The Curt # C13002 Class III hitch you'd looked at would be a great choice. The hitch offers a 500 lb tongue weight capacity, so as long as the weight of the bike and the carrier you use, such as # e98873 doesn't exceed the tongue weight capacity of the hitch or that of the vehicle itself, the hitch would work well for you.
For trailer wiring, you'd use # C59496 if the vehicle isn't set up with the factory tow package or # 118259 if it DOES have the tow package. If you're not sure, a GM... view full answer...
The 2017 Cadillac XT5's should all come with a tow package port regardless of options so the trailer wiring harness installs are all plug-in play, there is no physical battery connection. I recommend the T-One Vehicle Wiring Harness part # 118720 for 4-way or part # 118276 for 7-way. These will both plug into a port under the rear bumper. view full answer...
I recommend going with the Tekonsha Primus IQ # TK90160 because it's a simple proportional controller that has a solid reputation backed by a limited lifetime warranty. To connect this to your 2004 Cadillac Escalade you just need the Wiring Adapter # 3015-P.
Attached is an installation video using the wiring adapter on a 2004 Chevy Suburban for you to check out. view full answer...
I have some alternative solutions for you but it looks like there hasn't been a fit released yet for the 2020 or the 2021 Cadillac CT5. For alternatives we have trunk mount bike racks and roof mount racks.
For a trunk mount rack I recommend the Yakima FullBack # Y02634 because it's easy to install, comes with bike and rack locks, plus it can fold up nicely for storage. You'll place the base pad 1-3/4" above your bumper and use the Hub Setting 1 for fitment. Attached is a video of me putting... view full answer...
We sell many LED replacement bulbs that have been confirmed to work on your 2005 Cadillac SRX. Check out the link I provided that has them all listed. When you pick out the new bulbs you will need to match the color of the bulb you are replacing. So if the bulb that is in need of replacing is red, you will need to buy a red bulb. view full answer...
The part number you referenced is just a roller and fabric for an awning. If you wanted to install a 12 foot wide awning on your camper you'd need a complete kit like the 12 foot # LCV000334919-362241 which comes with everything you'd need to install a 12 foot powered awning. view full answer...
I took a look at the online version of the owner's manual for your 2014 Cadillac Escalade and found that it features a towing capacity of either 8,300 pounds for the 2WD model or 8,100 pounds for the AWD model. I do still recommend verifying this by checking your copy of the manual but based on this information your Escalade can absolutely pull your Lund Pro Boat that weighs up to 4,362 pounds (as long as the weight of the trailer itself doesn't push the combined weight over the vehicle's... view full answer...
You can adapt most Kuat racks with their Shank Adapter, part # D101. This will enlarge your shank from 1-1/4 inch to a 2 inch shank.
This adapter is compatible with the Alpha, Beta, NV 2.0, NV Base 2.0, Sherpa, and Sherpa 2.0 racks from Kuat. It is NOT compatible with the Kuat NV 1.0/Original bike racks. view full answer...
The differerence between the three coolers you mentioned is the size overall. The # D13503 measures 11" Wide x 8-3/4" tall x 7/8" deep. The part # D13502 measures 11" Wide x 7-1/4" tall x 7/8" deep (slightly shorter) and the part # D13504 measures 11" Wide x 12" tall x 7/8" deep.
We recommend fitting the biggest cooler you can fit in the available space in front of the radiator. view full answer...
Yes, the Redarc Tow-Pro Elite Trailer Brake Controller part # RED44FR will work on your 2018 Cadillac Escalade and this is an excellent choice for you. In order to install this brake controller on the vehicle you will also need to use the Redarc Plug-and-Play Wiring Harness for Tow-Pro Trailer Brake Controllers part # 331-TPH-010 if you have the factory plug under your dash or the Tekonsha Custom Wiring Adapter for Trailer Brake Controllers part # 3016-S if you do not have the factory... view full answer...
The only trailer hitch that is offered for a 2013 Cadillac ATS is a class I with a 1-1/4" receiver tube opening. For this, I recommend the Draw-Tite Sportframe Trailer Hitch Receiver part # 24924 because it does not require any permanent modifications to the vehicle like the other option for your ATS would, the Curt Trailer Hitch Receiver part # C11311.
Therefore, if you need to use a trailer hitch you will have no other option but to use a class I with a 1-1/4" receiver tube opening.... view full answer...
On your GMC Yukon Denali XL, you can add a transmission cooler to your existing factory transmission cooler. I recommend Derale Series 8000 Plate-Fin Transmission Cooler Kit w/Barb Inlets - Class IV # D13504 which you were looking at due to its design.
This cooler will work well in-line of your current factory transmission cooler system which I recommend keeping. view full answer...
The Demco SBS Second Vehicle Kit for Air Force One Supplemental Braking System part # SM99209 is designed to be used when you get a new towed vehicle so you don't have to buy a new kit since you will already have the motorhome side installed. For the full kit you will need part # SM99243. The air jumper would simply be reused as well but if you no longer have this then you can use part # SM99666.
The motorhome specific air jumper is only for select models with Spartan or Freightliner chassis... view full answer...
The air shocks on your 2008 Cadillac Escalade only have the capacity for a certain amount of air and the compressor system on the vehicle is designed for that. If you add volume by installing additional air bags the system may not function properly or in a way that you want it to.
Instead of using the air bags with the air shocks I recommend using Timbren helper springs, # TGMRYS4. With this system there is no maintenance and you will not have to worry about air compressors at all. It... view full answer...
I have several floor mat options for your 2015 Cadillac SRX, however we do not have MAXpider mats confirmed to fit your vehicle. I have attached a link to all of the floor mats we offer for your SRX.
The floor mats I recommend for you are the WeatherTech Custom Thermoplastic floor mats. These floor mats have a rigid plastic core for durability. The rubberized outer shell grips the carpet and while channel and trap water and debris brought into your vehicle. For a full set in black you... view full answer...
We can help you with selecting a 2-inch Class III hitch for your 2017 Cadillac XT5.
We offer options from Curt and etrailer that you can see on the linked page. Both hitches offer similar capacities so based on lower cost I recommend the etrailer option # e62AR that you referenced. I linked a complete installation video that shows you the entire process.
Towing requires a few additional components. I suggest the etrailer.com Ball Mount Kit # 989900 which includes multiple hitch balls... view full answer...
The trailer hitches we offer for a 2015 Honda Accord are Class l hitches and have a 2,000 lb towing capacity. You will want to check your owner's manual or with your dealership to make sure you do not exceed the towing capacity of your Accord.
The trailer hitch I recommend is the Curt Trailer Hitch, part # C11496. This hitch has a 1-1/4 inch receiver opening. Since you need to have the hitch installed I recommend having this done by a qualified mechanic. The exhaust will need to be lowered... view full answer...
I do have an option for you but there is no trailer brake controller port under the dash on a 2013 Cadillac SRX. In order to install the Tekonsha Prodigy P3 Trailer Brake Controller part # 90195 you will need to hardwire using a few different parts. I have attached a list with these below.
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part # 56096 (With Tow Package)
Curt Upgraded Circuit Protected Powered Tail Light Converter part # C59496 (Without Tow Package)
Universal... view full answer...
Though the Thule EasyFold XT # TH903202 will be 6 inches longer than the Thule T2 Pro XTR # TH83JV, it is still the rack I suggest going with. This is due to how the bikes attach to the racks.
The T2 Pro XTR # TH83JV will attach to the wheels and does not allow for bikes with fenders. The EasyFold XT # TH903202 on the other hand will allow for bikes with fenders and will still work with step through type bikes. This is also rated up to 65 pounds per bike and will definitely cover your bikes. view full answer...
I pulled up an online version of the 2008 Cadillac SRX owners manual and no version of the vehicle can be flat towed with all four wheels on the ground including RWD. The only way it can be towed is with a dolly like the part # RM-2050-1 with the vehicle in reverse. view full answer...
Go To Results