Expert Answers about Damon

• Are the Raised Side Rails for Roof Rack for 2019 Honda Odyssey Offered in Chrome
• The etrailer Raised Side Rails for Roof Rack part # e99034 is a fit for a 2019 Honda Odyssey but it is only offered in black, not chrome.
  view full answer...


• Replacement Frame for Ventline Roof Vent VDO434
• If the part number for the screen on a Ventline Roof Vent is VDO434 then the correct replacement frame and screen is the Replacement Screen Frame with Screen for Ventline Ventadome Trailer Roof Vents part # BVC0573-31.
  view full answer...


• Can The Friction Pads On the Reese SC Weight Distribution System Be Swapped Out For a New Style
• Yes, you can switch from the friction style pads on the Reese SC Weight Distribution System to the chain hanger style using the Chain Hangers for Reese Weight Distribution Systems part # RP58306 and Reese Replacement Weight Distribution Chain Kit part # 3216. This would be the only option I have to change styles.
  view full answer...


• What Dometic AC Units Can be Replaced with Advent Air Unit
• The Advent air conditioner units that will fit the Dometic setups and will allow the use of the Dometic controls require the setup to be using Comfort Control Center Model 3109226.005 which is used with a 5 button thermostat. Based on the year of your setup and the buttons you did mention what you have would be too old so you'd have to go with a setup that replaces all of that like for example the Furrion Chill part # FR23PV.
  view full answer...


• Replacement Reese Hitch Head For Old 55520-6 Head
• The head and spring bars that you are referencing have not been in production for about 30 years. Reese no longer carries replacement parts for for your system. I would recommend replacing your head with the Reese # RP58167 head unit and for spring bars I recommend the Reese # RP66009 replacement spring bar with 1200 pounds of tongue weight capacity. These together will get you updated to new parts that you can depend upon.
  view full answer...


• Is Kuat Pivot 2 Swing Away Hitch Extender Compatible With RockyMounts Bike Rack
• So long as your RockyMounts bike rack has a dedicated 2 inch shank like the RockyMounts MonoRail # RKY10004 then it is compatible with the Kuat Pivot 2 Swing Away Hitch Extender. The Swing Away will fit 2 inch hitches and is available to swing to either the passenger's side or driver's side. - Kuat Pivot 2 Swing Away Hitch Extender for Bike Racks - Passenger's Side # PVP20B - Kuat Pivot 2 Swing Away Hitch Extender for Bike Racks - Driver's Side # PVD20B
  view full answer...


• Solera RV Slide-Out Awning Bracket Dimensions and Attachment Instructions
• I have linked the photo I believe you are speaking of. The bracket on the Solera RV Slide-Out Awning part # LCV000182037 is right at 2" which should allow you to mount it in the space you have. We have always used the supplied fasteners which are threaded screws and have had zero issues. Using butyl tape like part # 362BT-18x1-50 also helps out in sealing the holes you create but acts as a slight buffer and helps keep any wiggling or movement to a minimum.
  view full answer...


• Can I Use the Demco 5th Wheel Rail Adapter with the Reese 5th Wheel with my 2020 Nissan Titan
• Yes the Demco 5th Wheel Rail Adapter for Nissan Titan XD OEM 5th Wheel Towing Prep Package part # Dm6200 can be used with most standard fifth wheel hitches including your Reese 5th Wheel Trailer Hitch part # RP30047. It offers a 21,000 lb. capacity which is greater than the 16,000 lb. rating of your hitch so you will not be losing any capacity from your current setup. Happy Hauling!
  view full answer...


• 7-Way Trailer Plug Adapter or Compatibility with Lance Slide-In Truck Bed Camper
• Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we do have adapters for. If you have a 7-way round, then you will use adapter # 47595. If you have a 6-way plug then you will use adapter # 47549 or # PK12728. If you have the special Lance plug, I recommend replacing it with # A7WCB which would directly...
  view full answer...


• Fork Mount Bike Rack for Rhino-Rack Roof Rack on 2017 Toyota Tundra
• You can definitely use a fork mounted bike rack with your roof rack. Assuming your 2017 Toyota Tundra is a CrewMax Cab or Double Cab your Rhino-Rack roof rack will consist of Rhino-Rack Vortex Aero Crossbars # RRVA150B-2, Rhino-Rack 2500 Series Legs # RRRLKVA and Fit Kit # DK079. There is a fork-mounted bike rack that has T-slot hardware which will allow you to mount the rack in the channels of this rack's crossbars, the Inno Fork Lock Roof Bike Rack # INXA391.
  view full answer...


• Is Tandem Axle Lift Kit RR23QX Compatible with Axle FBA-LC135-S-85-NOSS-L-NO CAMB
• Yes, you can use Tandem Axle Lift Kit # RR23QX for your trailer with two of 3500-lb axle part number FBA-LC135-S-85-NOSS-L-NO CAMB. I confirmed compatibility with my technical contact at Lippert.
  view full answer...


• Where to Wire Trailer Brake Controller In 2017 Chevrolet Traverse
• I took a look at your owner's manual and the 2017 Chevrolet Traverse has a bundle of blunt cut wires behind the instrument panel above the parking brake assembly for the electric trailer to wire a brake controller to. According to the owner's manual the harness contains the following wires: red/black: power supply white: brake switch signal gray: illumination black: ground The wires with the corresponding functions from the brake controller adapter like the one included with part # 90195...
  view full answer...


• No Space for Hitch Installation on 2005 Freightliner Sprinter 2500HC
• The Curt hitch # 13250 that you referenced is specified as a fit on the 118-inch SRW, 140-inch SRW, 158-inch SRW and the 158-inch DRW versions of the 2005 Freightliner Sprinter HC, but the base model only. If yours is an RV cutaway/cab-and-chassis with modifications and the suspension reaches all the way to the rear bumper then there is no hitch that will fit according to my contact at Curt. We do offer adjustable/universal RV hitches like # 13703 and others shown on the linked page but...
  view full answer...


• Drain Hose for 1-1/2" Diameter Valterra Waste Valve
• To connect a standard garden hose part # W01-4180 (15') or # W01-4300 (25') to your Valterra Waste Valve # T1001D you will need an adapter like part # T01-0094VP or part # T01-0091VP which has a 90 degree elbow on it. Simply remove the cap off of the waste valve then add either of the adapters with a typical garden hose and you are good to start draining!
  view full answer...


• What Ladder Racks Work with the BAK Revolver X4 Hard Tonneau Cover
• I have a few ladder racks for you that we have confirmed to work with the BAK Revolver X4 Hard Tonneau Cover but the Invis-A-Rack Folding Ladder Rack is not one of them because it installs inside the bed rails. There may however be a version of the Invis-A-Rack Folding Ladder Rack that will wok with the TruXedo Lo Pro QT Soft Tonneau Cover but I would need to know the year, make, model, and bed length of your truck in order to see if this is available. If not then we have currently confirmed...
  view full answer...


• Hitch, Wiring and Brake Controller Recommendation For 2015 Ford Transit T350 Cab and Chassis
• We do carry a hitch that could work but none of the available custom trailer hitches like part # E98842 fit the cab and chassis/cutaway models of the 2016 Ford Transit T350. They are all just for the regular cargo van/passenger van models. I recommend Curt adjustable width trailer hitch part # 13703. The adjustable width of the hitch is designed to extend from 22" to 72" wide. Cab and Chassis models are normally 34 inches wide so this hitch likely fits your frame. Since it is not a custom...
  view full answer...


• Replacement Parts For Older Model Hopkins Engager Breakaway Kit
• The Hopkins Engager's box design and mounting brackets have changed over the years. There is a Side load Hopkins Engager available and a top load style. The Hopkins Engager part # 20400 is considered top load because you can see the lid from the top of the unit but the brackets do not allow you to install the box upright on the trailer's tongue like in your photo. The old style entire unit is no longer available but the replacement box part # HM20121 is available and can be installed...
  view full answer...


• Difference Between B&W Companion 5th Wheel Hitches for Ford Super Duty With and Without Puck System
• It sounds like you are asking what has changed in regards to the B&W Companion Fifth Wheel Hitch # BWRVK3300 compared to the B&W Companion Fifth Wheel Trailer Hitch # BWRVK3500-5W and the answer is in fact the base, like you were asking. The base on the B&W Companion # BWRVK3300 is designed to fit directly in the puck system of Ford F-250, F-350 and F-450 Super Duty trucks from 2011 through the 2019 model years (this is as of 2019). I added a photo showing the legs from this hitch and...
  view full answer...


• Can BulletProof Replacement Hitch Ball Fit Other Shanks
• The BulletProof Hitches replacement ball, part # 358REPLACEMENTBALL, is designed specifically to fit BulletProof products. It may fit some others but not the Curt shank you're looking at. You can't see it in the picture on the page (There should be more added soon that will make it easier to see) but the way the ball fits with BulletProof ball mounts is inside the channel. In order for the replacement ball to fit onto the Curt shank, part # C17125, the ball needs a channel for the shank...
  view full answer...


• Which Erickson Tie Down Stake Pocket Anchors Fit 2011 GMC Sierra
• The Erickson Stake Pocket Anchors part # EM01006 are going to be too wide for your 2011 GMC Sierra but we do have the Erickson kit part # EM01003 that we do know fits your 2011 GMC Sierra so it would be the way to go.
  view full answer...