You can install the etrailer Horizontal E-Track # e62VR and drive over it just fine with a vehicle as the tracks only sit 1/2" tall - then you can secure your side by sides with a tie-down kit like part # EM98CV you were looking at.
To secure the front wheel of your dirt bikes I recommend picking up a few of the CargoSmart Motorcycle Wheel Chock # 3481731 as well as a few of the single E-Track connections # SLSZ since the wheel chock connection points won't be as far apart as what you'll... view full answer...
I have a solution for you but no we do not have anything that is designed for your 2019 Chrysler Pacifica van or that can be adapted to it. I recommend the Adjustable-Height, Folding Platform Step item # PA-275. This is a 19" long x 14" wide aluminum platform step that features 4 different height settings. Each leg adjusts independently from 7-7/16" to 8-3/4" tall. view full answer...
I took a look at the online owner's manual for your 2018 Chrysler Pacifica, and it says flat towing with all four wheels on the ground is not allowed, but so long as it is a front-wheel drive, you can tow it behind your motorhome using a tow dolly. So with that in mind you have a couple of options, which are the Demco tow dollies:
- Demco Kar Kaddy SS Tow Dolly # DM9713045
The Kar Kaddy SS is a really nice, high-quality dolly that is much simpler to use than other tow dollies in large... view full answer...
I recommend using the Curt # 13389 because of the quality of the powder coat on the Curt hitches compared to some of the other available hitches. This is a Class III hitch with a 2" receiver and is a confirmed fit on the 2007 Chrysler Town and Country models with the Stow-N-Go seats.
If you're going to be towing a small trailer with this hitch, you'll also need a wiring harness, ball mount and hitch ball. For a wiring harness I recommend using the Tekonsha T-One # 118300 because of the... view full answer...
When installing The etrailer hitch # e98854 onto your 2016 Chrysler Town and Country it uses the existing M10 and M12 bolts that should be present on your vehicle. Since your hardware is missing you will need to contact your vehicle's dealership to get the correct hardware. If you buy standard hardware from a hardware store it will take away the warranty of your trailer hitch. The etrailer hitch in my opinion is the best hitch that we offer for your Chrysler Town and Country because it... view full answer...
To replace the headlight bulbs on your 2014 Chrysler Town and Country you will choose a set of new type H11 bulbs. You only need two bulbs, not four. The linked page shows all bulbs of this type that are DOT-compliant (legal) for on-road use and these include the standard Halogen type like # VX-LH11, which is the item you referenced in your question. These are just like your factory bulbs.
If you would like bulbs that are still DOT-compliant but that are brighter than the factory bulbs... view full answer...
Long story short, the Hybrid model doesn't use a specific harness part number that's unique. The harness needed will depend on whether the vehicle has LED or incandescent taillight assemblies. When we researched the available taillight assembly part numbers, we found several different options.
According to Curt and Tekonsha, the differences between the different taillight converters/4-pole trailer wiring harnesses available for the 2018 Chrysler Pacifica are dictated by the vehicle trim... view full answer...
We have just about everything you are going to need packaged in one kit. Take a look at the 4 and 7-Way installation kit # ETBC7. This kit is going to provide a 7-Way (the existing 4-Way will just plug into the 4-Way receptacle on the adapter) and it comes with all the wiring and circuit breakers you will need to wire in the brake controller.
The only other parts you will need are a circuit tester like # PTW2993 unless you already have one, the wiring harness for the controller, # 20127,... view full answer...
Just about everything you need is available in one kit. Take a look at the 4 and 7-Way installation kit # ETBC7. This kit provides a 7-Way (the existing 4-Way will just plug into the 4-Way receptacle on the adapter) and it comes with all the wiring and circuit breakers you will need to wire in the brake controller.
The only other parts you will need are a circuit tester like # PTW2992, and, if your brake controller doesn't have a wiring adapter, you will need # 20127 (for Tekonsha or... view full answer...
To install a 7-way connector on your 2018 Chrysler Pacifica Hybrid you will first need the T-One Vehicle Wiring Harness # 118712. This will provide the turn signals, running lights and brake lights for the trailer. Next the Universal Installation Kit for Trailer Brake Controller # ETBC7 will provide you a 7-way that the 4-way connects to. It will also provide you with the wiring for a brake controller and charge line for the 7-way.
I recommend the Redarc Tow-Pro Liberty Brake Controller... view full answer...
We can help you with a trailer wiring harness for your 2004 Chrysler Pacifica that already has an aftermarket Curt hitch installed.
For the Pacifica without the factory tow package you can use 4-pole wiring harness kit # C55530 from Curt. This kit provides you with basic trailer alighting functions: brake, turn and running lights. This is all you need for a trailer without brakes and that does not have an on-board battery.
If you instead need a fully-functioning 7-way connector that provides... view full answer...
To tow a vehicle, you will need more than just the tow bar.
You will also need a base plate kit. A base plate kit attaches to the vehicle frame and provides a place to the tow bar to attach. We carry one base plate kit for your PT Cruiser, RoadMaster part # 278-1.
To use the Tow Ready Adjustable tow bar, you will need an adapter as the Tow Ready tow bar will not attach directly to the RoadMaster base plates available for your car. The adapter is RoadMaster part # RM-025. You will also... view full answer...
For the installation of the Curt Trailer Hitch Receiver # 13364 on your 2016 Chrysler Town and Country you will be reusing the bolt already in place that hold on the bumper. So you will not need to acquire any bolts unless they are missing or become damaged during removal.
If you are going to be hauling a trailer or adding on a carrier that might interfere with the visibility of your tail lights then I recommend installing a 4-way plug. The Curt Vehicle Wiring Harness # C56331 will give... view full answer...
When it comes to installing a hitch on your 2022 Chrysler Pacifica Pinnacle Hybrid # C29UR will not fit your vehicle.
Per the manufacturer The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2 inch # C13383 will bolt right up to the frame of your vehicle. It has a gross towing weight up to 4,000 pounds and a tongue weight up to 400 pounds. I would check your manual to find out what the proper towing capacity is for your vehicle.
Depending on if you will towing a trailer or not... view full answer...
As it sounds like you have a Curt Trailer Connector Adapter # C57672 on your 2013 Chrysler Town and Country you will need the Wiring Kit # 5506. This will contain the wiring, connectors and circuit breakers needed to power a brake controller as well as the charge line for the trailer breakaway battery. I recommend using the Redarc Tow-Pro Liberty Brake Controller # RED52VR. This brake controller uses a small dash mounted control knob to give it a clean look. The main unit will be hidden... view full answer...
Those are some extremely old tires. We recommend changing them every 6 years or so regardless of tread wear.
The metric size for your 20.5 x 8 - 10 tires is 205/65-10. Our most popular tire in this size is # AM1HP54. It has a load range D and max capacity of 1,330 pounds at 70 psi.
If you'd like a higher rated tire we have # AM1HP56 with an E load range rated for 1,650 pounds at 90 psi.
Both tires have a 2-year limited warranty. view full answer...
To convert your 4-Way trailer connector you will need the Brake Controller 7 & 4 Way Installation Kit, item # ETBC7, which includes everything needed to upgrade your trailer connector to a 7-Way RV connection. We have detailed installation instructions for you to review, see link.
The one other thing you will need is a No-Drill Mount Bracket, # C57202 (long) , to attach the connector to the hitch. You will bolt the bracket included in the # ETBC7 wiring kit to this bracket and then attach... view full answer...
When it comes to installing trailer wiring on your 2017 Chrysler Pacifica The T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118712 is confirmed to fit your vehicle.
The trailer harness has a simple plug and play installation that plugs into your vehicle's wiring harness, which is located behind the driver and passenger side tail lights. The harness will come out as a 4 pin flat connector.
To make the 4 flat connector to a 7 pin round connector The Universal Installation... view full answer...
According to Lipperts website you will want to replace your Series 42 step motor with the Replacement Motor for Kwikee 25 Series Electric RV Steps - 12V item # LC369506. You will need a IGML control box like the Replacement Control Unit for Kwikee Electric RV Steps item # LC379146. view full answer...
Go To Results