Recommended Trailer Wiring Harness for a 2022 Ford Bronco With Signature Taillights

Question

Question:

Do you have a connectorized taillight wire kit for a 2022 bronco with signature led taillights? I have a demco universal kit but want something that does not require splicing the bronco wiring.

asked by: Doug

0

Expert Reply:

Yes, for your 2022 Ford Bronco we have the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C42WR.

This wiring harness will simply plug into your vehicle's factory wiring harness and provide your vehicle with a 4-way flat trailer connector.

expert reply by: Bryce D

0

Answer 1

There are two different tail light bulbs types on a 2022 Ford Bronco, LED and incandescent. If you have LED then you need the Curt T-Connector Vehicle Wiring Harness part #C42WR or if you have incandescent then you need the Curt T-Connector Vehicle…

view full answer...

Answer 2

When it comes to installing a 7 pin connector on your 2021 Ford Bronco with LED Taillights you first will need The Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #C42WR. Next you will need The Universal Installation Kit…

view full answer...

Answer 3

Per Curt their T-Connector Vehicle Wiring Harness #C42WR uses 14 gauge wire for the harness.

view full answer...

Answer 4

It sounds like something is wrong with the Curt T-Connector #C42WR you've installed on your 2022 Ford Bronco. To start off checking you'll want to look at the 12V power connection and the ground connection. Make sure there is power getting…

view full answer...

Answer 5

Yes, it does. The Curt T-Connector Vehicle Wiring Harness item #C47WR is confirmed to fit the 2023 Ford Bronco Sport. This custom fit T-connector plugs into your Bronco's existing wiring harness behind the tail lights. This harness will provide…

view full answer...

Answer 6

For a 2023 Ford Bronco Sport I recommend the Curt Trailer Hitch Receiver #C76HR. The installation is super easy, but will require you to slightly notch out the fascia a bit to fit the receiver tube. I've attached a short video below where the…

view full answer...

Answer 7

Yes, the Curt trailer wiring harness part #C42WR is a confirmed fit for your 2021 Ford Bronco with LED taillights. This kit was actually designed for the versions of the vehicle that have LED taillights.

view full answer...

Answer 8

No, having play in the your Roadmaster D-Ring Mount Adapters #RM-035-1 can cause friction which will lead to them failing. You'll want to measure the thickness of the your D-Ring mount and order accordingly. based on the picture you provided it…

view full answer...

Answer 9

No, you can't. Those hooks are only for recovery or pulling something they're not rated to be flat towed with. You are actually going to have to remove them to install a base plate kit on your 2023 Ford Bronco. Since you have a Blue Ox Alpha…

view full answer...

Answer 10

To add a hitch to your 2023 Ford Bronco Sport, I recommend the etrailer Hitch item #e57KR. This hitch is custom fit and bolts to your Bronco with included hardware. This is a class III hitch with a 2" receiver. I really like this hitch because…

view full answer...

Answer 11

When it comes to installing trailer wiring on your 2022 Ford Maverick The Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #C47WR will not fit your 2022 Ford Maverick, but The ZCI Circuit Protected Vehicle Wiring Harness w/…

view full answer...

Recommended Trailer Wiring Harness for a 2022 Ford Bronco With Signature Taillights

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching