt Echo Trailer Brake Controller # C27JR onto your 2022 Ford Bronco..
Since you already have the 4 flat connector already installed on your 2022 Ford Bronco there is only one more major thing you will need and that is The Universal Installation Kit for Trailer Brake Controller # ETBC7. The # ETBC7 has a 4 flat connector at the end that will plug into your existing 4... view full answer...
To get a brake controller and 7-Way wiring installed on your 2023 Ford Bronco Wildtrak you need the following:
- 4-Way Wiring Kit # C42WR (with LEDs) or # C87BR (without LEDs)
- Universal Wiring Kit # ETBC7
- Plug-In Wiring Adapter # 22292
It doesn't look like the Bronco has any provisions for trailer wiring when the vehicle doesn't have a tow package, so I do recommend cutting the Blue wire from your OEM plug and running it to the brake controller pin on the ETBC7 with the included... view full answer...
To install a 7-way trailer connector on your 2022 Ford Bronco, you will need to first install a 4-way wiring harness and then adapt that using the Universal Installation Kit for Trailer Brake Controller # ETBC7. To get a 7-way, you first have to install a 4-way since you have no current wiring.
The T-One Vehicle Wiring Harness # TK99VR is the correct 4-way since you have LED taillights.
The Universal Installation Kit for Trailer Brake Controller # ETBC7 will come with a 7-way bracket... view full answer...
When installing a flat towing package on your 2022 Ford Broncos I recommend The following items below:
Roadmaster Direct-Connect Base Plate Kit - Removable Arms # RM92ZR
Roadmaster Falcon 2 Tow Bar - Motorhome Mount - 2 inch Hitch - 6,000 lbs # RM-520
Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267
Demco SBS Stay-IN-Play DUO Supplemental Braking System - Proportional # SM99251
RoadMaster 76 inch Single Hook, Straight Safety Cables - 8,000 pounds # RM-645-76
Roadmaster... view full answer...
The Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267 contains all the parts you need for wiring your LED tail lights on your 2022 Ford Bronco Outer Banks.
If you are using a tow bar like the Roadmaster Nighthawk All Terrain, Non-Binding Tow Bar # RM-676 you can use the wiring included in the RoadMaster Nighthawk All Terrain Towing Combo Kit # RM-9284-2.
In the event you still need everything for flat towing your Bronco the Roadmaster Direct-Connect Base Plate Kit #... view full answer...
For your 2022 Ford Bronco I recommend The Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Wire to 6-Wire Straight Cord Item # RM-152-98146-7. This completed kit includes everything that you will need to connect your RV's tail, brake, and turn signal lights to your Ford Bronco. The diodes in the kit prevent feedback and wire your Bronco to operate as a combined system. It is a one time set up and allows you to easily hook up and go instead of running magnetic lights to the... view full answer...
Yes, The Blue Ox Base Plate # BLU97XR is designed to fit all models of the 2022 Ford Bronco with a modular bumper. During the installation it will require some trimming of the bumper which includes the fascia, plastic and/or grille and some minor drilling.
If you have not yet purchased a tow bar, the tow bar wiring kit, a braking system, and safety cables I will give a few recommendations for you below and some features that put them ahead of the other towing accessories that we carry.
For... view full answer...
Adding a brake controller to your 2024 Ford Bronco Badlands will require 4-way and 7-way wiring along with the actual brake controller. I recommend the following:
-Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector # C59236
-Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires # ETBC7
-Redarc Tow-Pro Liberty Brake Controller - Dash Knob - 1 to 2 Axles - Proportional # RED24FR
The Curt wiring harness will splice into your... view full answer...
From the sound of your question, it sounds like you are wanting an option for both a 4-way and a 7-way to install into your 2021 Ford Bronco and do not currently have any wiring. For a plug-in 4-way harness, I recommend the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # TK99VR. However, you need a separate wiring harness in addition to the # TK99VR to have the 7-way installed. For that part, that is the Universal Installation Kit for Trailer Brake Controller - 7-Way RV... view full answer...
First, we'll start with a complete flat towing setup, and while we go through it I will address some of your concerns as well.
It sounds like you may be interested in using Blue Ox products to complete this setup.
In that case, the first thing you'll need is a base plate, in which the Blue Ox Base Plate Kit # BLU23XR will work great. This base plate is confirmed to fit your 2021 Ford Bronco, and will work with all Blue Ox tow bars, and when paired with select adapters, can be also used... view full answer...
It sounds like you're looking for the Extension Cord for ComeUp Winch Hardwired Remotes # CU882843.
This extension measures 16" long and will work great with your Badlands winch since they both use a 6-pin connector. If you needed a longer extension, we also have this available with a 27" extension # CU55XR. view full answer...
Go To Results